519 lines
24 KiB
C++
519 lines
24 KiB
C++
/*!
|
|
* @file Adafruit_SPITFT.h
|
|
*
|
|
* Part of Adafruit's GFX graphics library. Originally this class was
|
|
* written to handle a range of color TFT displays connected via SPI,
|
|
* but over time this library and some display-specific subclasses have
|
|
* mutated to include some color OLEDs as well as parallel-interfaced
|
|
* displays. The name's been kept for the sake of older code.
|
|
*
|
|
* Adafruit invests time and resources providing this open source code,
|
|
* please support Adafruit and open-source hardware by purchasing
|
|
* products from Adafruit!
|
|
*
|
|
* Written by Limor "ladyada" Fried for Adafruit Industries,
|
|
* with contributions from the open source community.
|
|
*
|
|
* BSD license, all text here must be included in any redistribution.
|
|
*/
|
|
|
|
#ifndef _ADAFRUIT_SPITFT_H_
|
|
#define _ADAFRUIT_SPITFT_H_
|
|
|
|
#if !defined(__AVR_ATtiny85__) // Not for ATtiny, at all
|
|
|
|
#include <SPI.h>
|
|
#include "Adafruit_GFX.h"
|
|
|
|
// HARDWARE CONFIG ---------------------------------------------------------
|
|
|
|
#if defined(__AVR__)
|
|
typedef uint8_t PORT_t; ///< PORT values are 8-bit
|
|
#define USE_FAST_PINIO ///< Use direct PORT register access
|
|
#elif defined(ARDUINO_STM32_FEATHER) // WICED
|
|
typedef class HardwareSPI SPIClass; ///< SPI is a bit odd on WICED
|
|
typedef uint32_t PORT_t; ///< PORT values are 32-bit
|
|
#elif defined(__arm__)
|
|
#if defined(ARDUINO_ARCH_SAMD)
|
|
// Adafruit M0, M4
|
|
typedef uint32_t PORT_t; ///< PORT values are 32-bit
|
|
#define USE_FAST_PINIO ///< Use direct PORT register access
|
|
#define HAS_PORT_SET_CLR ///< PORTs have set & clear registers
|
|
#elif defined(CORE_TEENSY)
|
|
// PJRC Teensy 4.x
|
|
#if defined(__IMXRT1052__) || defined(__IMXRT1062__) // Teensy 4.x
|
|
typedef uint32_t PORT_t; ///< PORT values are 32-bit
|
|
// PJRC Teensy 3.x
|
|
#else
|
|
typedef uint8_t PORT_t; ///< PORT values are 8-bit
|
|
#endif
|
|
#define USE_FAST_PINIO ///< Use direct PORT register access
|
|
#define HAS_PORT_SET_CLR ///< PORTs have set & clear registers
|
|
#else
|
|
// Arduino Due?
|
|
typedef uint32_t PORT_t; ///< PORT values are 32-bit
|
|
// USE_FAST_PINIO not available here (yet)...Due has a totally different
|
|
// GPIO register set and will require some changes elsewhere (e.g. in
|
|
// constructors especially).
|
|
#endif
|
|
#else // !ARM
|
|
// Probably ESP8266 or ESP32. USE_FAST_PINIO is not available here (yet)
|
|
// but don't worry about it too much...the digitalWrite() implementation
|
|
// on these platforms is reasonably efficient and already RAM-resident,
|
|
// only gotcha then is no parallel connection support for now.
|
|
typedef uint32_t PORT_t; ///< PORT values are 32-bit
|
|
#endif // end !ARM
|
|
typedef volatile PORT_t* PORTreg_t; ///< PORT register type
|
|
|
|
#if defined(__AVR__)
|
|
#define DEFAULT_SPI_FREQ 8000000L ///< Hardware SPI default speed
|
|
#else
|
|
#define DEFAULT_SPI_FREQ 16000000L ///< Hardware SPI default speed
|
|
#endif
|
|
|
|
#if defined(ADAFRUIT_PYPORTAL) || defined(ADAFRUIT_PYBADGE_M4_EXPRESS) || defined(ADAFRUIT_PYGAMER_M4_EXPRESS)
|
|
#define USE_SPI_DMA ///< Auto DMA if using PyPortal
|
|
#else
|
|
//#define USE_SPI_DMA ///< If set, use DMA if available
|
|
#endif
|
|
// Another "oops" name -- this now also handles parallel DMA.
|
|
// If DMA is enabled, Arduino sketch MUST #include <Adafruit_ZeroDMA.h>
|
|
// Estimated RAM usage:
|
|
// 4 bytes/pixel on display major axis + 8 bytes/pixel on minor axis,
|
|
// e.g. 320x240 pixels = 320 * 4 + 240 * 8 = 3,200 bytes.
|
|
|
|
#if !defined(ARDUINO_ARCH_SAMD)
|
|
#undef USE_SPI_DMA ///< DMA currently for SAMD chips only
|
|
#endif
|
|
|
|
#if defined(USE_SPI_DMA)
|
|
#pragma message ("GFX DMA IS ENABLED. HIGHLY EXPERIMENTAL.")
