diff --git a/README.md b/README.md
index eaa946c..7a154b4 100644
--- a/README.md
+++ b/README.md
@@ -87,48 +87,54 @@ Not tested yet.
 
 Easylink power/speaker connector:
 
-PIN 2 = Front Left +
-PIN 3 = Front Left -
-PIN 4 = Rear Left +
-PIN 5 = Read Left -
-PIN 11 = Front Right +
-PIN 12 = Front Right -
-PIN 13 = Rear Right +
-PIN 14 = Rear Right -
-PIN 19 = +12V permanent
-PIN 20 = Ground
+| PIN | Description |
+| -------- | ------- |
+| PIN 2 | Front Left + |
+| PIN 3 | Front Left - |
+| PIN 4 | Rear Left + |
+| PIN 5 | Read Left - |
+| PIN 11 | Front Right + |
+| PIN 12 | Front Right - |
+| PIN 13 | Rear Right + |
+| PIN 14 | Rear Right - |
+| PIN 19 | +12V permanent |
+| PIN 20 | Ground |
 
 Beware: Look at the numbers in the Easylink socket, my plug has wrong numbering !
 
 Easylink accessory connector:
 
-PIN 20 = EXT-CAN High (120 Ohms termination required)
-PIN 40 = EXT-CAN Low (120 Ohms termination required)
-PIN 19 = M-CAN High (Transreceiver and termination on these pins)
-PIN 39 = M-CAN Low (Transreceiver and termination on these pins)
-PIN 18 = M-CAN High (Termination here)
-PIN 38 = M-CAN Low (Termination here)
-
-PIN 1 = Mic 1 Signal
-PIN 2 = Mic 2 Signal
-PIN 21 = Mic Common Ground
-
-PIN 4 = Aux Detect (you can disable it within DDT)
-PIN 7 = Aux Line In Right
-PIN 8 = Aux Line In Left
-PIN 27 = Aux Ground
-
-PIN 12 = Ground for reversing camera
-PIN 13 = +6V for reversing camera (needs loaded with 300 Ohm to PIN 12, when using 12V camera)
-PIN 32 = CVBS differential + for reversing camera
-PIN 33 = CVBS differential - for reversing camera
+| PIN | Description |
+| -------- | ------- |
+| PIN 20 | EXT-CAN High (120 Ohms termination required) |
+| PIN 40 | EXT-CAN Low (120 Ohms termination required) |
+| PIN 19 | M-CAN High (Transreceiver and termination on these pins) |
+| PIN 39 | M-CAN Low (Transreceiver and termination on these pins) |
+| PIN 18 | M-CAN High (Termination here) |
+| PIN 38 | M-CAN Low (Termination here) |
+| | |
+| PIN 1 | Mic 1 Signal |
+| PIN 2 | Mic 2 Signal |
+| PIN 21 | Mic Common Ground |
+| | |
+| PIN 4 | Aux Detect (you can disable it within DDT) |
+| PIN 7 | Aux Line In Right |
+| PIN 8 | Aux Line In Left |
+| PIN 27 | Aux Ground |
+| | |
+| PIN 12 | Ground for reversing camera |
+| PIN 13 | +6V for reversing camera (needs loaded with 300 Ohm to PIN 12, when using 12V camera) |
+| PIN 32 | CVBS differential + for reversing camera |
+| PIN 33 | CVBS differential - for reversing camera |
 
 Touch display connector:
 
-PIN 15 = +12V permanent
-PIN 17 = Ground
-PIN 11 = M-CAN Low
-PIN 23 = M-CAN High
+| PIN | Description |
+| -------- | ------- |
+PIN 15 | +12V permanent |
+PIN 17 | Ground |
+PIN 11 | M-CAN Low |
+PIN 23 | M-CAN High |
 
 ## Sourcing hardware