ca35121b44
Add variables for TX Freq (t30), RX Freq (t32), CPU Temp (t20), and Location (t31) to Base MMDVM page. These variables are available with Layout ON7LDS L3 or higher. This allows more dynamic info to be displayed without having to use the optional NextionDriver. Note, this doesn't add touch support. For that, use the NextionDriver. Fixed command mangling occuring during serial writes to Nextion due to no ready-state monitoring of display readiness. Added simple thread sleep to pace the commands as they are sent. Allows the display a chance to process the command before another one is blasted in. Prevents mangling of commands sent before display is ready to accept them. Hardwired to 10 msec--let's see if that's enough. Added setting in mmdvm conf file, Section: [Nextion] Setting: DisplayTempInFahrenheit Value= 0 (default) for C. 1=Fahrenheit This controls the value sent to t20.
625 lines
14 KiB
C++
625 lines
14 KiB
C++
/*
|
|
* Copyright (C) 2016,2017,2018 by Jonathan Naylor G4KLX
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include "Display.h"
|
|
#include "Defines.h"
|
|
#include "SerialController.h"
|
|
#include "ModemSerialPort.h"
|
|
#include "NullDisplay.h"
|
|
#include "TFTSerial.h"
|
|
#include "LCDproc.h"
|
|
#include "Nextion.h"
|
|
#include "Conf.h"
|
|
#include "Modem.h"
|
|
#include "UMP.h"
|
|
#include "Log.h"
|
|
|
|
#if defined(HD44780)
|
|
#include "HD44780.h"
|
|
#endif
|
|
|
|
#if defined(OLED)
|
|
#include "OLED.h"
|
|
#endif
|
|
|
|
#include <cstdio>
|
|
#include <cassert>
|
|
#include <cstring>
|
|
|
|
CDisplay::CDisplay() :
|
|
m_timer1(3000U, 3U),
|
|
m_timer2(3000U, 3U),
|
|
m_mode1(MODE_IDLE),
|
|
m_mode2(MODE_IDLE)
|
|
{
|
|
}
|
|
|
|
CDisplay::~CDisplay()
|
|
{
|
|
}
|
|
|
|
void CDisplay::setIdle()
|
|
{
|
|
m_timer1.stop();
|
|
m_timer2.stop();
|
|
|
|
m_mode1 = MODE_IDLE;
|
|
m_mode2 = MODE_IDLE;
|
|
|
|
setIdleInt();
|
|
}
|
|
|
|
void CDisplay::setLockout()
|
|
{
|
|
m_timer1.stop();
|
|
m_timer2.stop();
|
|
|
|
m_mode1 = MODE_IDLE;
|
|
m_mode2 = MODE_IDLE;
|
|
|
|
setLockoutInt();
|
|
}
|
|
|
|
void CDisplay::setError(const char* text)
|
|
{
|
|
assert(text != NULL);
|
|
|
|
m_timer1.stop();
|
|
m_timer2.stop();
|
|
|
|
m_mode1 = MODE_IDLE;
|
|
m_mode2 = MODE_IDLE;
|
|
|
|
setErrorInt(text);
|
|
}
|
|
|
|
void CDisplay::setQuit()
|
|
{
|
|
m_timer1.stop();
|
|
m_timer2.stop();
|
|
|
|
m_mode1 = MODE_QUIT;
|
|
m_mode2 = MODE_QUIT;
|
|
|
|
setQuitInt();
|
|
}
|
|
|
|
void CDisplay::writeDStar(const char* my1, const char* my2, const char* your, const char* type, const char* reflector)
|
|
{
|
|
assert(my1 != NULL);
|
|
assert(my2 != NULL);
|
|
assert(your != NULL);
|
|
assert(type != NULL);
|
|
assert(reflector != NULL);
