MMDVMHost-Private/README.md

44 lines
2 KiB
Markdown
Raw Normal View History

2020-05-21 10:17:02 +00:00
These are the source files for building the MMDVMHost, the program that
interfaces to the MMDVM or DVMega on the one side, and a suitable network on
the other. It supports D-Star, DMR, P25 Phase 1, NXDN, System Fusion,
POCSAG, and FM on the MMDVM, and D-Star, DMR, and System Fusion on the DVMega.
On the D-Star side the MMDVMHost interfaces with the ircDDB Gateway, on DMR it
2020-11-24 09:27:01 +00:00
connects to the DMR Gateway to allow for connection to multiple DMR networks,
on System Fusion it connects to the YSF Gateway to allow
2020-05-21 10:17:02 +00:00
access to the FCS and YSF networks. On P25 it connects to the P25 Gateway. On
NXDN it connects to the NXDN Gateway which provides access to the NXDN and
NXCore talk groups. It uses the DAPNET Gateway to access DAPNET to receive
paging messages. Finally it uses the FM Gateway to interface to existing FM
networks.
It builds on 32-bit and 64-bit Linux as well as on Windows using Visual Studio
2019 on x86 and x64. It can optionally control various Displays. Currently
these are:
2016-04-22 09:37:22 +00:00
- HD44780 (sizes 2x16, 2x40, 4x16, 4x20)
- Support for HD44780 via 4 bit GPIO connection (user selectable pins)
- Adafruit 16x2 LCD+Keypad Kits (I2C)
- Connection via PCF8574 GPIO Extender (I2C)
2018-08-20 09:34:19 +00:00
- Nextion TFTs (all sizes, both Basic and Enhanced versions)
- OLED 128x64 (SSD1306)
- LCDproc
2016-04-22 09:37:22 +00:00
2020-05-21 10:17:02 +00:00
The Nextion displays can connect to the UART on the Raspberry Pi, or via a USB
to TTL serial converter like the FT-232RL. It may also be connected to the UART
output of the MMDVM modem (Arduino Due, STM32, Teensy), or to the UART output
on the UMP.
2020-05-21 10:17:02 +00:00
The HD44780 displays are integrated with wiringPi for Raspberry Pi based
platforms.
2017-01-06 10:30:48 +00:00
2020-05-21 10:17:02 +00:00
The OLED display needs an extra library see OLED.md
2020-05-21 10:17:02 +00:00
The LCDproc support enables the use of a multitude of other LCD screens. See
the [supported devices](http://lcdproc.omnipotent.net/hardware.php3) page on
the LCDproc website for more info.
2020-05-21 10:17:02 +00:00
This software is licenced under the GPL v2 and is intended for amateur and
educational use only. Use of this software for commercial purposes is strictly
forbidden.