OVMS3-idf/components/bt/esp_ble_mesh/mesh_core/transport.c

/*  Bluetooth Mesh */

/*
 * Copyright (c) 2017 Intel Corporation
 * Additional Copyright (c) 2018 Espressif Systems (Shanghai) PTE LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <string.h>
#include <errno.h>

#define BT_DBG_ENABLED IS_ENABLED(CONFIG_BLE_MESH_DEBUG_TRANS)

#include "crypto.h"
#include "adv.h"
#include "mesh.h"
#include "lpn.h"
#include "friend.h"
#include "access.h"
#include "foundation.h"
#include "settings.h"
#include "transport.h"
#include "mesh_main.h"
#include "mesh_common.h"
#include "cfg_srv.h"

/* The transport layer needs at least three buffers for itself to avoid
 * deadlocks. Ensure that there are a sufficient number of advertising
 * buffers available compared to the maximum supported outgoing segment
 * count.
 */
_Static_assert(CONFIG_BLE_MESH_ADV_BUF_COUNT >= (CONFIG_BLE_MESH_TX_SEG_MAX + 3),
               "Too small BLE Mesh adv buffer count");

#define AID_MASK                    ((u8_t)(BIT_MASK(6)))

#define SEG(data)                   ((data)[0] >> 7)
#define AKF(data)                   (((data)[0] >> 6) & 0x01)
#define AID(data)                   ((data)[0] & AID_MASK)
#define ASZMIC(data)                (((data)[1] >> 7) & 1)

#define APP_MIC_LEN(aszmic)         ((aszmic) ? BLE_MESH_MIC_LONG : BLE_MESH_MIC_SHORT)

#define UNSEG_HDR(akf, aid)         ((akf << 6) | (aid & AID_MASK))
#define SEG_HDR(akf, aid)           (UNSEG_HDR(akf, aid) | 0x80)

#define BLOCK_COMPLETE(seg_n)       (u32_t)(((u64_t)1 << (seg_n + 1)) - 1)

#define SEQ_AUTH(iv_index, seq)     (((u64_t)iv_index) << 24 | (u64_t)seq)

/* Number of retransmit attempts (after the initial transmit) per segment */
#define SEG_RETRANSMIT_ATTEMPTS     4

/* "This timer shall be set to a minimum of 200 + 50 * TTL milliseconds.".
 * We use 400 since 300 is a common send duration for standard HCI, and we
 * need to have a timeout that's bigger than that.
 */
#define SEG_RETRANSMIT_TIMEOUT_UNICAST(tx)  (K_MSEC(400) + 50 * (tx)->ttl)
/* When sending to a group, the messages are not acknowledged, and there's no
 * reason to delay the repetitions significantly. Delaying by more than 0 ms
 * to avoid flooding the network.
 */
#define SEG_RETRANSMIT_TIMEOUT_GROUP        K_MSEC(50)

#define SEG_RETRANSMIT_TIMEOUT(tx)                  \
            (BLE_MESH_ADDR_IS_UNICAST((tx)->dst) ?  \
            SEG_RETRANSMIT_TIMEOUT_UNICAST(tx) :    \
            SEG_RETRANSMIT_TIMEOUT_GROUP)

/* How long to wait for available buffers before giving up */
#define BUF_TIMEOUT                 K_NO_WAIT

static struct seg_tx {
    struct bt_mesh_subnet   *sub;
    struct net_buf          *seg[CONFIG_BLE_MESH_TX_SEG_MAX];
    u64_t                    seq_auth;
    u16_t                    dst;
    u8_t                     seg_n:5,       /* Last segment index */
                             new_key:1;     /* New/old key */
    u8_t                     nack_count;    /* Number of unacked segs */
    u8_t                     ttl;
    u8_t                     seg_pending;   /* Number of segments pending */
    u8_t                     attempts;      /* Transmit attempts */
    const struct bt_mesh_send_cb *cb;
    void                    *cb_data;
    struct k_delayed_work    retransmit;    /* Retransmit timer */
} seg_tx[CONFIG_BLE_MESH_TX_SEG_MSG_COUNT];

static struct seg_rx {
    struct bt_mesh_subnet   *sub;
    u64_t                    seq_auth;
    u8_t                     seg_n: 5,
                             ctl: 1,
                             in_use: 1,
                             obo: 1;
    u8_t                     hdr;
    u8_t                     ttl;
    u16_t                    src;
    u16_t                    dst;
    u32_t                    block;
    u32_t                    last;
    struct k_delayed_work    ack;
    struct net_buf_simple    buf;
} seg_rx[CONFIG_BLE_MESH_RX_SEG_MSG_COUNT] = {
    [0 ... (CONFIG_BLE_MESH_RX_SEG_MSG_COUNT - 1)] = {
        .buf.size = CONFIG_BLE_MESH_RX_SDU_MAX,
    },
};

static u8_t seg_rx_buf_data[(CONFIG_BLE_MESH_RX_SEG_MSG_COUNT *
                             CONFIG_BLE_MESH_RX_SDU_MAX)];

static u16_t hb_sub_dst = BLE_MESH_ADDR_UNASSIGNED;

static bt_mesh_mutex_t tx_seg_lock;
static bt_mesh_mutex_t rx_seg_lock;

static void bt_mesh_tx_seg_mutex_new(void)
{
    if (!tx_seg_lock.mutex) {
        bt_mesh_mutex_create(&tx_seg_lock);
    }
}

static void bt_mesh_tx_seg_mutex_free(void)
{
    bt_mesh_mutex_free(&tx_seg_lock);
}

static void bt_mesh_tx_seg_lock(void)
{
    bt_mesh_mutex_lock(&tx_seg_lock);
}

static void bt_mesh_tx_seg_unlock(void)
{
    bt_mesh_mutex_unlock(&tx_seg_lock);
}

static void bt_mesh_rx_seg_mutex_new(void)
{
    if (!rx_seg_lock.mutex) {
        bt_mesh_mutex_create(&rx_seg_lock);
    }
}

static void bt_mesh_rx_seg_mutex_free(void)
{
    bt_mesh_mutex_free(&rx_seg_lock);
}

static void bt_mesh_rx_seg_lock(void)
{
    bt_mesh_mutex_lock(&rx_seg_lock);
}

static void bt_mesh_rx_seg_unlock(void)
{
    bt_mesh_mutex_unlock(&rx_seg_lock);
}

u8_t bt_mesh_get_seg_retrans_num(void)
{
    return SEG_RETRANSMIT_ATTEMPTS;
}

s32_t bt_mesh_get_seg_retrans_timeout(u8_t ttl)
{
    /* This function will be used when a client model sending an
     * acknowledged message. And if the dst of a message is not
     * a unicast address, the function will not be invoked.
     * So we can directly use the SEG_RETRANSMIT_TIMEOUT_UNICAST
     * macro here.
     */
    struct seg_tx tx = {
        .ttl = ttl,
    };
    return SEG_RETRANSMIT_TIMEOUT_UNICAST(&tx);
}

void bt_mesh_set_hb_sub_dst(u16_t addr)
{
    hb_sub_dst = addr;
}

static int send_unseg(struct bt_mesh_net_tx *tx, struct net_buf_simple *sdu,
                      const struct bt_mesh_send_cb *cb, void *cb_data)
{
    struct net_buf *buf = NULL;

    BT_DBG("src 0x%04x dst 0x%04x app_idx 0x%04x sdu_len %u",
           tx->src, tx->ctx->addr, tx->ctx->app_idx, sdu->len);

    buf = bt_mesh_adv_create(BLE_MESH_ADV_DATA, tx->xmit, BUF_TIMEOUT);
    if (!buf) {
        BT_ERR("%s, Out of network buffers", __func__);
        return -ENOBUFS;
    }

    net_buf_reserve(buf, BLE_MESH_NET_HDR_LEN);

    if (tx->ctx->app_idx == BLE_MESH_KEY_DEV) {
        net_buf_add_u8(buf, UNSEG_HDR(0, 0));
    } else {
        net_buf_add_u8(buf, UNSEG_HDR(1, tx->aid));
    }

    net_buf_add_mem(buf, sdu->data, sdu->len);

    if (IS_ENABLED(CONFIG_BLE_MESH_FRIEND)) {
        if (!bt_mesh_friend_queue_has_space(tx->sub->net_idx,
                                            tx->src, tx->ctx->addr,
                                            NULL, 1)) {
            if (BLE_MESH_ADDR_IS_UNICAST(tx->ctx->addr)) {
                BT_ERR("Not enough space in Friend Queue");
                net_buf_unref(buf);
                return -ENOBUFS;
            } else {
                BT_WARN("No space in Friend Queue");
                goto send;
            }
        }

        if (bt_mesh_friend_enqueue_tx(tx, BLE_MESH_FRIEND_PDU_SINGLE,
                                      NULL, 1, &buf->b) &&
                BLE_MESH_ADDR_IS_UNICAST(tx->ctx->addr)) {
            /* PDUs for a specific Friend should only go
             * out through the Friend Queue.
             */
            net_buf_unref(buf);
            send_cb_finalize(cb, cb_data);
            return 0;
        }
    }

send:
    return bt_mesh_net_send(tx, buf, cb, cb_data);
}

bool bt_mesh_tx_in_progress(void)
{
    int i;

    for (i = 0; i < ARRAY_SIZE(seg_tx); i++) {
        if (seg_tx[i].nack_count) {
            return true;
        }
    }

    return false;
}

static void seg_tx_done(struct seg_tx *tx, u8_t seg_idx)
{
    bt_mesh_adv_buf_ref_debug(__func__, tx->seg[seg_idx], 3U, BLE_MESH_BUF_REF_SMALL);

