diff --git a/User-Manual/Menus/Detailed-Control-Menu.md b/User-Manual/Menus/Detailed-Control-Menu.md
index 648a0f6..cf18b3a 100644
--- a/User-Manual/Menus/Detailed-Control-Menu.md
+++ b/User-Manual/Menus/Detailed-Control-Menu.md
@@ -18,12 +18,12 @@ With the heater idle, the menu will look something like below:
 Hold the Centre key for a second or so, the heater should then start and this is reflected in the status message:  
 ![ScreenDetailedStarting](uploads/da0867a16c5ff7e0d1304ffd97cc1e83/ScreenDetailedStarting.jpg)
 
-Shortly thereafter, the fan will begin spinning, and the glow plug will be gently raised in temperature as can be observed by the steady rise in power applied to it.
+Shortly thereafter, the fan will begin spinning, and the glow plug will be gently raised in temperature as can be observed by the steady rise in power applied to it.  
 Note that the fan icon rotates to indicate the fan is running, along with the measured RPM!:  
 ![ScreenDetailedGlowOn](uploads/48a4af091a68fe0cf4e3ddb23e508ea0/ScreenDetailedGlowOn.jpg)
 
-It takes about a minute for the glow plug to receive full power, at which point the pump then starts.
-The Pump being active is indicated by an animated rip, along with the actual pump rate:
+It takes about a minute for the glow plug to receive full power, at which point the pump then starts.  
+The Pump being active is indicated by an animated rip, along with the actual pump rate:  
 ![ScreenDetailedPumpOn](uploads/55de740283cf89c755995ef72fb98e7d/ScreenDetailedPumpOn.jpg)
 
 The pump starts at a slow speed and steadily rises, along with fan speed to get the heater ignited.