Commit graph

102 commits

Author SHA1 Message Date
ON7LDS
3b62bd1666 New Nextion screen layout with better looking fonts
New parameter for selecting ON7LDS Nextion screen layout
The active ip address of the host is showed on main screen
Nextion DMR page:
* Talker alias (if available) will be decoded and displayed (in green to know it's the TA)
* Font will get smaller if TA is to long
GPS data will be decoded and logged
2017-11-13 21:48:47 +01:00
phl0
ecb4ea1a38
Rename config file values (acc. to #ee93e4ce) 2017-11-09 23:17:25 +01:00
Jonathan Naylor
85e90610d7 Add remote gateway modes to D-Star and P25. 2017-11-09 09:21:22 +00:00
Jonathan Naylor
066e5f0270 Add the optional RX DC Offset parameter. 2017-10-28 12:37:32 +01:00
Jonathan Naylor
31828da9d2 Allow for per mode RF and Network mode hang times. 2017-09-01 09:25:54 +01:00
Jonathan Naylor
9a7828566d Add an optional transmi DC offset value. 2017-08-20 12:07:57 +01:00
phl0
2cc08e8ff8
Fix reorder warning (commit fda4049928) 2017-08-19 21:14:12 +02:00
Jonathan Naylor
fda4049928 Move the Id into the General section. 2017-08-19 16:23:37 +01:00
Jonathan Naylor
23ce9c7b46 Merge branch 'YSFRefactor' 2017-08-19 12:12:05 +01:00
Jonathan Naylor
cf0c70087d Add SelfOnly to P25 based on the DMR Id. 2017-08-15 10:30:05 +01:00
Jonathan Naylor
8b2544ba85 Add SelfOnly to YSF. 2017-08-15 10:11:05 +01:00
Jonathan Naylor
3749b8d9f4 Add configurable scrolling to the OLED display. 2017-08-13 10:57:02 +01:00
Jonathan Naylor
8d9cfb0f46 Add YSF DSQ support. 2017-08-13 10:30:02 +01:00
Jonathan Naylor
194b543b32 Merge pull request #313 from phl0/makeAckTimeAdjustable
Make AckTime adjustable
2017-06-16 08:27:18 +01:00
g0wfv
5e91c1159f Add Tx and Rx frequency offsets
Enables specification of independant Tx and Rx offsets in Hz for Tx and Rx frequencies on DVMega and MMDVM_HS hardware.

Tx and Rx frequencies no longer have to be offset for frequency errors in ADF7021 devices and dashboards (BM/DMR+) will now display intended frequencies.
2017-06-14 16:46:00 +01:00
phl0
f0fc7c7ec9
Make AckTime adjustable 2017-06-14 12:54:44 +02:00
Jonathan Naylor
043ffe96d9 Make the D-Star ack optional. 2017-06-10 13:18:18 +01:00
Jonathan Naylor
c1521ee445 Allow the MMDVM levels to be specified as floating point values. 2017-06-02 16:34:55 +01:00
Jonathan Naylor
9ac4919a4c Move modem tracing to Trace and add a new modem Debug function. 2017-04-14 14:05:30 +01:00
Jonathan Naylor
99d57bf102 Allow for optional seperate (and longer) CW Ids. 2017-04-10 17:55:53 +01:00
Jonathan Naylor
dd2db36409 Remove unused sample dumping code. 2017-04-10 17:54:12 +01:00
Ryan Butler
aae96a1caf This adds the ability to override the UID checking in P25 code to force 7 digit IDs.
Jonathan added this code due to a lack of CRC on P25 checking but some parties desire the ability to have any id.

It's understood that on networked connections, the need to use a 7 digit unique ID like the DMR ID is necessary.

This change is affected by adding a new parameter to the [P25 Network] section called OverrideUIDCheck and it defaults to 0.

The logic is, if the network is enabled, or if the network is disabled and the override is disabled, the check is made, otherwise it is not.