    BLE_MESH_ADV(tx->seg[seg_idx])->busy = 0U;
    net_buf_unref(tx->seg[seg_idx]);
    tx->seg[seg_idx] = NULL;
    tx->nack_count--;
}

static void seg_tx_reset(struct seg_tx *tx)
{
    int i;

    bt_mesh_tx_seg_lock();

    k_delayed_work_cancel(&tx->retransmit);

    tx->cb = NULL;
    tx->cb_data = NULL;
    tx->seq_auth = 0U;
    tx->sub = NULL;
    tx->dst = BLE_MESH_ADDR_UNASSIGNED;

    for (i = 0; i <= tx->seg_n && tx->nack_count; i++) {
        if (!tx->seg[i]) {
            continue;
        }

        seg_tx_done(tx, i);
    }

    tx->nack_count = 0U;

    bt_mesh_tx_seg_unlock();

    if (bt_mesh_atomic_test_and_clear_bit(bt_mesh.flags, BLE_MESH_IVU_PENDING)) {
        BT_DBG("Proceding with pending IV Update");
        /* bt_mesh_net_iv_update() will re-enable the flag if this
         * wasn't the only transfer.
         */
        if (bt_mesh_net_iv_update(bt_mesh.iv_index, false)) {
            bt_mesh_net_sec_update(NULL);
        }
    }
}

static inline void seg_tx_complete(struct seg_tx *tx, int err)
{
    const struct bt_mesh_send_cb *cb = tx->cb;
    void *cb_data = tx->cb_data;

    seg_tx_reset(tx);

    if (cb && cb->end) {
        cb->end(err, cb_data);
    }
}

static void schedule_retransmit(struct seg_tx *tx)
{
    if (--tx->seg_pending) {
        return;
    }

    if (!BLE_MESH_ADDR_IS_UNICAST(tx->dst) && !tx->attempts) {
        BT_INFO("Complete tx sdu to group");
        seg_tx_complete(tx, 0);
        return;
    }

    k_delayed_work_submit(&tx->retransmit, SEG_RETRANSMIT_TIMEOUT(tx));
}

static void seg_first_send_start(u16_t duration, int err, void *user_data)
{
    struct seg_tx *tx = user_data;

    if (tx->cb && tx->cb->start) {
        tx->cb->start(duration, err, tx->cb_data);
    }
}

static void seg_send_start(u16_t duration, int err, void *user_data)
{
    struct seg_tx *tx = user_data;

    /* If there's an error in transmitting the 'sent' callback will never
     * be called. Make sure that we kick the retransmit timer also in this
     * case since otherwise we risk the transmission of becoming stale.
     */
    if (err) {
        schedule_retransmit(tx);
    }
}

static void seg_sent(int err, void *user_data)
{
    struct seg_tx *tx = user_data;

    schedule_retransmit(tx);
}

static const struct bt_mesh_send_cb first_sent_cb = {
    .start = seg_first_send_start,
    .end = seg_sent,
};

static const struct bt_mesh_send_cb seg_sent_cb = {
    .start = seg_send_start,
    .end = seg_sent,
};

static void seg_tx_send_unacked(struct seg_tx *tx)
{
    int i, err = 0;

    bt_mesh_tx_seg_lock();

    if (!(tx->attempts--)) {
        BT_WARN("Ran out of retransmit attempts");
        bt_mesh_tx_seg_unlock();
        seg_tx_complete(tx, -ETIMEDOUT);
        return;
    }

    BT_INFO("Attempts: %u", tx->attempts);

    for (i = 0; i <= tx->seg_n; i++) {
        struct net_buf *seg = tx->seg[i];

        if (!seg) {
            continue;
        }

        if (BLE_MESH_ADV(seg)->busy) {
            BT_DBG("Skipping segment that's still advertising");
            continue;
        }

        tx->seg_pending++;

        BT_DBG("resending %u/%u", i, tx->seg_n);

        err = bt_mesh_net_resend(tx->sub, seg, tx->new_key,
                                 &seg_sent_cb, tx);
        if (err) {
            BT_ERR("%s, Sending segment failed", __func__);
            bt_mesh_tx_seg_unlock();
            seg_tx_complete(tx, -EIO);
            return;
        }
    }

    bt_mesh_tx_seg_unlock();
}

static void seg_retransmit(struct k_work *work)
{
    struct seg_tx *tx = CONTAINER_OF(work, struct seg_tx, retransmit);

    seg_tx_send_unacked(tx);
}

static int send_seg(struct bt_mesh_net_tx *net_tx, struct net_buf_simple *sdu,
                    const struct bt_mesh_send_cb *cb, void *cb_data)
{
    u8_t seg_hdr = 0U, seg_o = 0U;
    u16_t seq_zero = 0U;
    struct seg_tx *tx = NULL;
    int i;

    BT_DBG("src 0x%04x dst 0x%04x app_idx 0x%04x aszmic %u sdu_len %u",
           net_tx->src, net_tx->ctx->addr, net_tx->ctx->app_idx,
           net_tx->aszmic, sdu->len);

    if (sdu->len < 1) {
        BT_ERR("%s, Zero-length SDU not allowed", __func__);
        return -EINVAL;
    }

    if (sdu->len > BLE_MESH_TX_SDU_MAX) {
        BT_ERR("%s, Not enough segment buffers for length %u", __func__, sdu->len);
        return -EMSGSIZE;
    }

    for (tx = NULL, i = 0; i < ARRAY_SIZE(seg_tx); i++) {
        if (!seg_tx[i].nack_count) {
            tx = &seg_tx[i];
            break;
        }
    }

    if (!tx) {
        BT_ERR("%s, No multi-segment message contexts available", __func__);
        return -EBUSY;
    }

    if (net_tx->ctx->app_idx == BLE_MESH_KEY_DEV) {
        seg_hdr = SEG_HDR(0, 0);
    } else {
        seg_hdr = SEG_HDR(1, net_tx->aid);
    }

    seg_o = 0U;
    tx->dst = net_tx->ctx->addr;
    tx->seg_n = (sdu->len - 1) / BLE_MESH_APP_SEG_SDU_MAX;
    tx->nack_count = tx->seg_n + 1;
    tx->seq_auth = SEQ_AUTH(BLE_MESH_NET_IVI_TX, bt_mesh.seq);
    tx->sub = net_tx->sub;
    tx->new_key = net_tx->sub->kr_flag;
    tx->attempts = SEG_RETRANSMIT_ATTEMPTS;
    tx->seg_pending = 0;
    tx->cb = cb;
    tx->cb_data = cb_data;

    if (net_tx->ctx->send_ttl == BLE_MESH_TTL_DEFAULT) {
        tx->ttl = bt_mesh_default_ttl_get();
    } else {
        tx->ttl = net_tx->ctx->send_ttl;
    }

    seq_zero = tx->seq_auth & TRANS_SEQ_ZERO_MASK;

