Commit graph

125 commits

Author SHA1 Message Date
Luca Marchesano
f978a91519
Add select ack message dstar
AckMessage = 0 set BER status
AckMessage = 1 set RSSI status
2018-09-14 12:30:48 +02:00
KD4Z
ca35121b44 Add more dynamic variables and fix command manging
Add variables for TX Freq (t30), RX Freq (t32), CPU Temp (t20), and
Location (t31) to Base MMDVM page.   These variables are available with
Layout ON7LDS L3 or higher.  This allows more dynamic info to be
displayed without having to use the optional NextionDriver.  Note, this
doesn't add touch support. For that, use the NextionDriver.
Fixed command mangling occuring during serial writes to Nextion due to
no ready-state monitoring of display readiness.   Added simple thread
sleep to pace the commands as they are sent.  Allows the display a
chance to process the command before another one is blasted in.
Prevents mangling of commands sent before display is ready to accept
them.   Hardwired to 10 msec--let's see if that's enough.
Added setting in mmdvm conf file, Section: [Nextion]  Setting:
DisplayTempInFahrenheit   Value= 0 (default) for C.  1=Fahrenheit  This
controls the value sent to t20.
2018-09-05 16:12:12 -04:00
root
86fb3b6944 New option SendFrameType so one can send transparent data also to the modem serial port.
If set, one then has to specify the frame type (0x80 for modem serial of 0x90 for transparent data) as first byte af the message.
2018-08-13 20:39:16 +02:00
Hootie81
40db88d5f8 modified: Conf.cpp
modified:   Conf.h
	modified:   MMDVMHost.cpp
	modified:   Modem.cpp
	modified:   Modem.h
	modified:   SerialController.cpp
	modified:   SerialController.h
2018-07-19 13:09:00 +00:00
Jonathan Naylor
413a44e088 Add the POCSAG frequency to the modem protocol (for hotspots). 2018-06-12 19:40:49 +01:00
Jonathan Naylor
2a0364a6d4 nitial commit of POCSAG files. 2018-06-07 18:46:03 +01:00
Jonathan Naylor
31beeee604 Add the YSF TX hang parameter. 2018-05-21 21:32:33 +01:00
Jonathan Naylor
48300c0aa8 Merge branch 'master' into icom 2018-03-22 07:14:09 +00:00
Jonathan Naylor
52ec2f205c Add modem transparent modem data mode. Not used on the MMDVM currently. 2018-03-22 07:13:13 +00:00
Jonathan Naylor
98a31e8d20 Allow more control over NXDN networking. 2018-03-12 20:55:53 +00:00
Jonathan Naylor
12cfaec1f6 Align the networking with NXCore. 2018-03-01 20:28:43 +00:00
Jonathan Naylor
635a774c83 Merge branch 'master' into nxdn 2018-02-08 20:50:18 +00:00
Jonathan Naylor
e6ed2e17a1 Roll back the jitter buffer changes. 2018-02-08 20:25:03 +00:00
Jonathan Naylor
3858cf4aec Merge branch 'master' into nxdn 2018-02-01 06:59:46 +00:00
Jonathan Naylor
43fdb770a9 Make the jitter buffer switchable. 2018-02-01 06:59:11 +00:00
Jonathan Naylor
5291a6427c Add more NXDN support files. 2018-01-17 21:21:25 +00:00
Jonathan Naylor
8fa4779ca9 Merge branch 'master' into nxdn 2018-01-16 20:14:57 +00:00
Jonathan Naylor
323179d525 Add more DMR beacon parameters. 2018-01-16 18:35:29 +00:00
Jonathan Naylor
10b0d3c14c Merge branch 'master' into nxdn 2018-01-15 21:12:56 +00:00
Jonathan Naylor
712cfc89c6 Add basic NXDN networking. 2018-01-15 21:03:34 +00:00
Jonathan Naylor
d3395278c6 Add locally timed DMR roaming beacons. 2018-01-15 19:22:01 +00:00
Jonathan Naylor
b2586654a2 Initial commit of NXDN scaffolding. 2018-01-11 19:35:33 +00:00
Andy CA6JAU
1805a98f72 RF power level control for MMDVM_HS compatible devices 2017-12-30 12:05:11 -03:00
ON7LDS
3b62bd1666 New Nextion screen layout with better looking fonts
New parameter for selecting ON7LDS Nextion screen layout
The active ip address of the host is showed on main screen
Nextion DMR page:
* Talker alias (if available) will be decoded and displayed (in green to know it's the TA)
* Font will get smaller if TA is to long
GPS data will be decoded and logged
2017-11-13 21:48:47 +01:00
phl0
ecb4ea1a38
Rename config file values (acc. to #ee93e4ce) 2017-11-09 23:17:25 +01:00
Jonathan Naylor
85e90610d7 Add remote gateway modes to D-Star and P25. 2017-11-09 09:21:22 +00:00
Jonathan Naylor
066e5f0270 Add the optional RX DC Offset parameter. 2017-10-28 12:37:32 +01:00
Jonathan Naylor
31828da9d2 Allow for per mode RF and Network mode hang times. 2017-09-01 09:25:54 +01:00
Jonathan Naylor
9a7828566d Add an optional transmi DC offset value. 2017-08-20 12:07:57 +01:00
phl0
2cc08e8ff8
Fix reorder warning (commit fda4049928) 2017-08-19 21:14:12 +02:00
Jonathan Naylor
fda4049928 Move the Id into the General section. 2017-08-19 16:23:37 +01:00
Jonathan Naylor
23ce9c7b46 Merge branch 'YSFRefactor' 2017-08-19 12:12:05 +01:00
Jonathan Naylor
cf0c70087d Add SelfOnly to P25 based on the DMR Id. 2017-08-15 10:30:05 +01:00
Jonathan Naylor
8b2544ba85 Add SelfOnly to YSF. 2017-08-15 10:11:05 +01:00
Jonathan Naylor
3749b8d9f4 Add configurable scrolling to the OLED display. 2017-08-13 10:57:02 +01:00
Jonathan Naylor
8d9cfb0f46 Add YSF DSQ support. 2017-08-13 10:30:02 +01:00
Jonathan Naylor
194b543b32 Merge pull request #313 from phl0/makeAckTimeAdjustable
Make AckTime adjustable
2017-06-16 08:27:18 +01:00
g0wfv
5e91c1159f Add Tx and Rx frequency offsets
Enables specification of independant Tx and Rx offsets in Hz for Tx and Rx frequencies on DVMega and MMDVM_HS hardware.

