TNC will not utilize rig control and features will be
limited. While functional; it is recommended to configure
hamlib.
RigctldAddressPort
RigctldService
VOX: Use rig control mode 'none'
HAMLIB locally: configure in settings, then
start/stop service.
HAMLIB remotely: Enter IP/Port, connection
happens automatically.
My station
Updater
Audio level
S-Meter (dB)
dBFS (Audio Level)
Broadcasts
Heard stations
Time
Frequency
DXCall
DXGrid
Distance
Type
SNR (rx/dx)
Filetransfer
Time
DXCall
Filename
Transmit Files
DX Station
ACK0000 km0 dB
Mode
Mode
Frames
Help
Select your audio device for transmitting. It
must be using a sample rate of
48000Hz
Select your audio device for receiving. It
must be using a sample rate of
48000Hz
Help
.....
....
None/Vox
Select "None/Vox" if you want to use Vox for triggering PTT.
No connection to rigctld will be established. No frequency
information is availble.
Hamlib
Select "Hamlib" if you want to have more control over your
radio. Please ensure, rigctld is running.
Help
These settings will be saved automatically when changing.
Enter your callsign and SSID. Your callsign can have a length
of a maximum of 7 characters
Enter your position as a 4 or 6 digit grid square, also known
as a maidenhead locator. Six digits are recommended.
Help
Auto-Updater
The auto updater loads the latest version from Github and
installs it automatically. You can select the update channel
in settings. Once an update has been downlaoded, you need to
confirm the auto-installation and restart.
Alpha
Alpha releases contain the most recent changes, but there is a
high change, these versions are unstable. They might also
occur more often.
Beta
Beta releases are more stable than Alpha releases. They are a
good tradeoff between latest features and stability. They will
be updated less often. A beta release wasnt released yet.
Stable
Stable releases are the most stable versions. Until today we
didn't release a stable version, yet.
Help
Local / Remote switch. If the TNC is running on the same
computer as the GUI, select local. Otherwise choose remote and
enter the IP/Port of where the TNC is running.
tnc ip:
Remote IP of TNC. Port is port of daemon. The tnc port will
automatically adjusted. ( daemon port - 1 )
Help
Stop the current transmission or connection. Bursts will be
transmitted so the remote station is informed about our
disconnect attempt and freeing the remote station from any
unnecessary busy state.
Help
Start or stop the TNC service. The TNC daemon must be running
and will work whether the TNC is local or remote.
Help
.....
....
Help
.....
....
.....
....
.....
....
Help
.....
....
.....
....
.....
....
.....
....
.....
....
Help
.....
....
Audio tuning
Test-Frame
TX Level---
Settings
Please restart the TNC
after changing settings!
GUI theme
Waterfall theme
Received files folder
Update channel
Auto-start TNC/rigctld
Start on launch
Enable "is typing"
Additional broadcast burst
Allow requesting "user profile"
Allow requesting "shared folder"
Shared folder path
Rigctld command
Rigctld path
Rigctld server port
Radio model
Device port
Serial speed
Data bits
Stop bits
Serial handshake
PTT device port
PTT type
DCD
DTR
Rigctld custom arguments
TX delay in ms
Tuning rangefminfmax
Beacon interval
Enable waterfall data
Waterfall
Enable scatter diagram data
Scatter
Enable 563Hz only mode
563Hz
Respond to CQ
QRV
RX buffer size
Explorer publishing
Publish
Explorer stats publishing
Publish stats
Enable autotune
adjust ALC on TX
Enable FSK mode
not available, yet
These options may
not work and are for experienced users only!