    BT_DBG("SeqZero 0x%04x", seq_zero);

    if (IS_ENABLED(CONFIG_BLE_MESH_FRIEND) &&
            !bt_mesh_friend_queue_has_space(tx->sub->net_idx, net_tx->src,
                                            tx->dst, &tx->seq_auth,
                                            tx->seg_n + 1) &&
            BLE_MESH_ADDR_IS_UNICAST(tx->dst)) {
        BT_ERR("Not enough space in Friend Queue for %u segments",
               tx->seg_n + 1);
        seg_tx_reset(tx);
        return -ENOBUFS;
    }

    for (seg_o = 0U; sdu->len; seg_o++) {
        struct net_buf *seg = NULL;
        u16_t len = 0U;
        int err = 0;

        seg = bt_mesh_adv_create(BLE_MESH_ADV_DATA, net_tx->xmit,
                                 BUF_TIMEOUT);
        if (!seg) {
            BT_ERR("%s, Out of segment buffers", __func__);
            seg_tx_reset(tx);
            return -ENOBUFS;
        }

        net_buf_reserve(seg, BLE_MESH_NET_HDR_LEN);

        net_buf_add_u8(seg, seg_hdr);
        net_buf_add_u8(seg, (net_tx->aszmic << 7) | seq_zero >> 6);
        net_buf_add_u8(seg, (((seq_zero & 0x3f) << 2) |
                             (seg_o >> 3)));
        net_buf_add_u8(seg, ((seg_o & 0x07) << 5) | tx->seg_n);

        len = MIN(sdu->len, BLE_MESH_APP_SEG_SDU_MAX);
        net_buf_add_mem(seg, sdu->data, len);
        net_buf_simple_pull(sdu, len);

        if (IS_ENABLED(CONFIG_BLE_MESH_FRIEND)) {
            enum bt_mesh_friend_pdu_type type = BLE_MESH_FRIEND_PDU_PARTIAL;

            if (seg_o == tx->seg_n) {
                type = BLE_MESH_FRIEND_PDU_COMPLETE;
            } else {
                type = BLE_MESH_FRIEND_PDU_PARTIAL;
            }

            if (bt_mesh_friend_enqueue_tx(net_tx, type,
                                          &tx->seq_auth,
                                          tx->seg_n + 1,
                                          &seg->b) &&
                    BLE_MESH_ADDR_IS_UNICAST(net_tx->ctx->addr)) {
                /* PDUs for a specific Friend should only go
                 * out through the Friend Queue.
                 */
                net_buf_unref(seg);
                continue;
            }
        }

        tx->seg[seg_o] = net_buf_ref(seg);

        BT_DBG("Sending %u/%u", seg_o, tx->seg_n);
        tx->seg_pending++;

        err = bt_mesh_net_send(net_tx, seg,
                               seg_o ? &seg_sent_cb : &first_sent_cb,
                               tx);
        if (err) {
            BT_ERR("%s, Sending segment failed", __func__);
            seg_tx_reset(tx);
            return err;
        }
    }

    /* This can happen if segments only went into the Friend Queue */
    if (IS_ENABLED(CONFIG_BLE_MESH_FRIEND) && !tx->seg[0]) {
        seg_tx_reset(tx);
        /* If there was a callback notify sending immediately since
         * there's no other way to track this (at least currently)
         * with the Friend Queue.
         */
        send_cb_finalize(cb, cb_data);
    }

    if (IS_ENABLED(CONFIG_BLE_MESH_LOW_POWER) &&
        bt_mesh_lpn_established()) {
        bt_mesh_lpn_poll();
    }

    return 0;
}

struct bt_mesh_app_key *bt_mesh_app_key_find(u16_t app_idx)
{
    int i;

    for (i = 0; i < ARRAY_SIZE(bt_mesh.app_keys); i++) {
        struct bt_mesh_app_key *key = &bt_mesh.app_keys[i];

        if (key->net_idx != BLE_MESH_KEY_UNUSED &&
                key->app_idx == app_idx) {
            return key;
        }
    }

    return NULL;
}

int bt_mesh_trans_send(struct bt_mesh_net_tx *tx, struct net_buf_simple *msg,
                       const struct bt_mesh_send_cb *cb, void *cb_data)
{
    const u8_t *key = NULL;
    u8_t *ad = NULL, role = 0U;
    u8_t aid = 0U;
    int err = 0;

    if (net_buf_simple_tailroom(msg) < BLE_MESH_MIC_SHORT) {
        BT_ERR("%s, Insufficient tailroom for Transport MIC", __func__);
        return -EINVAL;
    }

    if (msg->len > BLE_MESH_SDU_UNSEG_MAX) {
        tx->ctx->send_rel = 1U;
    }

    BT_DBG("net_idx 0x%04x app_idx 0x%04x dst 0x%04x", tx->sub->net_idx,
           tx->ctx->app_idx, tx->ctx->addr);
    BT_DBG("len %u: %s", msg->len, bt_hex(msg->data, msg->len));

    role = bt_mesh_get_device_role(tx->ctx->model, tx->ctx->srv_send);
    if (role == ROLE_NVAL) {
        BT_ERR("%s, Failed to get model role", __func__);
        return -EINVAL;
    }

    err = bt_mesh_app_key_get(tx->sub, tx->ctx->app_idx, &key,
                              &aid, role, tx->ctx->addr);
    if (err) {
        return err;
    }

    tx->aid = aid;

    if (!tx->ctx->send_rel || net_buf_simple_tailroom(msg) < BLE_MESH_MIC_LONG) {
        tx->aszmic = 0U;
    } else {
        tx->aszmic = 1U;
    }

    if (BLE_MESH_ADDR_IS_VIRTUAL(tx->ctx->addr)) {
        ad = bt_mesh_label_uuid_get(tx->ctx->addr);
    } else {
        ad = NULL;
    }

    err = bt_mesh_app_encrypt(key, tx->ctx->app_idx == BLE_MESH_KEY_DEV,
                              tx->aszmic, msg, ad, tx->src,
                              tx->ctx->addr, bt_mesh.seq,
                              BLE_MESH_NET_IVI_TX);
    if (err) {
        BT_ERR("%s, Encrypt failed", __func__);
        return err;
    }

    if (tx->ctx->send_rel) {
        err = send_seg(tx, msg, cb, cb_data);
    } else {
        err = send_unseg(tx, msg, cb, cb_data);
    }

    return err;
}

static void update_rpl(struct bt_mesh_rpl *rpl, struct bt_mesh_net_rx *rx)
{
    rpl->src = rx->ctx.addr;
    rpl->seq = rx->seq;
    rpl->old_iv = rx->old_iv;

    if (IS_ENABLED(CONFIG_BLE_MESH_SETTINGS)) {
        bt_mesh_store_rpl(rpl);
    }
}

/* Check the Replay Protection List for a replay attempt. If non-NULL match
 * parameter is given the RPL slot is returned but it is not immediately
 * updated (needed for segmented messages), whereas if a NULL match is given
 * the RPL is immediately updated (used for unsegmented messages).
 */
static bool is_replay(struct bt_mesh_net_rx *rx, struct bt_mesh_rpl **match)
{
    int i;

    /* Don't bother checking messages from ourselves */
    if (rx->net_if == BLE_MESH_NET_IF_LOCAL) {
        return false;
    }

    /* The RPL is used only for the local node */
    if (!rx->local_match) {
        return false;
    }

    for (i = 0; i < ARRAY_SIZE(bt_mesh.rpl); i++) {
        struct bt_mesh_rpl *rpl = &bt_mesh.rpl[i];

        /* Empty slot */
        if (!rpl->src) {
            if (match) {
                *match = rpl;
            } else {
                update_rpl(rpl, rx);
            }

            return false;
        }

        /* Existing slot for given address */
        if (rpl->src == rx->ctx.addr) {
            if (rx->old_iv && !rpl->old_iv) {
                return true;
            }

            if ((!rx->old_iv && rpl->old_iv) ||
                    rpl->seq < rx->seq) {
                if (match) {
                    *match = rpl;
                } else {
                    update_rpl(rpl, rx);
                }

                return false;
            } else {
                return true;
            }
        }
    }

    BT_ERR("%s, RPL is full!", __func__);
    return true;
}

static int sdu_recv(struct bt_mesh_net_rx *rx, u32_t seq, u8_t hdr,
                    u8_t aszmic, struct net_buf_simple *buf)
{
    struct net_buf_simple *sdu = NULL;
    size_t array_size = 0U;
    size_t i = 0U;
    u8_t *ad = NULL;
    int err = 0;

    BT_DBG("ASZMIC %u AKF %u AID 0x%02x", aszmic, AKF(&hdr), AID(&hdr));
    BT_DBG("len %u: %s", buf->len, bt_hex(buf->data, buf->len));

    if (buf->len < 1 + APP_MIC_LEN(aszmic)) {
        BT_ERR("%s, Too short SDU + MIC", __func__);
        return -EINVAL;
    }

    if (IS_ENABLED(CONFIG_BLE_MESH_FRIEND) && !rx->local_match) {
        BT_DBG("Ignoring PDU for LPN 0x%04x of this Friend",
               rx->ctx.recv_dst);
        return 0;
    }

    if (BLE_MESH_ADDR_IS_VIRTUAL(rx->ctx.recv_dst)) {
        ad = bt_mesh_label_uuid_get(rx->ctx.recv_dst);
    } else {
        ad = NULL;
    }

    /* Adjust the length to not contain the MIC at the end */
    buf->len -= APP_MIC_LEN(aszmic);

