#!/usr/bin/env python3 # -*- coding: utf-8 -*- """ Created on Wed Dec 23 11:13:57 2020 @author: DJ2LS Here we are saving application wide variables and stats, which have to be accessed everywhere. """ from dataclasses import dataclass, field from typing import List import subprocess from enum import Enum # CHANNEL_STATE = 'RECEIVING_SIGNALLING' # disconnected, connecting, connected, disconnecting, failed # ------- RX BUFFER @dataclass class ARQ: bytes_per_minute: int = 0 arq_transmission_percent: int = 0 arq_compression_factor: int = 0 arq_speed_level: int = 0 arq_bits_per_second_burst: int = 0 arq_bits_per_second: int = 0 arq_seconds_until_finish: int = 0 arq_seconds_until_timeout: int = 0 rx_buffer_size: int = 16 rx_frame_buffer: bytes = b"" rx_burst_buffer = [] arq_session_state: str = "disconnected" # can be: disconnected, disconnecting, connected, connecting, failed arq_session: bool = False arq_state: bool = False # ARQ PROTOCOL VERSION # v.5 - signalling frame uses datac0 # v.6 - signalling frame uses datac13 # v.7 - adjusting ARQ timeouts, not done yet arq_protocol_version: int = 7 total_bytes: int = 0 speed_list = [] # set save to folder state for allowing downloading files to local file system arq_save_to_folder: bool = False bytes_per_minute_burst: int = 0 rx_msg_buffer = [] @dataclass class AudioParam: tx_audio_level: int = 50 audio_input_devices = [] audio_output_devices = [] audio_input_device: int = -2 audio_output_device: int = -2 audio_record: bool = False audio_record_file = '' buffer_overflow_counter = [0, 0, 0, 0, 0] audio_auto_tune: bool = False audio_dbfs: int = 0 fft = [] enable_fft: bool = True @dataclass class Beacon: beacon_state: bool = False beacon_pause: bool = False @dataclass class Channel: pass @dataclass class Daemon: modemprocess: subprocess.Popen rigctldprocess: subprocess.Popen modemstarted: bool = False rigctldstarted: bool = False port: int = 3001 serial_devices = [] @dataclass class HamlibParam: alc: int = 0 hamlib_frequency: int = 0 hamlib_strength: int = 0 hamlib_radiocontrol: str = "disabled" hamlib_rigctld_ip: str = "127.0.0.1" hamlib_rigctld_port: str = "4532" ptt_state: bool = False hamlib_bandwidth: int = 0 hamlib_status: str = "unknown/disconnected" hamlib_mode: str = "" hamlib_rf: int = 0 @dataclass class MeshParam: routing_table = [] enable_protocol = False @dataclass class ModemParam: tuning_range_fmin: float = -50.0 tuning_range_fmax: float = 50.0 channel_busy: bool = False channel_busy_slot = [False] * 5 snr: float = 0 is_codec2_traffic: bool = False # true if we have codec2 signalling mode traffic on channel frequency_offset: float = 0 tx_delay: int = 0 # delay in ms before sending modulation for triggering VOX for example or slow PTT radios enable_scatter: bool = False scatter = [] channel_busy_delay = 0 @dataclass class Station: mycallsign: bytes = b"AA0AA" mycallsign_crc: bytes = b"A" dxcallsign: bytes = b"ZZ9YY" dxcallsign_crc: bytes = b"A" mygrid: bytes = b"" dxgrid: bytes = b"" ssid_list = [] # ssid list we are responding to @dataclass class Statistics: pass @dataclass class TCIParam: ip: str = '127.0.0.1' port: int = '9000' @dataclass class Modem: version = "0.11.0-alpha.1-vuejs" host: str = "0.0.0.0" port: int = 3000 SOCKET_TIMEOUT: int = 1 # seconds modem_state: str = "IDLE" enable_explorer = False enable_stats = False transmitting: bool = False low_bandwidth_mode: bool = False enable_fsk: bool = False respond_to_cq: bool = True respond_to_call: bool = True # respond to cq, ping, connection request, file request if not in session heard_stations = [] listen: bool = True enable_hmac: bool = True # ------------ class FRAME_TYPE(Enum): """Lookup for frame types""" BURST_01 = 10 BURST_02 = 11 BURST_03 = 12 BURST_04 = 13 # ... BURST_51 = 50 BURST_ACK = 60 FR_ACK = 61 FR_REPEAT = 62 FR_NACK = 63 BURST_NACK = 64 MESH_BROADCAST = 100 MESH_SIGNALLING_PING = 101 MESH_SIGNALLING_PING_ACK = 102 CQ = 200 QRV = 201 PING = 210 PING_ACK = 211 IS_WRITING = 215 ARQ_SESSION_OPEN = 221 ARQ_SESSION_HB = 222 ARQ_SESSION_CLOSE = 223 ARQ_DC_OPEN_W = 225 ARQ_DC_OPEN_ACK_W = 226 ARQ_DC_OPEN_N = 227 ARQ_DC_OPEN_ACK_N = 228 ARQ_STOP = 249 BEACON = 250 FEC = 251 FEC_WAKEUP = 252 IDENT = 254 TEST_FRAME = 255