# This file maps the raw RSSI values to dBm values to send to the DMR network. A number of data
# points should be entered and the software will use those to work out the in-between values.
#
# The format of the file is:
# Raw RSSI Value		dBm Value		#output voltage
#
# The following values were measured with a Marconi 2024 signal generator.
# Setup is MMDVM (PCB by Toufik, F0DEI v1.1) on a STM32F446RE Nucleo board.
# The values in the comments are the voltage measured at the TB7100 RSSI output pin.
# Florian DF2ET, 03.03.2017
#
2303		-22		#2.93
2256		-25		#2.86
2184		-28		#2.77
2159		-31		#2.74
2095		-34		#2.66
2040		-37		#2.59
1985		-40		#2.52
1922		-43		#2.44
1868		-46		#2.37
1804		-49		#2.29
1758		-52		#2.23
1694		-55		#2.15
1640		-58		#2.08
1568		-61		#1.99
1540		-64		#1.95
1459		-67		#1.85
1403		-70		#1.78
1340		-73		#1.70
1287		-76		#1.63
1233		-79		#1.56
1178		-82		#1.49
1116		-85		#1.41
1054		-88		#1.33
1000		-91		#1.27
945		-94		#1.20
890		-97		#1.13
830		-100		#1.05
768		-103		#0.97
715		-106		#0.90
660		-109		#0.83
600		-112		#0.76
540		-115		#0.68
500		-118		#0.63
450		-121		#0.57
420		-124		#0.52
390		-127		#0.48
370		-130		#0.47