    /* Use bt_mesh_alloc_buf() instead of NET_BUF_SIMPLE_DEFINE to avoid
     * causing btu task stackoverflow.
     */
    sdu = bt_mesh_alloc_buf(CONFIG_BLE_MESH_RX_SDU_MAX - BLE_MESH_MIC_SHORT);
    if (!sdu) {
        BT_ERR("%s, Failed to allocate memory", __func__);
        return -ENOMEM;
    }

    if (!AKF(&hdr)) {
        array_size = bt_mesh_rx_devkey_size();

        for (i = 0U; i < array_size; i++) {
            const u8_t *dev_key = NULL;

            dev_key = bt_mesh_rx_devkey_get(i, rx->ctx.addr);
            if (!dev_key) {
                BT_DBG("%s, NULL Device Key", __func__);
                continue;
            }

            net_buf_simple_reset(sdu);
            err = bt_mesh_app_decrypt(dev_key, true, aszmic, buf,
                                      sdu, ad, rx->ctx.addr,
                                      rx->ctx.recv_dst, seq,
                                      BLE_MESH_NET_IVI_RX(rx));
            if (err) {
                continue;
            }

            rx->ctx.app_idx = BLE_MESH_KEY_DEV;
            bt_mesh_model_recv(rx, sdu);

            bt_mesh_free_buf(sdu);
            return 0;
        }

        BT_WARN("%s, Unable to decrypt with DevKey", __func__);
        bt_mesh_free_buf(sdu);
        return -ENODEV;
    }

    array_size = bt_mesh_rx_appkey_size();

    for (i = 0U; i < array_size; i++) {
        struct bt_mesh_app_keys *keys = NULL;
        struct bt_mesh_app_key *key = NULL;

        key = bt_mesh_rx_appkey_get(i);
        if (!key) {
            BT_DBG("%s, NULL AppKey", __func__);
            continue;
        }

        /* Make sure that this AppKey matches received net_idx */
        if (key->net_idx != rx->sub->net_idx) {
            continue;
        }

        if (rx->new_key && key->updated) {
            keys = &key->keys[1];
        } else {
            keys = &key->keys[0];
        }

        /* Check that the AppKey ID matches */
        if (AID(&hdr) != keys->id) {
            continue;
        }

        net_buf_simple_reset(sdu);
        err = bt_mesh_app_decrypt(keys->val, false, aszmic, buf,
                                  sdu, ad, rx->ctx.addr,
                                  rx->ctx.recv_dst, seq,
                                  BLE_MESH_NET_IVI_RX(rx));
        if (err) {
            BT_DBG("Unable to decrypt with AppKey 0x%03x",
                   key->app_idx);
            continue;
        }

        rx->ctx.app_idx = key->app_idx;
        bt_mesh_model_recv(rx, sdu);

        bt_mesh_free_buf(sdu);
        return 0;
    }

    if (rx->local_match) {
        BT_WARN("%s, No matching AppKey", __func__);
    }
    bt_mesh_free_buf(sdu);
    return 0;
}

static struct seg_tx *seg_tx_lookup(u16_t seq_zero, u8_t obo, u16_t addr)
{
    struct seg_tx *tx = NULL;
    int i;

    for (i = 0; i < ARRAY_SIZE(seg_tx); i++) {
        tx = &seg_tx[i];

        if ((tx->seq_auth & TRANS_SEQ_ZERO_MASK) != seq_zero) {
            continue;
        }

        if (tx->dst == addr) {
            return tx;
        }

        /* If the expected remote address doesn't match,
         * but the OBO flag is set and this is the first
         * acknowledgement, assume it's a Friend that's
         * responding and therefore accept the message.
         */
        if (obo && tx->nack_count == tx->seg_n + 1) {
            tx->dst = addr;
            return tx;
        }
    }

    return NULL;
}

static int trans_ack(struct bt_mesh_net_rx *rx, u8_t hdr,
                     struct net_buf_simple *buf, u64_t *seq_auth)
{
    struct seg_tx *tx = NULL;
    unsigned int bit = 0;
    u32_t ack = 0U;
    u16_t seq_zero = 0U;
    u8_t obo = 0U;

    if (buf->len < 6) {
        BT_ERR("%s, Too short ack message", __func__);
        return -EINVAL;
    }

    seq_zero = net_buf_simple_pull_be16(buf);
    obo = seq_zero >> 15;
    seq_zero = (seq_zero >> 2) & TRANS_SEQ_ZERO_MASK;

    if (IS_ENABLED(CONFIG_BLE_MESH_FRIEND) && rx->friend_match) {
        BT_DBG("Ack for LPN 0x%04x of this Friend", rx->ctx.recv_dst);
        /* Best effort - we don't have enough info for true SeqAuth */
        *seq_auth = SEQ_AUTH(BLE_MESH_NET_IVI_RX(rx), seq_zero);
        return 0;
    }

    ack = net_buf_simple_pull_be32(buf);

    BT_DBG("OBO %u seq_zero 0x%04x ack 0x%08x", obo, seq_zero, ack);

    tx = seg_tx_lookup(seq_zero, obo, rx->ctx.addr);
    if (!tx) {
        BT_WARN("No matching TX context for ack");
        return -EINVAL;
    }

    if (!BLE_MESH_ADDR_IS_UNICAST(tx->dst)) {
        BT_WARN("%s, Received ack for segments to group", __func__);
        return -EINVAL;
    }

    *seq_auth = tx->seq_auth;

    if (!ack) {
        BT_WARN("SDU canceled");
        seg_tx_complete(tx, -ECANCELED);
        return 0;
    }

    if (find_msb_set(ack) - 1 > tx->seg_n) {
        BT_ERR("%s, Too large segment number in ack", __func__);
        return -EINVAL;
    }

    k_delayed_work_cancel(&tx->retransmit);

    while ((bit = find_lsb_set(ack))) {
        if (tx->seg[bit - 1]) {
            BT_DBG("seg %u/%u acked", bit - 1, tx->seg_n);
            bt_mesh_tx_seg_lock();
            seg_tx_done(tx, bit - 1);
            bt_mesh_tx_seg_unlock();
        }

        ack &= ~BIT(bit - 1);
    }

    if (tx->nack_count) {
        seg_tx_send_unacked(tx);
    } else {
        BT_DBG("SDU TX complete");
        seg_tx_complete(tx, 0);
    }

    return 0;
}

static int trans_heartbeat(struct bt_mesh_net_rx *rx,
                           struct net_buf_simple *buf)
{
    u8_t init_ttl = 0U, hops = 0U;
    u16_t feat = 0U;

    if (buf->len < 3) {
        BT_ERR("%s, Too short heartbeat message", __func__);
        return -EINVAL;
    }

    if (rx->ctx.recv_dst != hb_sub_dst) {
        BT_WARN("Ignoring heartbeat to non-subscribed destination");
        return 0;
    }

    init_ttl = (net_buf_simple_pull_u8(buf) & 0x7f);
    feat = net_buf_simple_pull_be16(buf);

    hops = (init_ttl - rx->ctx.recv_ttl + 1);

    BT_INFO("src 0x%04x TTL %u InitTTL %u (%u hop%s) feat 0x%04x",
           rx->ctx.addr, rx->ctx.recv_ttl, init_ttl, hops,
           (hops == 1U) ? "" : "s", feat);

    bt_mesh_heartbeat(rx->ctx.addr, rx->ctx.recv_dst, hops, feat);

    return 0;
}

static int ctl_recv(struct bt_mesh_net_rx *rx, u8_t hdr,
                    struct net_buf_simple *buf, u64_t *seq_auth)
{
    u8_t ctl_op = TRANS_CTL_OP(&hdr);

    BT_DBG("OpCode 0x%02x len %u", ctl_op, buf->len);

    switch (ctl_op) {
    case TRANS_CTL_OP_ACK:
        return trans_ack(rx, hdr, buf, seq_auth);
    case TRANS_CTL_OP_HEARTBEAT:
        return trans_heartbeat(rx, buf);
    }

    /* Only acks and heartbeats may need processing without local_match */
    if (!rx->local_match) {
        return 0;
    }

    if (IS_ENABLED(CONFIG_BLE_MESH_FRIEND) && !bt_mesh_lpn_established()) {
        switch (ctl_op) {
        case TRANS_CTL_OP_FRIEND_POLL:
            return bt_mesh_friend_poll(rx, buf);
        case TRANS_CTL_OP_FRIEND_REQ:
            return bt_mesh_friend_req(rx, buf);
        case TRANS_CTL_OP_FRIEND_CLEAR:
            return bt_mesh_friend_clear(rx, buf);
        case TRANS_CTL_OP_FRIEND_CLEAR_CFM:
            return bt_mesh_friend_clear_cfm(rx, buf);
        case TRANS_CTL_OP_FRIEND_SUB_ADD:
            return bt_mesh_friend_sub_add(rx, buf);
        case TRANS_CTL_OP_FRIEND_SUB_REM:
            return bt_mesh_friend_sub_rem(rx, buf);
        }
    }

