2017-03-31 07:05:25 +00:00
|
|
|
## SPI slave example
|
|
|
|
|
|
|
|
|
|
These two projects illustrate the SPI Slave driver. They're supposed to be flashed into two separate ESP32s connected to
|
|
|
|
|
eachother using the SPI pins defined in app_main.c. Once connected and flashed, they will use the spi master and spi slave
|
|
|
|
|
driver to communicate with eachother. The example also includes a handshaking line to allow the master to only poll the
|
2017-04-13 03:14:35 +00:00
|
|
|
slave when it is actually ready to parse a transaction.
|
|
|
|
|
|
|
|
|
|
Please run wires between the following GPIOs between the slave and master to make the example function:
|
|
|
|
|
|
|
|
|
|
========= ====== =======
|
|
|
|
|
Signal Slave Master
|
|
|
|
|
========= ====== =======
|
|
|
|
|
Handshake GPIO2 GPIO2
|
|
|
|
|
MOSI GPIO12 GPIO12
|
|
|
|
|
MISO GPIO13 GPIO13
|
|
|
|
|
SCLK GPIO15 GPIO15
|
|
|
|
|
CS GPIO14 GPIO14
|
|
|
|
|
========= ====== =======
|
|
|
|
|
|
|
|
|
|
Be aware that the example by default uses lines normally reserved for JTAG. If this is an issue, either because of hardwired
|
|
|
|
|
JTAG hardware or because of the need to do JTAG debugging, feel free to change the GPIO settings by editing defines in the top
|
|
|
|
|
of main.c in the master/slave source code.
|
