Adding the line # Port=/dev/ttyAMA0 to MMDVM.ini [Modem] section, to make it easier to try out the correct port setting fore the more and more commonly used STM32 Pi hat boards.
New parameter for selecting ON7LDS Nextion screen layout
The active ip address of the host is showed on main screen
Nextion DMR page:
* Talker alias (if available) will be decoded and displayed (in green to know it's the TA)
* Font will get smaller if TA is to long
GPS data will be decoded and logged
Enables specification of independant Tx and Rx offsets in Hz for Tx and Rx frequencies on DVMega and MMDVM_HS hardware.
Tx and Rx frequencies no longer have to be offset for frequency errors in ADF7021 devices and dashboards (BM/DMR+) will now display intended frequencies.
Jonathan added this code due to a lack of CRC on P25 checking but some parties desire the ability to have any id.
It's understood that on networked connections, the need to use a 7 digit unique ID like the DMR ID is necessary.
This change is affected by adding a new parameter to the [P25 Network] section called OverrideUIDCheck and it defaults to 0.
The logic is, if the network is enabled, or if the network is disabled and the override is disabled, the check is made, otherwise it is not.
This has been field tested for all 4 configuration cases and found to work as described above.
If you run another LCDproc client that doesn't dim the display when it displays its info, the display will effectively flash on and off (or dim/bright depending on your LCDd configuration) as it switches screens between MMDVMHost and the other client(s).
Making the dimming optional and turning it off in the host stops this "annoyance".