#if defined(CONFIG_BLE_MESH_LOW_POWER)
    if (ctl_op == TRANS_CTL_OP_FRIEND_OFFER) {
        return bt_mesh_lpn_friend_offer(rx, buf);
    }

    if (rx->ctx.addr == bt_mesh.lpn.frnd) {
        if (ctl_op == TRANS_CTL_OP_FRIEND_CLEAR_CFM) {
            return bt_mesh_lpn_friend_clear_cfm(rx, buf);
        }

        if (!rx->friend_cred) {
            BT_WARN("Message from friend with wrong credentials");
            return -EINVAL;
        }

        switch (ctl_op) {
        case TRANS_CTL_OP_FRIEND_UPDATE:
            return bt_mesh_lpn_friend_update(rx, buf);
        case TRANS_CTL_OP_FRIEND_SUB_CFM:
            return bt_mesh_lpn_friend_sub_cfm(rx, buf);
        }
    }
#endif /* CONFIG_BLE_MESH_LOW_POWER */

    BT_WARN("Unhandled TransOpCode 0x%02x", ctl_op);

    return -ENOENT;
}

static int trans_unseg(struct net_buf_simple *buf, struct bt_mesh_net_rx *rx,
                       u64_t *seq_auth)
{
    u8_t hdr = 0U;

    BT_DBG("AFK %u AID 0x%02x", AKF(buf->data), AID(buf->data));

    if (buf->len < 1) {
        BT_ERR("%s, Too small unsegmented PDU", __func__);
        return -EINVAL;
    }

    if (is_replay(rx, NULL)) {
        BT_WARN("Replay: src 0x%04x dst 0x%04x seq 0x%06x",
                rx->ctx.addr, rx->ctx.recv_dst, rx->seq);
        return -EINVAL;
    }

    hdr = net_buf_simple_pull_u8(buf);

    if (rx->ctl) {
        return ctl_recv(rx, hdr, buf, seq_auth);
    } else {
        /* SDUs must match a local element or an LPN of this Friend. */
        if (!rx->local_match && !rx->friend_match) {
            return 0;
        }

        return sdu_recv(rx, rx->seq, hdr, 0, buf);
    }
}

static inline s32_t ack_timeout(struct seg_rx *rx)
{
    s32_t to = 0;
    u8_t ttl = 0U;

    if (rx->ttl == BLE_MESH_TTL_DEFAULT) {
        ttl = bt_mesh_default_ttl_get();
    } else {
        ttl = rx->ttl;
    }

    /* The acknowledgment timer shall be set to a minimum of
     * 150 + 50 * TTL milliseconds.
     */
    to = K_MSEC(150 + (ttl * 50U));

    /* 100 ms for every not yet received segment */
    to += K_MSEC(((rx->seg_n + 1) - popcount(rx->block)) * 100U);

    /* Make sure we don't send more frequently than the duration for
     * each packet (default is 300ms).
     */
    return MAX(to, K_MSEC(400));
}

static int ctl_send_unseg(struct bt_mesh_net_tx *tx, u8_t ctl_op, void *data,
                          size_t data_len, const struct bt_mesh_send_cb *cb,
                          void *cb_data)
{
    struct net_buf *buf = NULL;

    buf = bt_mesh_adv_create(BLE_MESH_ADV_DATA, tx->xmit, BUF_TIMEOUT);
    if (!buf) {
        BT_ERR("%s, Out of transport buffers", __func__);
        return -ENOBUFS;
    }

    net_buf_reserve(buf, BLE_MESH_NET_HDR_LEN);

    net_buf_add_u8(buf, TRANS_CTL_HDR(ctl_op, 0));

    net_buf_add_mem(buf, data, data_len);

    if (IS_ENABLED(CONFIG_BLE_MESH_FRIEND)) {
        if (bt_mesh_friend_enqueue_tx(tx, BLE_MESH_FRIEND_PDU_SINGLE,
                                      NULL, 1, &buf->b) &&
                BLE_MESH_ADDR_IS_UNICAST(tx->ctx->addr)) {
            /* PDUs for a specific Friend should only go
             * out through the Friend Queue.
             */
            net_buf_unref(buf);
            return 0;
        }
    }

    return bt_mesh_net_send(tx, buf, cb, cb_data);
}

static int ctl_send_seg(struct bt_mesh_net_tx *tx, u8_t ctl_op, void *data,
                        size_t data_len, const struct bt_mesh_send_cb *cb,
                        void *cb_data)
{
    struct seg_tx *tx_seg = NULL;
    u16_t unsent = data_len;
    u16_t seq_zero = 0;
    u8_t seg_o = 0;
    int i;

    for (tx_seg = NULL, i = 0; i < ARRAY_SIZE(seg_tx); i++) {
        if (!seg_tx[i].nack_count) {
            tx_seg = &seg_tx[i];
            break;
        }
    }

    if (!tx_seg) {
        BT_ERR("%s, No multi-segment message contexts available", __func__);
        return -EBUSY;
    }

    tx_seg->dst = tx->ctx->addr;
    tx_seg->seg_n = (data_len - 1) / BLE_MESH_CTL_SEG_SDU_MAX;
    tx_seg->nack_count = tx_seg->seg_n + 1;
    tx_seg->seq_auth = SEQ_AUTH(BLE_MESH_NET_IVI_TX, bt_mesh.seq);
    tx_seg->sub = tx->sub;
    tx_seg->new_key = tx->sub->kr_flag;
    tx_seg->attempts = SEG_RETRANSMIT_ATTEMPTS;
    tx_seg->seg_pending = 0;
    tx_seg->cb = cb;
    tx_seg->cb_data = cb_data;

    if (tx->ctx->send_ttl == BLE_MESH_TTL_DEFAULT) {
        tx_seg->ttl = bt_mesh_default_ttl_get();
    } else {
        tx_seg->ttl = tx->ctx->send_ttl;
    }

    seq_zero = tx_seg->seq_auth & TRANS_SEQ_ZERO_MASK;

    BT_DBG("SeqZero 0x%04x", seq_zero);

    for (seg_o = 0; seg_o <= tx_seg->seg_n; seg_o++) {
        struct net_buf *seg = NULL;
        u16_t len = 0;
        int err = 0;

        seg = bt_mesh_adv_create(BLE_MESH_ADV_DATA, tx->xmit,
                                 BUF_TIMEOUT);
        if (!seg) {
            BT_ERR("%s, Out of segment buffers", __func__);
            seg_tx_reset(tx_seg);
            return -ENOBUFS;
        }

        net_buf_reserve(seg, BLE_MESH_NET_HDR_LEN);

        net_buf_add_u8(seg, TRANS_CTL_HDR(ctl_op, 1));
        net_buf_add_u8(seg, (tx->aszmic << 7) | seq_zero >> 6);
        net_buf_add_u8(seg, (((seq_zero & 0x3f) << 2) | (seg_o >> 3)));
        net_buf_add_u8(seg, ((seg_o & 0x07) << 5) | tx_seg->seg_n);

        len = MIN(unsent, BLE_MESH_CTL_SEG_SDU_MAX);
        net_buf_add_mem(seg, (u8_t *)data + (data_len - unsent), len);
        unsent -= len;

        tx_seg->seg[seg_o] = net_buf_ref(seg);

        BT_DBG("Sending %u/%u", seg_o, tx_seg->seg_n);
        tx_seg->seg_pending++;

        err = bt_mesh_net_send(tx, seg,
                               seg_o ? &seg_sent_cb : &first_sent_cb,
                               tx_seg);
        if (err) {
            BT_ERR("%s, Sending segment failed", __func__);
            seg_tx_reset(tx_seg);
            return err;
        }
    }

    return 0;
}

int bt_mesh_ctl_send(struct bt_mesh_net_tx *tx, u8_t ctl_op, void *data,
                     size_t data_len, const struct bt_mesh_send_cb *cb,
                     void *cb_data)
{
    BT_DBG("src 0x%04x dst 0x%04x ttl 0x%02x ctl 0x%02x", tx->src,
            tx->ctx->addr, tx->ctx->send_ttl, ctl_op);
    BT_DBG("len %zu: %s", data_len, bt_hex(data, data_len));

    if (data_len <= BLE_MESH_SDU_UNSEG_MAX) {
        return ctl_send_unseg(tx, ctl_op, data, data_len,
                              cb, cb_data);
    } else {
        return ctl_send_seg(tx, ctl_op, data, data_len,
                            cb, cb_data);
    }
}

static int send_ack(struct bt_mesh_subnet *sub, u16_t src, u16_t dst,
                    u8_t ttl, u64_t *seq_auth, u32_t block, u8_t obo)
{
    struct bt_mesh_msg_ctx ctx = {
        .net_idx = sub->net_idx,
        .app_idx = BLE_MESH_KEY_UNUSED,
        .addr = dst,
        .send_ttl = ttl,
    };
    struct bt_mesh_net_tx tx = {
        .sub = sub,
        .ctx = &ctx,
        .src = obo ? bt_mesh_primary_addr() : src,
        .xmit = bt_mesh_net_transmit_get(),
    };
    u16_t seq_zero = *seq_auth & TRANS_SEQ_ZERO_MASK;
    u8_t buf[6] = {0};

