diff --git a/gui/src/index.html b/gui/src/index.html index 28653a1f..18dc0c12 100644 --- a/gui/src/index.html +++ b/gui/src/index.html @@ -1808,8 +1808,8 @@
....
+This section is where you configure rig control method (none (VOX) or hamlib) for both GUI and TNC. For the best experience hamlib control is recommended.
Select "Hamlib" if you want to have more control over your - radio. Please ensure, rigctld is running. + radio. Define your hamlib settings in settings, and click the start button to start rigctld. You may use the 'PTT test' button to ensure rig control is working.
- Enter your callsign and SSID. Your callsign can have a maximum - length of 7 characters + Enter your callsign and SSID. Your callsign can have a maximum length + of 7 characters
@@ -1974,8 +1974,7 @@- Alpha releases are more frequent and contain the latest - features, but are likely to be unstable and introduce bugs. + Alpha releases are more frequent and contain the latest features, but are likely to be unstable and introduce bugs.
Beta releases are more stable than Alpha releases. They are a good tradeoff between latest features and stability. They will - be updated less often. A beta release has not been released - yet. + be updated less often. A beta release has not been released yet.
@@ -1994,8 +1992,7 @@- Stable releases are the most stable versions with no known - major issues. A stable release has not been released yet. + Stable releases are the most stable versions with no known major issues. A stable release has not been released yet.
....
++ -38 dBFS (Audio Level) +
+Represents the level of audio from transceiver. Excessively high levels will cause the TNC to believe the channel is constantly 'busy' and will not transmit.
+ -24 S-Meter (dBm) +
+Represents noise level of the channel from the transceiver. Requires hamlib rig control.
+Adjust volume level of outgoing audio to transceiver. For best results lower the level so that a minimum amount of ALC is used. Can be used in combination with rig's mic/input gain for furthrer refinement.
+Create a recording of current channel
+....
+Displays a waterfall for activity of current channel.
....
+Green when channel is open and changes to red to indicate there is activity on the channel.
....
+Changes to green when Codec2 data is detected on channel.
....
+Displays a plot of last decoded message. A constellation plot is a simple way to represent signal quality.
....
+Shows history of SNR and bit rate of messages.