This has been field tested for all 4 configuration cases and found to work as described above.
2017-03-29 10:18:54 -05:00
Jonathan Naylor
1a6f282782 Add YSF low deviation mode. 2017-03-23 20:26:17 +00:00
Jonathan Naylor
d51b7261cf Remove the OscOffset parameter. 2017-03-07 20:38:06 +00:00
Jonathan Naylor
1dbaec9331 Increase TA and GPS to message level, and allow it to be controlled from
the ini file.
2017-02-27 20:17:55 +00:00
Jonathan Naylor
fc477d9abf Add full frame file dumping. 2017-02-20 21:36:35 +00:00
Jonathan Naylor
ac22f0b783 Add an optional error reply for D-Star. 2017-02-16 19:49:58 +00:00
phl0
8ffdb9bd20
Optional non Embedded LC data suppression 2017-01-16 13:10:23 +01:00
Jonathan Naylor
af721f89e2 Add RSSI display for all modes. 2017-01-05 19:15:10 +00:00
Jonathan Naylor
aac48cb58f Use a linear interpolator for the reported RSSI values. 2016-12-21 19:58:46 +00:00
Jonathan Naylor
59080e1bd7 Complete the restructuring of the DMR access control. 2016-12-21 19:06:29 +00:00
Jonathan Naylor
a28508b8b1 Initial removal of TG rewrite code. 2016-12-21 18:06:43 +00:00
Jonathan Naylor
b69336dca1 Clean up the OLED configuration. 2016-11-03 21:43:29 +00:00
Jonathan Naylor
34538d8b3f Add the optional DMR network options command. 2016-11-03 19:27:52 +00:00
Jonathan Naylor
015896a299 Add the host support for the UMP. 2016-11-03 19:07:44 +00:00
Tony Corbett G0WFV
44e8f6717a LCDproc: Make dimming the status screen optional
If you run another LCDproc client that doesn't dim the display when it displays its info, the display will effectively flash on and off (or dim/bright depending on your LCDd configuration) as it switches screens between MMDVMHost and the other client(s).

Making the dimming optional and turning it off in the host stops this "annoyance".
2016-10-29 22:07:54 +03:00
Tony Corbett G0WFV
627e4f1dc3 Initial LCDproc support 2016-10-28 13:22:20 +01:00
Jonathan Naylor
40c086bad8 Load the DMR Id lookup table periodically. 2016-10-10 19:15:30 +01:00
Jonathan Naylor
878b4d6d73 Add controls for the CW Id level. 2016-10-10 17:46:37 +01:00
Jonathan Naylor
25cfff3ada Merge branch 'master' into P25 2016-09-27 19:47:07 +01:00
Jonathan Naylor
9408367a0f Allow for remote System Fusion gateway operation. 2016-09-26 18:07:06 +01:00
Simon
dfb3630315 Tidy up as per Jonathan's comments 2016-09-22 16:47:04 +01:00
Simon
65bdc54997 Adding ini options for TGRewrite code 2016-09-21 16:33:35 +01:00
Simon
90bad8d9c8 wip 2016-09-19 13:39:51 +01:00
Simon
b6f4842b7f Completed TG Rewrite, added config options. 2016-09-15 20:41:14 +01:00
Jonathan Naylor
34e0d10343 A semi-working P25 repeater without much FEC. 2016-09-12 23:26:05 +01:00
Jonathan Naylor
434cee8ce0 Merge branch 'master' into P25 2016-09-10 14:58:41 +01:00
Jonathan Naylor
dc2028dd6a Start full host support got P25. 2016-09-08 18:38:59 +01:00
Jonathan Naylor
e04d76584e Configurable DMR jitter buffer. 2016-09-06 19:42:15 +01:00
Jonathan Naylor
f1f69bb4ee Add independent mode output levels. 2016-08-09 07:08:37 +01:00