    BT_DBG("SeqZero 0x%04x Block 0x%08x OBO %u", seq_zero, block, obo);

    if (bt_mesh_lpn_established()) {
        BT_WARN("Not sending ack when LPN is enabled");
        return 0;
    }

    /* This can happen if the segmented message was destined for a group
     * or virtual address.
     */
    if (!BLE_MESH_ADDR_IS_UNICAST(src)) {
        BT_INFO("Not sending ack for non-unicast address");
        return 0;
    }

    sys_put_be16(((seq_zero << 2) & 0x7ffc) | (obo << 15), buf);
    sys_put_be32(block, &buf[2]);

    return bt_mesh_ctl_send(&tx, TRANS_CTL_OP_ACK, buf, sizeof(buf),
                            NULL, NULL);
}

static void seg_rx_reset(struct seg_rx *rx, bool full_reset)
{
    BT_DBG("rx %p", rx);

    bt_mesh_rx_seg_lock();

    k_delayed_work_cancel(&rx->ack);

    if (IS_ENABLED(CONFIG_BLE_MESH_FRIEND) && rx->obo &&
            rx->block != BLOCK_COMPLETE(rx->seg_n)) {
        BT_WARN("Clearing incomplete buffers from Friend queue");
        bt_mesh_friend_clear_incomplete(rx->sub, rx->src, rx->dst,
                                        &rx->seq_auth);
    }

    rx->in_use = 0U;

    /* We don't always reset these values since we need to be able to
     * send an ack if we receive a segment after we've already received
     * the full SDU.
     */
    if (full_reset) {
        rx->seq_auth = 0U;
        rx->sub = NULL;
        rx->src = BLE_MESH_ADDR_UNASSIGNED;
        rx->dst = BLE_MESH_ADDR_UNASSIGNED;
    }

    bt_mesh_rx_seg_unlock();
}

static u32_t incomplete_timeout(struct seg_rx *rx)
{
    u32_t timeout = 0U;
    u8_t ttl = 0U;

    if (rx->ttl == BLE_MESH_TTL_DEFAULT) {
        ttl = bt_mesh_default_ttl_get();
    } else {
        ttl = rx->ttl;
    }

    /* "The incomplete timer shall be set to a minimum of 10 seconds." */
    timeout = K_SECONDS(10);

    /* The less segments being received, the shorter timeout will be used. */
    timeout += K_MSEC(ttl * popcount(rx->block) * 100U);

    return MIN(timeout, K_SECONDS(60));
}

static void seg_ack(struct k_work *work)
{
    struct seg_rx *rx = CONTAINER_OF(work, struct seg_rx, ack);

    BT_DBG("rx %p", rx);

    bt_mesh_rx_seg_lock();

    if (k_uptime_get_32() - rx->last > incomplete_timeout(rx)) {
        BT_WARN("Incomplete timer expired");
        bt_mesh_rx_seg_unlock();
        seg_rx_reset(rx, false);
        return;
    }

    /* Add this check in case the timeout handler is just executed
     * after the seg_rx_reset() which may reset rx->sub to NULL.
     */
    if (rx->sub == NULL) {
        bt_mesh_rx_seg_unlock();
        return;
    }

    send_ack(rx->sub, rx->dst, rx->src, rx->ttl, &rx->seq_auth,
             rx->block, rx->obo);

    k_delayed_work_submit(&rx->ack, ack_timeout(rx));

    bt_mesh_rx_seg_unlock();
}

static inline u8_t seg_len(bool ctl)
{
    if (ctl) {
        return BLE_MESH_CTL_SEG_SDU_MAX;
    } else {
        return BLE_MESH_APP_SEG_SDU_MAX;
    }
}

static inline bool sdu_len_is_ok(bool ctl, u8_t seg_n)
{
    return ((seg_n * seg_len(ctl) + 1) <= CONFIG_BLE_MESH_RX_SDU_MAX);
}

static struct seg_rx *seg_rx_find(struct bt_mesh_net_rx *net_rx,
                                  const u64_t *seq_auth)
{
    int i;

    for (i = 0; i < ARRAY_SIZE(seg_rx); i++) {
        struct seg_rx *rx = &seg_rx[i];

        if (rx->src != net_rx->ctx.addr ||
                rx->dst != net_rx->ctx.recv_dst) {
            continue;
        }

        /* Return newer RX context in addition to an exact match, so
         * the calling function can properly discard an old SeqAuth.
         * Note: in Zephyr v1.14.0, ">=" is used here which does not
         * seem to be a right operation, hence we still use the original
         * "==" here.
         */
        if (rx->seq_auth == *seq_auth) {
            return rx;
        }

        if (rx->in_use) {
            BT_WARN("Duplicate SDU from src 0x%04x",
                    net_rx->ctx.addr);

            /* Clear out the old context since the sender
             * has apparently started sending a new SDU.
             */
            seg_rx_reset(rx, true);

            /* Return non-match so caller can re-allocate */
            return NULL;
        }
    }

    return NULL;
}

static bool seg_rx_is_valid(struct seg_rx *rx, struct bt_mesh_net_rx *net_rx,
                            const u8_t *hdr, u8_t seg_n)
{
    if (rx->hdr != *hdr || rx->seg_n != seg_n) {
        BT_ERR("%s, Invalid segment for ongoing session", __func__);
        return false;
    }

    if (rx->src != net_rx->ctx.addr || rx->dst != net_rx->ctx.recv_dst) {
        BT_ERR("%s, Invalid source or destination for segment", __func__);
        return false;
    }

    if (rx->ctl != net_rx->ctl) {
        BT_ERR("%s, Inconsistent CTL in segment", __func__);
        return false;
    }

    return true;
}

static struct seg_rx *seg_rx_alloc(struct bt_mesh_net_rx *net_rx,
                                   const u8_t *hdr, const u64_t *seq_auth,
                                   u8_t seg_n)
{
    int i;

    for (i = 0; i < ARRAY_SIZE(seg_rx); i++) {
        struct seg_rx *rx = &seg_rx[i];

        if (rx->in_use) {
            continue;
        }

        rx->in_use = 1U;
        net_buf_simple_reset(&rx->buf);
        rx->sub = net_rx->sub;
        rx->ctl = net_rx->ctl;
        rx->seq_auth = *seq_auth;
        rx->seg_n = seg_n;
        rx->hdr = *hdr;
        rx->ttl = net_rx->ctx.send_ttl;
        rx->src = net_rx->ctx.addr;
        rx->dst = net_rx->ctx.recv_dst;
        rx->block = 0U;

        BT_DBG("New RX context. Block Complete 0x%08x",
               BLOCK_COMPLETE(seg_n));

        return rx;
    }

    return NULL;
}

static int trans_seg(struct net_buf_simple *buf, struct bt_mesh_net_rx *net_rx,
                     enum bt_mesh_friend_pdu_type *pdu_type, u64_t *seq_auth,
                     u8_t *seg_count)
{
    struct bt_mesh_rpl *rpl = NULL;
    struct seg_rx *rx = NULL;
    u8_t *hdr = buf->data;
    u16_t seq_zero = 0U;
    u8_t seg_n = 0U;
    u8_t seg_o = 0U;
    int err = 0;

    if (buf->len < 5) {
        BT_ERR("%s, Too short segmented message (len %u)", __func__, buf->len);
        return -EINVAL;
    }

    if (is_replay(net_rx, &rpl)) {
        BT_WARN("Replay: src 0x%04x dst 0x%04x seq 0x%06x",
                net_rx->ctx.addr, net_rx->ctx.recv_dst, net_rx->seq);
        return -EINVAL;
    }

    BT_DBG("ASZMIC %u AKF %u AID 0x%02x", ASZMIC(hdr), AKF(hdr), AID(hdr));

    net_buf_simple_pull(buf, 1);

    seq_zero = net_buf_simple_pull_be16(buf);
    seg_o = (seq_zero & 0x03) << 3;
    seq_zero = (seq_zero >> 2) & TRANS_SEQ_ZERO_MASK;
    seg_n = net_buf_simple_pull_u8(buf);
    seg_o |= seg_n >> 5;
    seg_n &= 0x1f;

