OVMS3-idf/tools/tiny-test-fw/IDF/IDFDUT.py

# Copyright 2015-2017 Espressif Systems (Shanghai) PTE LTD
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http:#www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

""" DUT for IDF applications """
import os
import os.path
import sys
import re
import functools
import tempfile

from serial.tools import list_ports

from collections import namedtuple

import DUT

try:
    import esptool
except ImportError:  # cheat and use IDF's copy of esptool if available
    idf_path = os.getenv("IDF_PATH")
    if not idf_path or not os.path.exists(idf_path):
        raise
    sys.path.insert(0, os.path.join(idf_path, "components", "esptool_py", "esptool"))
    import esptool


class IDFToolError(OSError):
    pass


def _uses_esptool(func):
    """ Suspend listener thread, connect with esptool,
    call target function with esptool instance,
    then resume listening for output
    """
    @functools.wraps(func)
    def handler(self, *args, **kwargs):
        self.stop_receive()

        settings = self.port_inst.get_settings()

        rom = esptool.ESP32ROM(self.port_inst)
        rom.connect('hard_reset')
        esp = rom.run_stub()

        ret = func(self, esp, *args, **kwargs)

        self.port_inst.apply_settings(settings)
        self.start_receive()
        return ret
    return handler


class IDFDUT(DUT.SerialDUT):
    """ IDF DUT, extends serial with esptool methods

    (Becomes aware of IDFApp instance which holds app-specific data)
    """

    # /dev/ttyAMA0 port is listed in Raspberry Pi
    # /dev/tty.Bluetooth-Incoming-Port port is listed in Mac
    INVALID_PORT_PATTERN = re.compile(r"AMA|Bluetooth")
    # if need to erase NVS partition in start app
    ERASE_NVS = True

    def __init__(self, name, port, log_file, app, **kwargs):
        super(IDFDUT, self).__init__(name, port, log_file, app, **kwargs)

    @classmethod
    def get_mac(cls, app, port):
        """
        get MAC address via esptool

        :param app: application instance (to get tool)
        :param port: serial port as string
        :return: MAC address or None
        """
        try:
            esp = esptool.ESP32ROM(port)
            esp.connect()
            return esp.read_mac()
        except RuntimeError:
            return None
        finally:
            esp._port.close()

    @classmethod
    def confirm_dut(cls, port, app, **kwargs):
        return cls.get_mac(app, port) is not None

    @_uses_esptool
    def _try_flash(self, esp, erase_nvs, baud_rate):
        """
        Called by start_app() to try flashing at a particular baud rate.

        Structured this way so @_uses_esptool will reconnect each time
        """
        try:
            # note: opening here prevents us from having to seek back to 0 each time
            flash_files = [(offs, open(path, "rb")) for (offs, path) in self.app.flash_files]

            if erase_nvs:
                address = self.app.partition_table["nvs"]["offset"]
                size = self.app.partition_table["nvs"]["size"]
                nvs_file = tempfile.TemporaryFile()
                nvs_file.write(b'\xff' * size)
                nvs_file.seek(0)
                flash_files.append((int(address, 0), nvs_file))

            # fake flasher args object, this is a hack until
            # esptool Python API is improved
            Flash_Args = namedtuple('write_flash_args',
                                    ['flash_size',
                                     'flash_mode',
                                     'flash_freq',
                                     'addr_filename',
                                     'no_stub',
                                     'compress',
                                     'verify',
                                     'encrypt'])

            flash_args = Flash_Args(
                self.app.flash_settings["flash_size"],
                self.app.flash_settings["flash_mode"],
                self.app.flash_settings["flash_freq"],
                flash_files,
                False,
                True,
                False,
                False
            )

            esp.change_baud(baud_rate)
            esptool.write_flash(esp, flash_args)
        finally:
            for (_,f) in flash_files:
                f.close()

    def start_app(self, erase_nvs=ERASE_NVS):
        """
        download and start app.

        :param: erase_nvs: whether erase NVS partition during flash
        :return: None
        """
        for baud_rate in [921600, 115200]:
            try:
                self._try_flash(erase_nvs, baud_rate)
                break
            except RuntimeError:
                continue
        else:
            raise IDFToolError()

    @_uses_esptool
    def reset(self, esp):
        """
        hard reset DUT

        :return: None
        """
        esp.hard_reset()

    @_uses_esptool
    def erase_partition(self, esp, partition):
        """
        :param partition: partition name to erase
        :return: None
        """
        raise NotImplementedError()  # TODO: implement this
        # address = self.app.partition_table[partition]["offset"]
        size = self.app.partition_table[partition]["size"]
        # TODO can use esp.erase_region() instead of this, I think
        with open(".erase_partition.tmp", "wb") as f:
            f.write(chr(0xFF) * size)

    @_uses_esptool
    def dump_flush(self, esp, output_file, **kwargs):
        """
        dump flush

        :param output_file: output file name, if relative path, will use sdk path as base path.
        :keyword partition: partition name, dump the partition.
                            ``partition`` is preferred than using ``address`` and ``size``.
        :keyword address: dump from address (need to be used with size)
        :keyword size: dump size (need to be used with address)
        :return: None
        """
        if os.path.isabs(output_file) is False:
            output_file = os.path.relpath(output_file, self.app.get_log_folder())
        if "partition" in kwargs:
            partition = self.app.partition_table[kwargs["partition"]]
            _address = partition["offset"]
            _size = partition["size"]
        elif "address" in kwargs and "size" in kwargs:
            _address = kwargs["address"]
            _size = kwargs["size"]
        else:
            raise IDFToolError("You must specify 'partition' or ('address' and 'size') to dump flash")

        content = esp.read_flash(_address, _size)
        with open(output_file, "wb") as f:
            f.write(content)

    @classmethod
    def list_available_ports(cls):
        ports = [x.device for x in list_ports.comports()]
        espport = os.getenv('ESPPORT')
        if not espport:
            # It's a little hard filter out invalid port with `serial.tools.list_ports.grep()`:
            # The check condition in `grep` is: `if r.search(port) or r.search(desc) or r.search(hwid)`.
            # This means we need to make all 3 conditions fail, to filter out the port.
            # So some part of the filters will not be straight forward to users.
            # And negative regular expression (`^((?!aa|bb|cc).)*$`) is not easy to understand.
            # Filter out invalid port by our own will be much simpler.
            return [x for x in ports if not cls.INVALID_PORT_PATTERN.search(x)]

        # On MacOs with python3.6: type of espport is already utf8
        if isinstance(espport, type(u'')):
            port_hint = espport
        else:
            port_hint = espport.decode('utf8')

        # If $ESPPORT is a valid port, make it appear first in the list
        if port_hint in ports:
            ports.remove(port_hint)
            return [port_hint] + ports

        # On macOS, user may set ESPPORT to /dev/tty.xxx while
        # pySerial lists only the corresponding /dev/cu.xxx port
        if sys.platform == 'darwin' and 'tty.' in port_hint:
            port_hint = port_hint.replace('tty.', 'cu.')
            if port_hint in ports:
                ports.remove(port_hint)
                return [port_hint] + ports

        return ports