FreeDATA/modem/static.py
2023-11-12 23:22:53 +01:00

193 lines
No EOL
4.8 KiB
Python

#!/usr/bin/env python3
# -*- coding: utf-8 -*-
"""
Created on Wed Dec 23 11:13:57 2020
@author: DJ2LS
Here we are saving application wide variables and stats, which have to be accessed everywhere.
"""
from dataclasses import dataclass, field
import subprocess
from enum import Enum
import threading
# CHANNEL_STATE = 'RECEIVING_SIGNALLING'
# disconnected, connecting, connected, disconnecting, failed
# ------- RX BUFFER
@dataclass
class ARQ:
bytes_per_minute: int = 0
arq_transmission_percent: int = 0
arq_compression_factor: int = 0
arq_speed_level: int = 0
arq_bits_per_second_burst: int = 0
arq_bits_per_second: int = 0
arq_seconds_until_finish: int = 0
arq_seconds_until_timeout: int = 0
rx_buffer_size: int = 16
rx_frame_buffer: bytes = b""
rx_burst_buffer = []
arq_session_state: str = "disconnected" # can be: disconnected, disconnecting, connected, connecting, failed
arq_session: bool = False
arq_state: bool = False
arq_state_event: threading.Event = field(default_factory=threading.Event)
# ARQ PROTOCOL VERSION
# v.5 - signalling frame uses datac0
# v.6 - signalling frame uses datac13
# v.7 - adjusting ARQ timeouts, not done yet
arq_protocol_version: int = 7
total_bytes: int = 0
speed_list = []
# set save to folder state for allowing downloading files to local file system
arq_save_to_folder: bool = False
bytes_per_minute_burst: int = 0
rx_msg_buffer = []
@dataclass
class AudioParam:
tx_audio_level: int = 0
rx_audio_level: int = 0
audio_input_devices = []
audio_output_devices = []
audio_input_device: int = -2
audio_output_device: int = -2
audio_record: bool = False
audio_record_file = ''
buffer_overflow_counter = [0, 0, 0, 0, 0]
audio_auto_tune: bool = False
audio_dbfs: int = 0
fft = []
enable_fft: bool = True
@dataclass
class Beacon:
beacon_state: bool = False
beacon_pause: bool = False
@dataclass
class Channel:
pass
@dataclass
class Daemon:
modemprocess: subprocess.Popen
rigctldprocess: subprocess.Popen
modemstarted: bool = False
rigctldstarted: bool = False
port: int = 3001
serial_devices = []
@dataclass
class HamlibParam:
alc: int = 0
hamlib_frequency: int = 0
hamlib_strength: int = 0
hamlib_radiocontrol: str = "disabled"
hamlib_rigctld_ip: str = "127.0.0.1"
hamlib_rigctld_port: str = "4532"
ptt_state: bool = False
hamlib_bandwidth: int = 0
hamlib_status: str = "unknown/disconnected"
hamlib_mode: str = ""
hamlib_rf: int = 0
@dataclass
class MeshParam:
routing_table = []
enable_protocol = False
@dataclass
class ModemParam:
tuning_range_fmin: float = -50.0
tuning_range_fmax: float = 50.0
channel_busy: bool = False
channel_busy_slot = [False] * 5
snr: float = 0
is_codec2_traffic: bool = False # true if we have codec2 signalling mode traffic on channel
frequency_offset: float = 0
tx_delay: int = 0 # delay in ms before sending modulation for triggering VOX for example or slow PTT radios
enable_scatter: bool = False
scatter = []
channel_busy_delay = 0
@dataclass
class Station:
mycallsign: bytes = b"AA0AA-0"
mycallsign_crc: bytes = b"A"
dxcallsign: bytes = b"ZZ9YY-0"
dxcallsign_crc: bytes = b"B"
mygrid: bytes = b""
dxgrid: bytes = b""
ssid_list = [] # ssid list we are responding to
@dataclass
class Statistics:
pass
@dataclass
class TCIParam:
ip: str = '127.0.0.1'
port: int = '9000'
@dataclass
class Modem:
version = "0.11.2-alpha.4"
host: str = "0.0.0.0"
port: int = 3000
SOCKET_TIMEOUT: int = 1 # seconds
modem_state: str = "IDLE"
enable_explorer = False
enable_stats = False
transmitting: bool = False
low_bandwidth_mode: bool = False
enable_fsk: bool = False
respond_to_cq: bool = True
respond_to_call: bool = True # respond to cq, ping, connection request, file request if not in session
heard_stations = []
listen: bool = True
enable_hmac: bool = True
transmit_morse_identifier: bool = False
# ------------
class FRAME_TYPE(Enum):
"""Lookup for frame types"""
BURST_01 = 10
BURST_02 = 11
BURST_03 = 12
BURST_04 = 13
# ...
BURST_51 = 50
BURST_ACK = 60
FR_ACK = 61
FR_REPEAT = 62
FR_NACK = 63
BURST_NACK = 64
MESH_BROADCAST = 100
MESH_SIGNALLING_PING = 101
MESH_SIGNALLING_PING_ACK = 102
CQ = 200
QRV = 201
PING = 210
PING_ACK = 211
IS_WRITING = 215
ARQ_SESSION_OPEN = 221
ARQ_SESSION_HB = 222
ARQ_SESSION_CLOSE = 223
ARQ_DC_OPEN_W = 225
ARQ_DC_OPEN_ACK_W = 226
ARQ_DC_OPEN_N = 227
ARQ_DC_OPEN_ACK_N = 228
ARQ_STOP = 249
BEACON = 250
FEC = 251
FEC_WAKEUP = 252
IDENT = 254
TEST_FRAME = 255