    BT_DBG("SeqZero 0x%04x SegO %u SegN %u", seq_zero, seg_o, seg_n);

    if (seg_o > seg_n) {
        BT_ERR("%s, SegO greater than SegN (%u > %u)", __func__, seg_o, seg_n);
        return -EINVAL;
    }

    /* According to Mesh 1.0 specification:
     * "The SeqAuth is composed of the IV Index and the sequence number
     *  (SEQ) of the first segment"
     *
     * Therefore we need to calculate very first SEQ in order to find
     * seqAuth. We can calculate as below:
     *
     * SEQ(0) = SEQ(n) - (delta between seqZero and SEQ(n) by looking into
     * 14 least significant bits of SEQ(n))
     *
     * Mentioned delta shall be >= 0, if it is not then seq_auth will
     * be broken and it will be verified by the code below.
     */
    *seq_auth = SEQ_AUTH(BLE_MESH_NET_IVI_RX(net_rx),
                         (net_rx->seq -
                          ((((net_rx->seq & BIT_MASK(14)) - seq_zero)) &
                           BIT_MASK(13))));

    *seg_count = seg_n + 1;

    /* Look for old RX sessions */
    rx = seg_rx_find(net_rx, seq_auth);
    if (rx) {
        /* Discard old SeqAuth packet */
        if (rx->seq_auth > *seq_auth) {
            BT_WARN("Ignoring old SeqAuth");
            return -EINVAL;
        }

        if (!seg_rx_is_valid(rx, net_rx, hdr, seg_n)) {
            return -EINVAL;
        }

        if (rx->in_use) {
            BT_DBG("Existing RX context. Block 0x%08x", rx->block);
            goto found_rx;
        }

        if (rx->block == BLOCK_COMPLETE(rx->seg_n)) {
            BT_INFO("Got segment for already complete SDU");
            send_ack(net_rx->sub, net_rx->ctx.recv_dst,
                     net_rx->ctx.addr, net_rx->ctx.send_ttl,
                     seq_auth, rx->block, rx->obo);

            if (rpl) {
                update_rpl(rpl, net_rx);
            }

            return -EALREADY;
        }

        /* We ignore instead of sending block ack 0 since the
         * ack timer is always smaller than the incomplete
         * timer, i.e. the sender is misbehaving.
         */
        BT_WARN("Got segment for canceled SDU");
        return -EINVAL;
    }

    /* Bail out early if we're not ready to receive such a large SDU */
    if (!sdu_len_is_ok(net_rx->ctl, seg_n)) {
        BT_ERR("%s, Too big incoming SDU length", __func__);
        send_ack(net_rx->sub, net_rx->ctx.recv_dst, net_rx->ctx.addr,
                 net_rx->ctx.send_ttl, seq_auth, 0,
                 net_rx->friend_match);
        return -EMSGSIZE;
    }

    /* Verify early that there will be space in the Friend Queue(s) in
     * case this message is destined to an LPN of ours.
     */
    if (IS_ENABLED(CONFIG_BLE_MESH_FRIEND) &&
            net_rx->friend_match && !net_rx->local_match &&
            !bt_mesh_friend_queue_has_space(net_rx->sub->net_idx,
                                            net_rx->ctx.addr,
                                            net_rx->ctx.recv_dst, seq_auth,
                                            *seg_count)) {
        BT_ERR("No space in Friend Queue for %u segments", *seg_count);
        send_ack(net_rx->sub, net_rx->ctx.recv_dst, net_rx->ctx.addr,
                 net_rx->ctx.send_ttl, seq_auth, 0,
                 net_rx->friend_match);
        return -ENOBUFS;
    }

    /* Look for free slot for a new RX session */
    rx = seg_rx_alloc(net_rx, hdr, seq_auth, seg_n);
    if (!rx) {
        /* Warn but don't cancel since the existing slots will
         * eventually be freed up and we'll be able to process
         * this one.
         */
        BT_WARN("No free slots for new incoming segmented messages");
        return -ENOMEM;
    }

    rx->obo = net_rx->friend_match;

found_rx:
    if (BIT(seg_o) & rx->block) {
        BT_WARN("Received already received fragment");
        return -EALREADY;
    }

    /* All segments, except the last one, must either have 8 bytes of
     * payload (for 64bit Net MIC) or 12 bytes of payload (for 32bit
     * Net MIC).
     */
    if (seg_o == seg_n) {
        /* Set the expected final buffer length */
        rx->buf.len = seg_n * seg_len(rx->ctl) + buf->len;
        BT_DBG("Target len %u * %u + %u = %u", seg_n, seg_len(rx->ctl),
               buf->len, rx->buf.len);

        if (rx->buf.len > CONFIG_BLE_MESH_RX_SDU_MAX) {
            BT_ERR("Too large SDU len");
            send_ack(net_rx->sub, net_rx->ctx.recv_dst,
                     net_rx->ctx.addr, net_rx->ctx.send_ttl,
                     seq_auth, 0, rx->obo);
            seg_rx_reset(rx, true);
            return -EMSGSIZE;
        }
    } else {
        if (buf->len != seg_len(rx->ctl)) {
            BT_ERR("%s, Incorrect segment size for message type", __func__);
            return -EINVAL;
        }
    }

    /* Reset the Incomplete Timer */
    rx->last = k_uptime_get_32();

    if (!k_delayed_work_remaining_get(&rx->ack) &&
            !bt_mesh_lpn_established()) {
        k_delayed_work_submit(&rx->ack, ack_timeout(rx));
    }

    /* Location in buffer can be calculated based on seg_o & rx->ctl */
    memcpy(rx->buf.data + (seg_o * seg_len(rx->ctl)), buf->data, buf->len);

    BT_INFO("Received %u/%u", seg_o, seg_n);

    /* Mark segment as received */
    rx->block |= BIT(seg_o);

    if (rx->block != BLOCK_COMPLETE(seg_n)) {
        *pdu_type = BLE_MESH_FRIEND_PDU_PARTIAL;
        return 0;
    }

    BT_DBG("Complete SDU");

    if (rpl) {
        update_rpl(rpl, net_rx);
    }

    *pdu_type = BLE_MESH_FRIEND_PDU_COMPLETE;

    k_delayed_work_cancel(&rx->ack);
    send_ack(net_rx->sub, net_rx->ctx.recv_dst, net_rx->ctx.addr,
             net_rx->ctx.send_ttl, seq_auth, rx->block, rx->obo);

    if (net_rx->ctl) {
        err = ctl_recv(net_rx, *hdr, &rx->buf, seq_auth);
    } else {
        err = sdu_recv(net_rx, (rx->seq_auth & 0xffffff), *hdr,
                       ASZMIC(hdr), &rx->buf);
    }

    seg_rx_reset(rx, false);

    return err;
}

int bt_mesh_trans_recv(struct net_buf_simple *buf, struct bt_mesh_net_rx *rx)
{
    u64_t seq_auth = TRANS_SEQ_AUTH_NVAL;
    enum bt_mesh_friend_pdu_type pdu_type = BLE_MESH_FRIEND_PDU_SINGLE;
    struct net_buf_simple_state state = {0};
    u8_t seg_count = 0U;
    int err = 0;

    if (IS_ENABLED(CONFIG_BLE_MESH_FRIEND)) {
        rx->friend_match = bt_mesh_friend_match(rx->sub->net_idx,
                                                rx->ctx.recv_dst);
    } else {
        rx->friend_match = false;
    }

    BT_DBG("src 0x%04x dst 0x%04x seq 0x%08x friend_match %u",
           rx->ctx.addr, rx->ctx.recv_dst, rx->seq, rx->friend_match);

    /* Remove network headers */
    net_buf_simple_pull(buf, BLE_MESH_NET_HDR_LEN);

    BT_DBG("Payload %s", bt_hex(buf->data, buf->len));

    /* If LPN mode is enabled messages are only accepted when we've
     * requested the Friend to send them. The messages must also
     * be encrypted using the Friend Credentials.
     */
    if (IS_ENABLED(CONFIG_BLE_MESH_LOW_POWER) &&
        bt_mesh_lpn_established() && rx->net_if == BLE_MESH_NET_IF_ADV &&
        (!bt_mesh_lpn_waiting_update() || !rx->friend_cred)) {
        BT_WARN("Ignoring unexpected message in Low Power mode");
        return -EAGAIN;
    }

