Crash_Override/MMDVMHost-Private
1
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
MMDVMHost-Private/MMDVM.ini

171 lines
2.4 KiB
INI
Raw Normal View History

Initial commit
2016-01-14 18:45:04 +00:00
[General]
Set fixed mode
2022-07-29 17:24:39 +00:00
Callsign=MUTRPT
Id=1337
Handle data transmissions and use new method for timing spacing on RF.
2016-01-18 18:36:14 +00:00
Timeout=180
Initial commit
2016-01-14 18:45:04 +00:00
Duplex=1
Add seperate RF and Network mode timeouts.
2016-06-22 17:03:56 +00:00
# ModeHang=10
RFModeHang=10
NetModeHang=3
Initial commit
2016-01-14 18:45:04 +00:00
Display=None
Add daemonisation under Linux and other enhancements (from Simon G7RZU)
2016-05-03 22:01:49 +00:00
Daemon=0
Initial commit
2016-01-14 18:45:04 +00:00
[Info]
RXFrequency=435000000
TXFrequency=435000000
Power=1
[Log]
# Logging levels, 0=No logging
Modify the logging system greatly.
2016-03-07 18:42:05 +00:00
DisplayLevel=1
FileLevel=1
FilePath=.
FileRoot=MMDVM
Add optional log file rotation and UDP socket reopening.
2020-10-31 21:35:09 +00:00
FileRotate=1
Initial commit
2016-01-14 18:45:04 +00:00
Add the CW Id.
2016-05-09 20:55:44 +00:00
[CW Id]
Enable=1
Time=10
Allow for optional seperate (and longer) CW Ids.
2017-04-10 16:55:53 +00:00
# Callsign=
Add the CW Id.
2016-05-09 20:55:44 +00:00
Load the DMR Id lookup table periodically.
2016-10-10 18:15:30 +00:00
[DMR Id Lookup]
File=DMRIds.dat
Time=24
Initial commit
2016-01-14 18:45:04 +00:00
[Modem]
Finish off the UDP Controller and more clean-ups.
2021-02-17 19:35:28 +00:00
# Valid values are "null", "uart", "udp", and (on Linux) "i2c"
Clean up the I2C code.
2018-07-19 17:42:23 +00:00
Protocol=uart
More sane modem port protocol handling.
2021-02-16 22:34:25 +00:00
# The port and speed used for a UART connection
# UARTPort=\\.\COM4
# UARTPort=/dev/ttyACM0
UARTPort=/dev/ttyAMA0
UARTSpeed=460800
# The port and address for an I2C connection
I2CPort=/dev/i2c
I2CAddress=0x22
# IP parameters for UDP connection
Put example modem IP parameters into the MMDVM.ini file.
2021-02-19 17:42:58 +00:00
ModemAddress=192.168.2.100
ModemPort=3334
Regularise the local address handling across all of the protocol.
2021-04-25 10:10:35 +00:00
LocalAddress=192.168.2.1
Put example modem IP parameters into the MMDVM.ini file.
2021-02-19 17:42:58 +00:00
LocalPort=3335
More sane modem port protocol handling.
2021-02-16 22:34:25 +00:00
Initial commit
2016-01-14 18:45:04 +00:00
TXInvert=1
RXInvert=0
PTTInvert=0
TXDelay=100
Add Tx and Rx frequency offsets Enables specification of independant Tx and Rx offsets in Hz for Tx and Rx frequencies on DVMega and MMDVM_HS hardware. Tx and Rx frequencies no longer have to be offset for frequency errors in ADF7021 devices and dashboards (BM/DMR+) will now display intended frequencies.
2017-06-14 15:44:23 +00:00
RXOffset=0
TXOffset=0
Add DMR slot delay parameter.
2016-03-17 18:12:14 +00:00
DMRDelay=0
Initial commit
2016-01-14 18:45:04 +00:00
RXLevel=50
TXLevel=50
Add the optional RX DC Offset parameter.
2017-10-28 11:37:32 +00:00
RXDCOffset=0
Add an optional transmi DC offset value.
2017-08-20 11:07:57 +00:00
TXDCOffset=0
RF power level control for MMDVM_HS compatible devices
2017-12-30 15:05:11 +00:00
RFLevel=100
Set fixed mode
2022-07-29 17:24:39 +00:00
DMRTXLevel=50
Use a linear interpolator for the reported RSSI values.
2016-12-21 19:58:46 +00:00
RSSIMappingFile=RSSI.dat
Add UseCOSAsLockout and FM Access Mode parameters.
2020-07-13 15:02:04 +00:00
UseCOSAsLockout=0
Move modem tracing to Trace and add a new modem Debug function.