|
|
|
|
m_timer1.start();
|
|
m_mode1 = MODE_IDLE;
|
|
|
|
writeDStarInt(my1, my2, your, type, reflector);
|
|
}
|
|
|
|
void CDisplay::writeDStarRSSI(unsigned char rssi)
|
|
{
|
|
if (rssi != 0U)
|
|
writeDStarRSSIInt(rssi);
|
|
}
|
|
|
|
void CDisplay::writeDStarBER(float ber)
|
|
{
|
|
writeDStarBERInt(ber);
|
|
}
|
|
|
|
void CDisplay::clearDStar()
|
|
{
|
|
if (m_timer1.hasExpired()) {
|
|
clearDStarInt();
|
|
m_timer1.stop();
|
|
m_mode1 = MODE_IDLE;
|
|
} else {
|
|
m_mode1 = MODE_DSTAR;
|
|
}
|
|
}
|
|
|
|
void CDisplay::writeDMR(unsigned int slotNo, const std::string& src, bool group, const std::string& dst, const char* type)
|
|
{
|
|
assert(type != NULL);
|
|
|
|
if (slotNo == 1U) {
|
|
m_timer1.start();
|
|
m_mode1 = MODE_IDLE;
|
|
} else {
|
|
m_timer2.start();
|
|
m_mode2 = MODE_IDLE;
|
|
}
|
|
writeDMRInt(slotNo, src, group, dst, type);
|
|
}
|
|
|
|
void CDisplay::writeDMRRSSI(unsigned int slotNo, unsigned char rssi)
|
|
{
|
|
if (rssi != 0U)
|
|
writeDMRRSSIInt(slotNo, rssi);
|
|
}
|
|
|
|
void CDisplay::writeDMRTA(unsigned int slotNo, unsigned char* talkerAlias, const char* type)
|
|
{
|
|
char TA[32U];
|
|
unsigned char *b;
|
|
unsigned char c;
|
|
int j;
|
|
unsigned int i,t1,t2, TAsize, TAformat;
|
|
|
|
if (strcmp(type," ")==0) { writeDMRTAInt(slotNo, (unsigned char*)TA, type); return; }
|
|
|
|
TAformat=(talkerAlias[0]>>6U) & 0x03U;
|
|
TAsize = (talkerAlias[0]>>1U) & 0x1FU;
|
|
::strcpy(TA,"(could not decode)");
|
|
switch (TAformat) {
|
|
case 0U: // 7 bit
|
|
::memset (&TA,0,32U);
|
|
b=&talkerAlias[0];
|
|
t1=0; t2=0; c=0;
|
|
for (i=0;(i<32U)&&(t2<TAsize);i++) {
|
|
for (j=7U;j>=0;j--) {
|
|
c = (c<<1U) | (b[i] >> j);
|
|
if (++t1==7U) { if (i>0) {TA[t2++]=c & 0x7FU; } t1=0; c=0; }
|
|
}
|
|
}
|
|
break;
|
|
case 1U: // ISO 8 bit
|
|
case 2U: // UTF8
|
|
::strcpy(TA,(char*)talkerAlias+1U);
|
|
break;
|
|
case 3U: // UTF16 poor man's conversion
|
|
t2=0;
|
|
::memset (&TA,0,32U);
|
|
for(i=0;(i<15)&&(t2<TAsize);i++) {
|
|
if (talkerAlias[2U*i+1U]==0)
|
|
TA[t2++]=talkerAlias[2U*i+2U]; else TA[t2++]='?';
|
|
}
|
|
TA[TAsize]=0;
|
|
break;
|
|
}
|
|
LogMessage("DMR Talker Alias (Data Format %u, Received %u/%u char): '%s'", TAformat, ::strlen(TA), TAsize, TA);
|
|
if (::strlen(TA)>TAsize) { if (strlen(TA)<29U) strcat(TA," ?"); else strcpy(TA+28U," ?"); }
|
|
if (strlen((char*)TA)>=4U) writeDMRTAInt(slotNo, (unsigned char*)TA, type);
|
|
|
|
}
|
|
|
|
void CDisplay::writeDMRBER(unsigned int slotNo, float ber)
|
|
{
|
|
writeDMRBERInt(slotNo, ber);
|
|
}
|
|
void CDisplay::clearDMR(unsigned int slotNo)
|
|
{
|
|
if (slotNo == 1U) {
|
|
if (m_timer1.hasExpired()) {
|
|
clearDMRInt(slotNo);
|
|
m_timer1.stop();
|
|
m_mode1 = MODE_IDLE;
|
|
} else {
