# This file maps the raw RSSI values to dBm values to send to the DMR network. A number of data
# points should be entered and the software will use those to work out the in-between values.
#
# The format of the file is:
# Raw RSSI Value		dBm Value		#output voltage
#
# The following values were measured with a Marconi 2024 signal generator.
# Setup is MMDVM (PCB by Toufik, F0DEI v1.1) on a STM32F446RE Nucleo board.
# The values in the comments are the voltage measured at the GM340 RSSI output pin.
# Florian DF2ET, 07.04.2017
#
1461		-46		#1.87
1461		-49		#1.87
1457		-52		#1.86
1446		-55		#1.85
1422		-58		#1.82
1381		-61		#1.77
1334		-64		#1.71
1284		-67		#1.64
1240		-70		#1.59
1200		-73		#1.54
1162		-76		#1.49
1121		-79		#1.44
1073		-82		#1.38
1032		-85		#1.32
995		-88		#1.28
961		-91		#1.23
921		-94		#1.18
878		-97		#1.13
830		-100		#1.07
785		-103		#1.01
742		-106		#0.95
701		-109		#0.90
657		-112		#0.85
610		-115		#0.79
571		-118		#0.74
536		-121		#0.69
505		-124		#0.65
479		-127		#0.62
463		-130		#0.60
454		-133		#0.59