2017-04-14 13:05:30 +00:00
Trace=0
More work with decoding and regenerating P25.
2016-09-13 17:27:50 +00:00
Debug=0
Initial commit
2016-01-14 18:45:04 +00:00
Add modem transparent modem data mode. Not used on the MMDVM currently.
2018-03-22 07:13:13 +00:00
[Transparent Data]
Enable=0
RemoteAddress=127.0.0.1
RemotePort=40094
LocalPort=40095
Added SendFrameType with default value option to MMDVM.ini
2018-08-14 16:29:07 +00:00
# SendFrameType=0
Add modem transparent modem data mode. Not used on the MMDVM currently.
2018-03-22 07:13:13 +00:00
Initial commit
2016-01-14 18:45:04 +00:00
[DMR]
Enable=1
Add locally timed DMR roaming beacons.
2018-01-15 19:22:01 +00:00
Beacons=0
Add more DMR beacon parameters.
2018-01-16 18:35:29 +00:00
BeaconInterval=60
BeaconDuration=3
Set fixed mode
2022-07-29 17:24:39 +00:00
ColorCode=7
Allow for locking the MMDVM to the callsign or id of the repeater/hostspot.
2016-04-04 16:40:05 +00:00
SelfOnly=0
Optional non Embedded LC data suppression
2017-01-16 12:10:23 +00:00
EmbeddedLCOnly=0
Increase TA and GPS to message level, and allow it to be controlled from the ini file.
2017-02-27 20:17:55 +00:00
DumpTAData=1
Disable the DMR prefixes by default.
2016-04-05 05:28:00 +00:00
# Prefixes=234,235
Add RSSI display for all modes.
2017-01-05 19:15:10 +00:00
# Slot1TGWhiteList=
# Slot2TGWhiteList=
Add a DMR hang time for locking out disimilar calls.
2016-06-16 20:40:05 +00:00
CallHang=3
Split the DMR TX hang time from the mode hang time.
2016-05-05 16:56:18 +00:00
TXHang=4
Allow for per mode RF and Network mode hang times.
2017-09-01 08:25:54 +00:00
# ModeHang=10
Add mode 4 (force off) for the DMR OVCM flag.
2021-03-07 17:42:55 +00:00
# OVCM Values, 0=off, 1=rx_on, 2=tx_on, 3=both_on, 4=force off
Comment out the OVCM=1 in MMDVM.ini
2019-11-06 05:23:49 +00:00
# OVCM=0
Added blacklist and whitelist options (commented out)
2016-06-07 14:39:12 +00:00
Initial commit
2016-01-14 18:45:04 +00:00
[DMR Network]
Enable=1
Allow optional direct connections to masters again.
2020-12-06 16:12:54 +00:00
# Type may be either 'Direct' or 'Gateway'. When Direct you must provide the Master's
# address as well as the Password, and for DMR+, Options also.
Set fixed mode
2022-07-29 17:24:39 +00:00
Type=Direct
Regularise the local address handling across all of the protocol.
2021-04-25 10:10:35 +00:00
LocalAddress=127.0.0.1
LocalPort=62032
RemoteAddress=127.0.0.1
RemotePort=62031
Allow optional direct connections to masters again.
2020-12-06 16:12:54 +00:00
# Password=P@ssw0rd1234
Changing default Jitter time to 360 ms
2018-02-10 15:35:12 +00:00
Jitter=360
Allow for the disabling of individual slots from the network.
2016-02-15 20:36:05 +00:00
Slot1=1
Slot2=1
Allow optional direct connections to masters again.
2020-12-06 16:12:54 +00:00
# Options=
Allow for per mode RF and Network mode hang times.
2017-09-01 08:25:54 +00:00
# ModeHang=3
Switch off DMR network debugging.
2016-04-21 16:12:47 +00:00
Debug=0
Initial commit
2016-01-14 18:45:04 +00:00
[TFT Serial]
Allow the modem to host a serial display.
2016-10-06 17:38:16 +00:00
# Port=modem
Initial commit
2016-01-14 18:45:04 +00:00
Port=/dev/ttyAMA0
Upgrade the TFT Serial display driver and displayed information.
2016-02-16 18:30:12 +00:00
Brightness=50
Add the HD4470 type display to Raspberry Pis.
2016-03-14 22:58:09 +00:00
[HD44780]
Rows=2
Columns=16
Make I2C address configurable for HD44780 LCD variations Also add a basic README with some pointers on how to connect and configure the LCDs
2016-06-30 19:10:30 +00:00
# For basic HD44780 displays (4-bit connection)
Allow for the configuration of the HD44780 pins.
2016-04-06 16:43:20 +00:00
# rs, strb, d0, d1, d2, d3
Use the duplex flag to indicate that a DVMega is being used.