|
|
m_mode1 = MODE_DMR;
|
|
}
|
|
} else {
|
|
if (m_timer2.hasExpired()) {
|
|
clearDMRInt(slotNo);
|
|
m_timer2.stop();
|
|
m_mode2 = MODE_IDLE;
|
|
} else {
|
|
m_mode2 = MODE_DMR;
|
|
}
|
|
}
|
|
}
|
|
|
|
void CDisplay::writeFusion(const char* source, const char* dest, const char* type, const char* origin)
|
|
{
|
|
assert(source != NULL);
|
|
assert(dest != NULL);
|
|
assert(type != NULL);
|
|
assert(origin != NULL);
|
|
|
|
m_timer1.start();
|
|
m_mode1 = MODE_IDLE;
|
|
|
|
writeFusionInt(source, dest, type, origin);
|
|
}
|
|
|
|
void CDisplay::writeFusionRSSI(unsigned char rssi)
|
|
{
|
|
if (rssi != 0U)
|
|
writeFusionRSSIInt(rssi);
|
|
}
|
|
|
|
void CDisplay::writeFusionBER(float ber)
|
|
{
|
|
writeFusionBERInt(ber);
|
|
}
|
|
|
|
void CDisplay::clearFusion()
|
|
{
|
|
if (m_timer1.hasExpired()) {
|
|
clearFusionInt();
|
|
m_timer1.stop();
|
|
m_mode1 = MODE_IDLE;
|
|
} else {
|
|
m_mode1 = MODE_YSF;
|
|
}
|
|
}
|
|
|
|
void CDisplay::writeP25(const char* source, bool group, unsigned int dest, const char* type)
|
|
{
|
|
assert(source != NULL);
|
|
assert(type != NULL);
|
|
|
|
m_timer1.start();
|
|
m_mode1 = MODE_IDLE;
|
|
|
|
writeP25Int(source, group, dest, type);
|
|
}
|
|
|
|
void CDisplay::writeP25RSSI(unsigned char rssi)
|
|
{
|
|
if (rssi != 0U)
|
|
writeP25RSSIInt(rssi);
|
|
}
|
|
|
|
void CDisplay::writeP25BER(float ber)
|
|
{
|
|
writeP25BERInt(ber);
|
|
}
|
|
|
|
void CDisplay::clearP25()
|
|
{
|
|
if (m_timer1.hasExpired()) {
|
|
clearP25Int();
|
|
m_timer1.stop();
|
|
m_mode1 = MODE_IDLE;
|
|
} else {
|
|
m_mode1 = MODE_P25;
|
|
}
|
|
}
|
|
|
|
void CDisplay::writeNXDN(const char* source, bool group, unsigned int dest, const char* type)
|
|
{
|
|
assert(source != NULL);
|
|
assert(type != NULL);
|
|
|
|
m_timer1.start();
|
|
m_mode1 = MODE_IDLE;
|
|
|
|
writeNXDNInt(source, group, dest, type);
|
|
}
|
|
|
|
void CDisplay::writeNXDNRSSI(unsigned char rssi)
|
|
{
|
|
if (rssi != 0U)
|
|
writeNXDNRSSIInt(rssi);
|
|
}
|
|
|
|
void CDisplay::writeNXDNBER(float ber)
|
|
{
|
|
writeNXDNBERInt(ber);
|
|
}
|
|
|
|
void CDisplay::clearNXDN()
|
|
{
|
|
if (m_timer1.hasExpired()) {
|
|
clearNXDNInt();
|
|
m_timer1.stop();
|
|
m_mode1 = MODE_IDLE;
|
|
} else {
|
|
m_mode1 = MODE_NXDN;
|
|
}
|
|
}
|
|
|
|
void CDisplay::writePOCSAG(uint32_t ric, const std::string& message)
|
|
{
|
|
m_timer1.start();
|
|
m_mode1 = MODE_POCSAG;
|
|
|
|
writePOCSAGInt(ric, message);
|
|
}
|
|
|
|
void CDisplay::clearPOCSAG()
|
|
{
|
|
if (m_timer1.hasExpired()) {
|
|
clearPOCSAGInt();
|
|
m_timer1.stop();
|
|
m_mode1 = MODE_IDLE;
|
|
} else {
|
|
m_mode1 = MODE_POCSAG;
|
|
}
|
|
}
|
|
|
|
void CDisplay::writeCW()
|
|
{
|
|
m_timer1.start();
|
|
m_mode1 = MODE_CW;
|
|
