Crash_Override/FreeDATA
1
0
Fork 0
mirror of https://github.com/DJ2LS/FreeDATA synced 2024-05-14 08:04:33 +00:00
Code Issues Packages Projects Releases Wiki Activity
FreeDATA/test/001_highsnr_stdio_audio
History
drowe67 dee3f87ceb sound card input coded but not working in test_multimode_rx.py
2021-12-14 14:24:45 +10:30
..
README.md added cmd line arument to list audiodev by number, test_tx.py and test_rx.py working OK with virtual audio card, updated README.md with latest examples 2021-12-14 12:35:19 +10:30
test_multimode_rx.py sound card input coded but not working in test_multimode_rx.py 2021-12-14 14:24:45 +10:30
test_multimode_tx.py test_multimode_tx.py sounds OK through a sound card 2021-12-14 13:46:20 +10:30
test_rx.py sound card input coded but not working in test_multimode_rx.py 2021-12-14 14:24:45 +10:30
test_tx.py enable use of default sound card devnum 0 2021-12-14 13:42:47 +10:30
test_virtual.sh first attempt at test using virtual sound cards 2021-12-14 13:18:12 +10:30

README.md

001_HIGHSNR_STDIO_AUDIO TEST SUITE

  1. Install 
    sudo apt update
sudo apt upgrade
sudo apt install git cmake build-essential python3-pip portaudio19-dev python3-pyaudio
pip3 install crcengine
pip3 install threading
  2. Install codec2, and set up the libcodec2.so shared library path, for example 
    export LD_LIBRARY_PATH=${HOME}/codec2/build_linux/src

STDIO tests

Pipes are used to move audio samples from the Tx to Rx:

python3 test_tx.py --mode datac1 --delay 500 --frames 2 --bursts 1 | python3 test_rx.py --mode datac1 --frames 2 --bursts 1

AUDIO test via virtual audio devices

  1. Create virtual audio devices. Note: This command needs to be run again after every reboot

    sudo modprobe snd-aloop index=1,2 enable=1,1 pcm_substreams=1,1 id=CHAT1,CHAT2

  2. Check if devices have been created

     aplay -l

 Karte 0: Intel [HDA Intel], Gerät 0: Generic Analog [Generic Analog]
   Sub-Geräte: 1/1
   Sub-Gerät #0: subdevice #0
 Karte 1: CHAT1 [Loopback], Gerät 0: Loopback PCM [Loopback PCM]
   Sub-Geräte: 1/1
   Sub-Gerät #0: subdevice #0
 Karte 1: CHAT1 [Loopback], Gerät 1: Loopback PCM [Loopback PCM]
   Sub-Geräte: 1/1
   Sub-Gerät #0: subdevice #0
 Karte 2: CHAT2 [Loopback], Gerät 0: Loopback PCM [Loopback PCM]
   Sub-Geräte: 1/1
   Sub-Gerät #0: subdevice #0
 Karte 2: CHAT2 [Loopback], Gerät 1: Loopback PCM [Loopback PCM]
   Sub-Geräte: 1/1
   Sub-Gerät #0: subdevice #0

  3. Determine the audio device number you would like to use:

    python3 test_rx.py --list
<snip>
audiodev:  0 HDA Intel PCH: ALC269VC Analog (hw:0,0)
audiodev:  1 HDA Intel PCH: HDMI 0 (hw:0,3)
audiodev:  2 HDA Intel PCH: HDMI 1 (hw:0,7)
audiodev:  3 HDA Intel PCH: HDMI 2 (hw:0,8)
audiodev:  4 Loopback: PCM (hw:1,0)
audiodev:  5 Loopback: PCM (hw:1,1)
audiodev:  6 Loopback: PCM (hw:2,0)
audiodev:  7 Loopback: PCM (hw:2,1)

    In this case we choose audiodev 4 for the RX and 5 for the Tx.

  4. Start the Rx first, then Tx in separate consoles:

    python3 test_rx.py --mode datac0 --frames 2 --bursts 1 --audiodev 4 --debug
python3 test_tx.py --mode datac0 --frames 2 --bursts 1 --audiodev 5