Tx and Rx frequencies no longer have to be offset for frequency errors in ADF7021 devices and dashboards (BM/DMR+) will now display intended frequencies.
2017-06-14 16:46:00 +01:00
phl0
f0fc7c7ec9
Make AckTime adjustable 2017-06-14 12:54:44 +02:00
Jonathan Naylor
043ffe96d9 Make the D-Star ack optional. 2017-06-10 13:18:18 +01:00
Jonathan Naylor
c1521ee445 Allow the MMDVM levels to be specified as floating point values. 2017-06-02 16:34:55 +01:00
Jonathan Naylor
9ac4919a4c Move modem tracing to Trace and add a new modem Debug function. 2017-04-14 14:05:30 +01:00
Jonathan Naylor
99d57bf102 Allow for optional seperate (and longer) CW Ids. 2017-04-10 17:55:53 +01:00
Jonathan Naylor
dd2db36409 Remove unused sample dumping code. 2017-04-10 17:54:12 +01:00
Ryan Butler
aae96a1caf This adds the ability to override the UID checking in P25 code to force 7 digit IDs.
Jonathan added this code due to a lack of CRC on P25 checking but some parties desire the ability to have any id.

It's understood that on networked connections, the need to use a 7 digit unique ID like the DMR ID is necessary.

This change is affected by adding a new parameter to the [P25 Network] section called OverrideUIDCheck and it defaults to 0.

The logic is, if the network is enabled, or if the network is disabled and the override is disabled, the check is made, otherwise it is not.

This has been field tested for all 4 configuration cases and found to work as described above.
2017-03-29 10:18:54 -05:00
Jonathan Naylor
1a6f282782 Add YSF low deviation mode. 2017-03-23 20:26:17 +00:00
Jonathan Naylor
d51b7261cf Remove the OscOffset parameter. 2017-03-07 20:38:06 +00:00
Jonathan Naylor
1dbaec9331 Increase TA and GPS to message level, and allow it to be controlled from
the ini file.
2017-02-27 20:17:55 +00:00
Jonathan Naylor
fc477d9abf Add full frame file dumping. 2017-02-20 21:36:35 +00:00
Jonathan Naylor
ac22f0b783 Add an optional error reply for D-Star. 2017-02-16 19:49:58 +00:00