|
|
writeCWInt();
|
|
}
|
|
|
|
void CDisplay::clock(unsigned int ms)
|
|
{
|
|
m_timer1.clock(ms);
|
|
if (m_timer1.isRunning() && m_timer1.hasExpired()) {
|
|
switch (m_mode1) {
|
|
case MODE_DSTAR:
|
|
clearDStarInt();
|
|
m_mode1 = MODE_IDLE;
|
|
m_timer1.stop();
|
|
break;
|
|
case MODE_DMR:
|
|
clearDMRInt(1U);
|
|
m_mode1 = MODE_IDLE;
|
|
m_timer1.stop();
|
|
break;
|
|
case MODE_YSF:
|
|
clearFusionInt();
|
|
m_mode1 = MODE_IDLE;
|
|
m_timer1.stop();
|
|
break;
|
|
case MODE_P25:
|
|
clearP25Int();
|
|
m_mode1 = MODE_IDLE;
|
|
m_timer1.stop();
|
|
break;
|
|
case MODE_NXDN:
|
|
clearNXDNInt();
|
|
m_mode1 = MODE_IDLE;
|
|
m_timer1.stop();
|
|
break;
|
|
case MODE_POCSAG:
|
|
clearPOCSAGInt();
|
|
m_mode1 = MODE_IDLE;
|
|
m_timer1.stop();
|
|
break;
|
|
case MODE_CW:
|
|
clearCWInt();
|
|
m_mode1 = MODE_IDLE;
|
|
m_timer1.stop();
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
// Timer/mode 2 are only used for DMR
|
|
m_timer2.clock(ms);
|
|
if (m_timer2.isRunning() && m_timer2.hasExpired()) {
|
|
if (m_mode2 == MODE_DMR) {
|
|
clearDMRInt(2U);
|
|
m_mode2 = MODE_IDLE;
|
|
m_timer2.stop();
|
|
}
|
|
}
|
|
|
|
clockInt(ms);
|
|
}
|
|
|
|
void CDisplay::clockInt(unsigned int ms)
|
|
{
|
|
}
|
|
|
|
void CDisplay::writeDStarRSSIInt(unsigned char rssi)
|
|
{
|
|
}
|
|
|
|
void CDisplay::writeDStarBERInt(float ber)
|
|
{
|
|
}
|
|
|
|
void CDisplay::writeDMRRSSIInt(unsigned int slotNo, unsigned char rssi)
|
|
{
|
|
}
|
|
|
|
void CDisplay::writeDMRTAInt(unsigned int slotNo, unsigned char* talkerAlias, const char* type)
|
|
{
|
|
}
|
|
|
|
void CDisplay::writeDMRBERInt(unsigned int slotNo, float ber)
|
|
{
|
|
}
|
|
|
|
void CDisplay::writeFusionRSSIInt(unsigned char rssi)
|
|
{
|
|
}
|
|
|
|
void CDisplay::writeFusionBERInt(float ber)
|
|
{
|
|
}
|
|
|
|
void CDisplay::writeP25RSSIInt(unsigned char rssi)
|
|
{
|
|
}
|
|
|
|
void CDisplay::writeP25BERInt(float ber)
|
|
{
|
|
}
|
|
|
|
void CDisplay::writeNXDNRSSIInt(unsigned char rssi)
|
|
{
|
|
}
|
|
|
|
void CDisplay::writeNXDNBERInt(float ber)
|
|
{
|
|
}
|
|
|
|
|
|
/* Factory method extracted from MMDVMHost.cpp - BG5HHP */
|
|
CDisplay* CDisplay::createDisplay(const CConf& conf, CUMP* ump, CModem* modem)
|
|
{
|
|
CDisplay *display = NULL;
|
|
|
|
std::string type = conf.getDisplay();
|
|
unsigned int dmrid = conf.getDMRId();
|
|
|
|
LogInfo("Display Parameters");
|
|
LogInfo(" Type: %s", type.c_str());
|
|
|
|
if (type == "TFT Serial") {
|
|
std::string port = conf.getTFTSerialPort();
|
|
unsigned int brightness = conf.getTFTSerialBrightness();
|
|
|
|
LogInfo(" Port: %s", port.c_str());
|
|
LogInfo(" Brightness: %u", brightness);
|
|
|
|
ISerialPort* serial = NULL;
|
|
if (port == "modem")
|
|