    /* Save the app-level state so the buffer can later be placed in
     * the Friend Queue.
     */
    net_buf_simple_save(buf, &state);

    if (SEG(buf->data)) {
        /* Segmented messages must match a local element or an
         * LPN of this Friend.
         */
        if (!rx->local_match && !rx->friend_match) {
            return 0;
        }

        err = trans_seg(buf, rx, &pdu_type, &seq_auth, &seg_count);
    } else {
        seg_count = 1U;
        err = trans_unseg(buf, rx, &seq_auth);
    }

    /* Notify LPN state machine so a Friend Poll will be sent. If the
     * message was a Friend Update it's possible that a Poll was already
     * queued for sending, however that's fine since then the
     * bt_mesh_lpn_waiting_update() function will return false:
     * we still need to go through the actual sending to the bearer and
     * wait for ReceiveDelay before transitioning to WAIT_UPDATE state.
     * Another situation where we want to notify the LPN state machine
     * is if it's configured to use an automatic Friendship establishment
     * timer, in which case we want to reset the timer at this point.
     *
     */
    if (IS_ENABLED(CONFIG_BLE_MESH_LOW_POWER) &&
        (bt_mesh_lpn_timer() ||
        (bt_mesh_lpn_established() && bt_mesh_lpn_waiting_update()))) {
        bt_mesh_lpn_msg_received(rx);
    }

    net_buf_simple_restore(buf, &state);

    if (IS_ENABLED(CONFIG_BLE_MESH_FRIEND) && rx->friend_match && !err) {
        if (seq_auth == TRANS_SEQ_AUTH_NVAL) {
            bt_mesh_friend_enqueue_rx(rx, pdu_type, NULL,
                                      seg_count, buf);
        } else {
            bt_mesh_friend_enqueue_rx(rx, pdu_type, &seq_auth,
                                      seg_count, buf);
        }
    }

    return err;
}

void bt_mesh_rx_reset(void)
{
    int i;

    BT_DBG("%s", __func__);

    for (i = 0; i < ARRAY_SIZE(seg_rx); i++) {
        seg_rx_reset(&seg_rx[i], true);
    }

    if (IS_ENABLED(CONFIG_BLE_MESH_SETTINGS)) {
        bt_mesh_clear_rpl();
    } else {
        (void)memset(bt_mesh.rpl, 0, sizeof(bt_mesh.rpl));
    }
}

void bt_mesh_tx_reset(void)
{
    int i;

    BT_DBG("%s", __func__);

    for (i = 0; i < ARRAY_SIZE(seg_tx); i++) {
        seg_tx_reset(&seg_tx[i]);
    }
}

#if CONFIG_BLE_MESH_PROVISIONER
void bt_mesh_rx_reset_single(u16_t src)
{
    int i;

    if (!BLE_MESH_ADDR_IS_UNICAST(src)) {
        return;
    }

    for (i = 0; i < ARRAY_SIZE(seg_rx); i++) {
        struct seg_rx *rx = &seg_rx[i];
        if (src == rx->src) {
            seg_rx_reset(rx, true);
        }
    }

    for (i = 0; i < ARRAY_SIZE(bt_mesh.rpl); i++) {
        struct bt_mesh_rpl *rpl = &bt_mesh.rpl[i];
        if (src == rpl->src) {
            memset(rpl, 0, sizeof(struct bt_mesh_rpl));
            if (IS_ENABLED(CONFIG_BLE_MESH_SETTINGS)) {
                bt_mesh_clear_rpl_single(src);
            }
        }
    }
}

void bt_mesh_tx_reset_single(u16_t dst)
{
    int i;

    if (!BLE_MESH_ADDR_IS_UNICAST(dst)) {
        return;
    }

    for (i = 0; i < ARRAY_SIZE(seg_tx); i++) {
        struct seg_tx *tx = &seg_tx[i];
        if (dst == tx->dst) {
            seg_tx_reset(tx);
        }
    }
}
#endif /* CONFIG_BLE_MESH_PROVISIONER */

void bt_mesh_trans_init(void)
{
    int i;

    for (i = 0; i < ARRAY_SIZE(seg_tx); i++) {
        k_delayed_work_init(&seg_tx[i].retransmit, seg_retransmit);
    }

    for (i = 0; i < ARRAY_SIZE(seg_rx); i++) {
        k_delayed_work_init(&seg_rx[i].ack, seg_ack);
        seg_rx[i].buf.__buf = (seg_rx_buf_data +
                               (i * CONFIG_BLE_MESH_RX_SDU_MAX));
        seg_rx[i].buf.data = seg_rx[i].buf.__buf;
    }

    bt_mesh_tx_seg_mutex_new();
    bt_mesh_rx_seg_mutex_new();
}

void bt_mesh_trans_deinit(bool erase)
{
    int i;

    for (i = 0; i < ARRAY_SIZE(seg_rx); i++) {
        seg_rx_reset(&seg_rx[i], true);
    }

    if (erase && IS_ENABLED(CONFIG_BLE_MESH_SETTINGS)) {
        bt_mesh_clear_rpl();
    } else {
        bt_mesh_rpl_clear();
    }

    bt_mesh_tx_reset();

    for (i = 0; i < ARRAY_SIZE(seg_tx); i++) {
        k_delayed_work_free(&seg_tx[i].retransmit);
    }

    for (i = 0; i < ARRAY_SIZE(seg_rx); i++) {
        k_delayed_work_free(&seg_rx[i].ack);
    }

    bt_mesh_tx_seg_mutex_free();
    bt_mesh_rx_seg_mutex_free();
}

void bt_mesh_rpl_clear(void)
{
    BT_DBG("%s", __func__);
    (void)memset(bt_mesh.rpl, 0, sizeof(bt_mesh.rpl));
}

void bt_mesh_heartbeat_send(void)
{
    struct bt_mesh_cfg_srv *cfg = bt_mesh_cfg_get();
    u16_t feat = 0U;
    struct __packed {
        u8_t  init_ttl;
        u16_t feat;
    } hb;
    struct bt_mesh_msg_ctx ctx = {
        .net_idx = cfg->hb_pub.net_idx,
        .app_idx = BLE_MESH_KEY_UNUSED,
        .addr = cfg->hb_pub.dst,
        .send_ttl = cfg->hb_pub.ttl,
    };
    struct bt_mesh_net_tx tx = {
        .sub = bt_mesh_subnet_get(cfg->hb_pub.net_idx),
        .ctx = &ctx,
        .src = bt_mesh_model_elem(cfg->model)->addr,
        .xmit = bt_mesh_net_transmit_get(),
    };

    /* Do nothing if heartbeat publication is not enabled */
    if (cfg->hb_pub.dst == BLE_MESH_ADDR_UNASSIGNED) {
        return;
    }

    hb.init_ttl = cfg->hb_pub.ttl;

    if (bt_mesh_relay_get() == BLE_MESH_RELAY_ENABLED) {
        feat |= BLE_MESH_FEAT_RELAY;
    }

    if (bt_mesh_gatt_proxy_get() == BLE_MESH_GATT_PROXY_ENABLED) {
        feat |= BLE_MESH_FEAT_PROXY;
    }

    if (bt_mesh_friend_get() == BLE_MESH_FRIEND_ENABLED) {
        feat |= BLE_MESH_FEAT_FRIEND;
    }

    if (bt_mesh_lpn_established()) {
        feat |= BLE_MESH_FEAT_LOW_POWER;
    }

    hb.feat = sys_cpu_to_be16(feat);

    BT_INFO("InitTTL %u feat 0x%04x", cfg->hb_pub.ttl, feat);

    bt_mesh_ctl_send(&tx, TRANS_CTL_OP_HEARTBEAT, &hb, sizeof(hb),
                     NULL, NULL);
}

int bt_mesh_app_key_get(const struct bt_mesh_subnet *subnet, u16_t app_idx,
                        const u8_t **key, u8_t *aid, u8_t role, u16_t dst)
{
    struct bt_mesh_app_key *app_key = NULL;

    if (app_idx == BLE_MESH_KEY_DEV) {
        *key = bt_mesh_tx_devkey_get(role, dst);
        if (!*key) {
            BT_ERR("%s, Failed to get Device Key", __func__);
            return -EINVAL;
        }

        *aid = 0U;
        return 0;
    }

    if (!subnet) {
        BT_ERR("%s, Invalid subnet", __func__);
        return -EINVAL;
    }

    app_key = bt_mesh_tx_appkey_get(role, app_idx);
    if (!app_key) {
        BT_ERR("%s, AppKey 0x%04x not exists", __func__, app_idx);
        return -ENOENT;
    }

    if (subnet->kr_phase == BLE_MESH_KR_PHASE_2 && app_key->updated) {
        *key = app_key->keys[1].val;
        *aid = app_key->keys[1].id;
    } else {
        *key = app_key->keys[0].val;
        *aid = app_key->keys[0].id;
    }

    return 0;
}