2016-05-05 16:08:23 +00:00
Pins=11,10,0,1,2,3
HD44780 PWM backlight control
2016-05-01 15:59:43 +00:00
Make I2C address configurable for HD44780 LCD variations Also add a basic README with some pointers on how to connect and configure the LCDs
2016-06-30 19:10:30 +00:00
# Device address for I2C
I2CAddress=0x20
Add a clock to the idle screen
2016-05-28 20:29:30 +00:00
# PWM backlight
PWM=0
HD44780 PWM backlight control
2016-05-01 15:59:43 +00:00
PWMPin=21
PWMBright=100
PWMDim=16
Make I2C address configurable for HD44780 LCD variations Also add a basic README with some pointers on how to connect and configure the LCDs
2016-06-30 19:10:30 +00:00
Add a clock to the idle screen
2016-05-28 20:29:30 +00:00
DisplayClock=1
Correct MMDVM.ini flag error for UTC clock display
2016-05-28 20:36:04 +00:00
UTC=0
Add a clock to the idle screen
2016-05-28 20:29:30 +00:00
And the associated .ini file.
2016-04-06 18:55:28 +00:00
[Nextion]
Allow the modem to host a serial display.
2016-10-06 17:38:16 +00:00
# Port=modem
And the associated .ini file.
2016-04-06 18:55:28 +00:00
Port=/dev/ttyAMA0
Brightness=50
Add the idle clock to the Nextion display.
2016-06-01 10:55:24 +00:00
DisplayClock=1
UTC=0
Fix documentation in mmdvm.ini for Nextion layouts.
2017-11-23 11:56:45 +00:00
#Screen Layout: 0=G4KLX 2=ON7LDS
New Nextion screen layout with better looking fonts New parameter for selecting ON7LDS Nextion screen layout The active ip address of the host is showed on main screen Nextion DMR page: * Talker alias (if available) will be decoded and displayed (in green to know it's the TA) * Font will get smaller if TA is to long GPS data will be decoded and logged
2017-11-13 20:48:47 +00:00
ScreenLayout=2
Make the Nextion idle brightness level configurable.
2016-06-24 09:33:28 +00:00
IdleBrightness=20
Initial version DMR works
2016-05-06 23:03:39 +00:00
[OLED]
Type=3
Brightness=0
Invert=0
Add configurable scrolling to the OLED display.
2017-08-13 09:57:02 +00:00
Scroll=1
Add Support for OLED Rotate
2018-10-30 14:30:41 +00:00
Rotate=0
Integrate the new messages into the OLED display driver.
2018-10-31 16:54:57 +00:00
Cast=0
Introducing LogoScreensaver=1 or 0 parameter for blanking OLED diplays in idle
2019-09-27 20:28:57 +00:00
LogoScreensaver=1
Initial LCDproc support
2016-10-28 12:22:20 +00:00
Fix typo in MMDVM.ini [LCDproc] section and mend Conf.cpp accordingly
2016-10-29 10:28:56 +00:00
[LCDproc]
Initial LCDproc support
2016-10-28 12:22:20 +00:00
Address=localhost
Port=13666
#LocalPort=13667
LCDproc: Make dimming the status screen optional If you run another LCDproc client that doesn't dim the display when it displays its info, the display will effectively flash on and off (or dim/bright depending on your LCDd configuration) as it switches screens between MMDVMHost and the other client(s). Making the dimming optional and turning it off in the host stops this "annoyance".
2016-10-29 19:00:32 +00:00
DimOnIdle=0
Initial LCDproc support
2016-10-28 12:22:20 +00:00
DisplayClock=1
One last tweak for consistency!
2016-10-29 10:53:42 +00:00
UTC=0
Add MMDVM lock file based on an idea by DB1OFH.
2018-10-10 19:05:24 +00:00
More cleanups of the new lock file.
2018-10-11 11:14:47 +00:00
[Lock File]
Add MMDVM lock file based on an idea by DB1OFH.
2018-10-10 19:05:24 +00:00
Enable=0
File=/tmp/MMDVM_Active.lck
More cleanups of the new lock file.
2018-10-11 11:14:47 +00:00
Add remote control interface.
2019-01-07 11:03:37 +00:00
[Remote Control]
Enable=0
add IPv6 support for RemoteControl To specify IP(v4/v6) address for RemoteControl port, add Address parameter in [RemoteControl] section to MMDVM.ini. Different from other Address(es), the default IP address of RemoteControl is 127.0.0.1 for security.
2020-04-11 04:12:19 +00:00
Address=127.0.0.1
Add remote control interface.
2019-01-07 11:03:37 +00:00
Port=7642
Reference in a new issue Copy permalink