serial = new CModemSerialPort(modem);
|
|
else
|
|
serial = new CSerialController(port, SERIAL_9600);
|
|
|
|
display = new CTFTSerial(conf.getCallsign(), dmrid, serial, brightness);
|
|
} else if (type == "Nextion") {
|
|
std::string port = conf.getNextionPort();
|
|
unsigned int brightness = conf.getNextionBrightness();
|
|
bool displayClock = conf.getNextionDisplayClock();
|
|
bool utc = conf.getNextionUTC();
|
|
unsigned int idleBrightness = conf.getNextionIdleBrightness();
|
|
unsigned int screenLayout = conf.getNextionScreenLayout();
|
|
unsigned int txFrequency = conf.getTXFrequency();
|
|
unsigned int rxFrequency = conf.getRXFrequency();
|
|
bool displayTempInF = conf.getNextionTempInFahrenheit();
|
|
|
|
LogInfo(" Port: %s", port.c_str());
|
|
LogInfo(" Brightness: %u", brightness);
|
|
LogInfo(" Clock Display: %s", displayClock ? "yes" : "no");
|
|
if (displayClock)
|
|
LogInfo(" Display UTC: %s", utc ? "yes" : "no");
|
|
LogInfo(" Idle Brightness: %u", idleBrightness);
|
|
LogInfo(" Temperature in Fahrenheit: %s ", displayTempInF ? "yes" : "no");
|
|
|
|
switch (screenLayout) {
|
|
case 0U:
|
|
LogInfo(" Screen Layout: G4KLX (Default)");
|
|
break;
|
|
case 2U:
|
|
LogInfo(" Screen Layout: ON7LDS");
|
|
break;
|
|
case 3U:
|
|
LogInfo(" Screen Layout: DIY by ON7LDS");
|
|
break;
|
|
case 4U:
|
|
LogInfo(" Screen Layout: DIY by ON7LDS (High speed)");
|
|
break;
|
|
default:
|
|
LogInfo(" Screen Layout: %u (Unknown)", screenLayout);
|
|
break;
|
|
}
|
|
|
|
if (port == "modem") {
|
|
ISerialPort* serial = new CModemSerialPort(modem);
|
|
display = new CNextion(conf.getCallsign(), dmrid, serial, brightness, displayClock, utc, idleBrightness, screenLayout, txFrequency, rxFrequency, displayTempInF, conf.getLocation());
|
|
} else if (port == "ump") {
|
|
if (ump != NULL) {
|
|
display = new CNextion(conf.getCallsign(), dmrid, ump, brightness, displayClock, utc, idleBrightness, screenLayout, txFrequency, rxFrequency, displayTempInF, conf.getLocation());
|
|
} else {
|
|
LogInfo(" NullDisplay loaded");
|
|
display = new CNullDisplay;
|
|
}
|
|
} else {
|
|
SERIAL_SPEED baudrate = SERIAL_9600;
|
|
if (screenLayout==4U)
|
|
baudrate = SERIAL_115200;
|
|
|
|
LogInfo(" Display baudrate: %u ",baudrate);
|
|
ISerialPort* serial = new CSerialController(port, baudrate);
|
|
display = new CNextion(conf.getCallsign(), dmrid, serial, brightness, displayClock, utc, idleBrightness, screenLayout, txFrequency, rxFrequency, displayTempInF, conf.getLocation());
|
|
}
|
|
} else if (type == "LCDproc") {
|
|
std::string address = conf.getLCDprocAddress();
|
|
unsigned int port = conf.getLCDprocPort();
|
|
unsigned int localPort = conf.getLCDprocLocalPort();
|
|
bool displayClock = conf.getLCDprocDisplayClock();
