MMDVMHost-Private/Nextion_ON7LDS/README-L3

230 lines
5.5 KiB
Text
Raw Normal View History

Nextion Display Layouts by ON7LDS (for MMDVMHost)
=================================================
####################################
# #
# screenLayout 3 & 4 files (-L3) #
# #
# ON7LDS DIY layouts #
# #
####################################
The screenlayout has to be selected with the parameter ScreenLayout in the
MMDVM.ini file under the Nextion section. This way, the extra functions
are activated.
0 = auto (future use, for now it's G4KLX layout)
1 = G4KLX layout
2 = ON7LDS layout (see README-L2)
3 = ON7LDS DIY layout (this README file)
4 = ON7LDS DIY layout High Speed (this README file)
screenLayout 3 and 4 are the same, but selecting 3, MMDVMHost will communicate
at 9600bps with the display and selecting 4 will set the baudrate to 115200.
If you select 4 (115200bps) *you* have to program your Nextion to default to
that baudrate.
How to set the default Nextion Display baudrate ?
You could use the Nextion editor, connect to your display with the debug
tool (do not forget to select your display and not the simulator) and
give the command 'bauds=115200'.
Another option is to set the command above in the Preinitialization Event
of the first page. Nextion recommends to do the latter in any case,
because 'on rare occasions bauds has become lost'
ON7LDS DIY layouts
------------------
When selecting this layout, all processing can and should be done in the
Nextion display itself.
Whenever MMDVMHost sends new data to the screen, it also sends information
about what was sent as a number in global variable MMDVM.status.
(see further in this document for a table of numbers and their events)
Then MMDVMHost activates the Touch Press Event of object 'S0' of the
active page.
In this event procedure, all processing can be done.
Check the Touch Press Event of object 'S0' of the DMR page of the example
HMI file. As a straightforward example, the code there will show you how
to do some tasks when receiving data from MMDVMHost or NextionDriver:
- change colors and fonts of the TA on the DMR page when it arrives.
(TA length calculation is done in the display itself !)
- remove the slot number from t2.txt (since it's always 2)
- in the middle of the DMR screen, the previous user is displayed
for each slot (S1 at the left, S2 at the right)
This is done by copying the data from the ID/TA field to these
fields at call end.
The examples are there to give you an idea of what can be done.
It is up to your imagination to go even further.
When, for example, you want to change the text 'listening' to some
other text, like 'RX', you just have to monitor the event status and
take action in the Touch Event of S0 of the corresponding page.
Or you could hide/show pictures, switch to other pages, etc.
Check the NextionDriver program and the display layouts there to see
some other examples of what can be done by programming in the
display. (https://github.com/on7lds/NextionDriver)
NOTE: it might be good to *not* remove fields from the display when you do not
need them, but make them small (i.e. 10 x 10 pixels) and put them aside:
Give them the same font colour and background colour as where you put them
OR
Put them behind some picture: put them on top of the picture, then select the
picture and click the 'Bring Top' button to put it on top of all those fields
OR
set them invisible when the page is selected (with the 'vis' command) in the
preinitialize event of the page
This way, you can use the data from the fields to process them
as is done with the GPS data in the example.
Status codes that will be sent:
-------------------------------
The status code gives more information about what was sent in the
changed field.
1 : page MMDVM
2 : page D-Star
3 : page DMR
4 : page YSF
5 : page P25
6 : page NXDN
7 : page POCSAG
11 : IDLE
12 : CW
13 : ERROR text
14 : ERROR
15 : LOCKOUT
16 : IPaddress
2017-12-19 20:02:51 +00:00
17 : ID/Call (t0 and t4,t5 are sent)
19 : END
20 : RX Frequency
21 : TX Frequency
22 : Temperature
23 : Location
41 : D-Star listening
42 : type/my1/my2
45 : your
46 : reflector
47 : RSSI
48 : ber
61 : DMR listening1
62 : ID1
63 : TA1
64 : Call end1
65 : TG1
66 : RSSI1
67 : ber1
69 : DMR listening2
70 : ID2
71 : TA2
72 : Call end2
73 : TG2
74 : RSSI2
75 : ber2
76 : GPS1 (t8,t9,t12)
77 : GPS2 (t10,t11,t13)
81 : YSF listening
82 : src
83 : dest
84 : origin
85 : RSSI
86 : ber
101 : P25 listening
102 : source
103 : dest
104 : RSSI
105 : ber
121 : NXDN listening
122 : source
123 : dest
124 : RSSI
125 : ber
132 : RIC
133 : message text
134 : waiting
Fields (and their numbers) on the pages, used by MMDVMHost
----------------------------------------------------------
MMDVM
t0 : owner call & ID / errortext LOCKOUT
t1 : status / ERROR
t2 : date & time
screenLayout >2 :
t3 : ip address
t4 : owner call
t5 : owner ID
t20 : CPU Temperature in C. ( Can be changed to F in mmdmvhost config setting: [NEXTION] Section, Setting=DisplayTempInFahrenheit=1)
t30 : RX Frequency
t31 : Location
t32 : TX Frequency
D-Star
t0 : type my1 my2
t1 : your
t2 : reflector
t3 : rssi
t4 : ber
DMR
t0 : src1 id / call / TA
t1 : dst
t2 : src2 id / call / TA
t3 : dst
t4 : rssi1
t5 : rssi2
t6 : ber1
t7 : ber2
screenLayout >2 :
t8 : GPS1 dec
t9 : GPS1 DMS
t10: GPS2 dec
t11: GPS2 DMS
t12: GPS1 err
t13: GPS2 err
YSF
t0 : type,source
t1 : dst
t2 : src
t3 : rssi
t4 : ber
P25
t0 : type,source
t1 : dst
t2 : rssi
t3 : ber
NXDN
t0 : type,source
t1 : dst
t2 : rssi
t3 : ber
POCSAG
t0 : waiting / RIC
t1 : message