|
|
bool utc = conf.getLCDprocUTC();
|
|
bool dimOnIdle = conf.getLCDprocDimOnIdle();
|
|
|
|
LogInfo(" Address: %s", address.c_str());
|
|
LogInfo(" Port: %u", port);
|
|
|
|
if (localPort == 0 )
|
|
LogInfo(" Local Port: random");
|
|
else
|
|
LogInfo(" Local Port: %u", localPort);
|
|
|
|
LogInfo(" Dim Display on Idle: %s", dimOnIdle ? "yes" : "no");
|
|
LogInfo(" Clock Display: %s", displayClock ? "yes" : "no");
|
|
|
|
if (displayClock)
|
|
LogInfo(" Display UTC: %s", utc ? "yes" : "no");
|
|
|
|
display = new CLCDproc(address.c_str(), port, localPort, conf.getCallsign(), dmrid, displayClock, utc, conf.getDuplex(), dimOnIdle);
|
|
#if defined(HD44780)
|
|
} else if (type == "HD44780") {
|
|
unsigned int rows = conf.getHD44780Rows();
|
|
unsigned int columns = conf.getHD44780Columns();
|
|
std::vector<unsigned int> pins = conf.getHD44780Pins();
|
|
unsigned int i2cAddress = conf.getHD44780i2cAddress();
|
|
bool pwm = conf.getHD44780PWM();
|
|
unsigned int pwmPin = conf.getHD44780PWMPin();
|
|
unsigned int pwmBright = conf.getHD44780PWMBright();
|
|
unsigned int pwmDim = conf.getHD44780PWMDim();
|
|
bool displayClock = conf.getHD44780DisplayClock();
|
|
bool utc = conf.getHD44780UTC();
|
|
|
|
if (pins.size() == 6U) {
|
|
LogInfo(" Rows: %u", rows);
|
|
LogInfo(" Columns: %u", columns);
|
|
|
|
#if defined(ADAFRUIT_DISPLAY) || defined(PCF8574_DISPLAY)
|
|
LogInfo(" Device Address: %#x", i2cAddress);
|
|
#else
|
|
LogInfo(" Pins: %u,%u,%u,%u,%u,%u", pins.at(0U), pins.at(1U), pins.at(2U), pins.at(3U), pins.at(4U), pins.at(5U));
|
|
#endif
|
|
|
|
LogInfo(" PWM Backlight: %s", pwm ? "yes" : "no");
|
|
if (pwm) {
|
|
LogInfo(" PWM Pin: %u", pwmPin);
|
|
LogInfo(" PWM Bright: %u", pwmBright);
|
|
LogInfo(" PWM Dim: %u", pwmDim);
|
|
}
|
|
|
|
LogInfo(" Clock Display: %s", displayClock ? "yes" : "no");
|
|
if (displayClock)
|
|
LogInfo(" Display UTC: %s", utc ? "yes" : "no");
|
|
|
|
display = new CHD44780(rows, columns, conf.getCallsign(), dmrid, pins, i2cAddress, pwm, pwmPin, pwmBright, pwmDim, displayClock, utc, conf.getDuplex());
|
|
}
|
|
#endif
|
|
|
|
#if defined(OLED)
|
|
} else if (type == "OLED") {
|
|
unsigned char type = conf.getOLEDType();
|
|
unsigned char brightness = conf.getOLEDBrightness();
|
|
bool invert = conf.getOLEDInvert();
|
|
bool scroll = conf.getOLEDScroll();
|
|
display = new COLED(type, brightness, invert, scroll, conf.getDMRNetworkSlot1(), conf.getDMRNetworkSlot2());
|
|
#endif
|
|
} else {
|
|
LogWarning("No valid display found, disabling");
|
|
display = new CNullDisplay;
|
|
}
|
|
|
|
bool ret = display->open();
|
|
if (!ret) {
|
|
delete display;
|
|
display = new CNullDisplay;
|
|
}
|
|
|
|
return display;
|
|
}
|