|
|
#include <Adafruit_ZeroDMA.h>
|
|
#endif
|
|
|
|
// This is kind of a kludge. Needed a way to disambiguate the software SPI
|
|
// and parallel constructors via their argument lists. Originally tried a
|
|
// bool as the first argument to the parallel constructor (specifying 8-bit
|
|
// vs 16-bit interface) but the compiler regards this as equivalent to an
|
|
// integer and thus still ambiguous. SO...the parallel constructor requires
|
|
// an enumerated type as the first argument: tft8 (for 8-bit parallel) or
|
|
// tft16 (for 16-bit)...even though 16-bit isn't fully implemented or tested
|
|
// and might never be, still needed that disambiguation from soft SPI.
|
|
enum tftBusWidth { tft8bitbus, tft16bitbus }; ///< For first arg to parallel constructor
|
|
|
|
// CLASS DEFINITION --------------------------------------------------------
|
|
|
|
/*!
|
|
@brief Adafruit_SPITFT is an intermediary class between Adafruit_GFX
|
|
and various hardware-specific subclasses for different displays.
|
|
It handles certain operations that are common to a range of
|
|
displays (address window, area fills, etc.). Originally these were
|
|
all color TFT displays interfaced via SPI, but it's since expanded
|
|
to include color OLEDs and parallel-interfaced TFTs. THE NAME HAS
|
|
BEEN KEPT TO AVOID BREAKING A LOT OF SUBCLASSES AND EXAMPLE CODE.
|
|
Many of the class member functions similarly live on with names
|
|
that don't necessarily accurately describe what they're doing,
|
|
again to avoid breaking a lot of other code. If in doubt, read
|
|
the comments.
|
|
*/
|
|
class Adafruit_SPITFT : public Adafruit_GFX {
|
|
|
|
public:
|
|
|
|
// CONSTRUCTORS --------------------------------------------------------
|
|
|
|
// Software SPI constructor: expects width & height (at default rotation
|
|
// setting 0), 4 signal pins (cs, dc, mosi, sclk), 2 optional pins
|
|
// (reset, miso). cs argument is required but can be -1 if unused --
|
|
// rather than moving it to the optional arguments, it was done this way
|
|
// to avoid breaking existing code (-1 option was a later addition).
|
|
Adafruit_SPITFT(uint16_t w, uint16_t h,
|
|
int8_t cs, int8_t dc, int8_t mosi, int8_t sck,
|
|
int8_t rst = -1, int8_t miso = -1);
|
|
|
|
// Hardware SPI constructor using the default SPI port: expects width &
|
|
// height (at default rotation setting 0), 2 signal pins (cs, dc),
|
|
// optional reset pin. cs is required but can be -1 if unused -- rather
|
|
// than moving it to the optional arguments, it was done this way to
|
|
// avoid breaking existing code (-1 option was a later addition).
|
|
Adafruit_SPITFT(uint16_t w, uint16_t h,
|
|
int8_t cs, int8_t dc, int8_t rst = -1);
|
|
|
|
#if !defined(ESP8266) // See notes in .cpp
|
|
// Hardware SPI constructor using an arbitrary SPI peripheral: expects
|
|
// width & height (rotation 0), SPIClass pointer, 2 signal pins (cs, dc)
|
|
// and optional reset pin. cs is required but can be -1 if unused.
|
|
Adafruit_SPITFT(uint16_t w, uint16_t h, SPIClass *spiClass,
|
|
int8_t cs, int8_t dc, int8_t rst = -1);
|
|
#endif // end !ESP8266
|
|
|
|
// Parallel constructor: expects width & height (rotation 0), flag
|
|
// indicating whether 16-bit (true) or 8-bit (false) interface, 3 signal
|
|
// pins (d0, wr, dc), 3 optional pins (cs, rst, rd). 16-bit parallel
|
|
// isn't even fully implemented but the 'wide' flag was added as a
|
|
// required argument to avoid ambiguity with other constructors.
|
|
Adafruit_SPITFT(uint16_t w, uint16_t h, tftBusWidth busWidth,
|
|
int8_t d0, int8_t wr, int8_t dc,
|
|
int8_t cs = -1, int8_t rst = -1, int8_t rd = -1);
|
|
|
|
// CLASS MEMBER FUNCTIONS ----------------------------------------------
|
|
|
|
// These first two functions MUST be declared by subclasses:
|
|
|
|
/*!
|
|
@brief Display-specific initialization function.
|
|
@param freq SPI frequency, in hz (or 0 for default or unused).
|
|
*/
|
|
virtual void begin(uint32_t freq) = 0;
|
|
|
|
/*!
|
|
@brief Set up the specific display hardware's "address window"
|
|
for subsequent pixel-pushing operations.
|
|
@param x Leftmost pixel of area to be drawn (MUST be within
|
|
display bounds at current rotation setting).
|
|
@param y Topmost pixel of area to be drawn (MUST be within
|
|
display bounds at current rotation setting).
|
|
@param w Width of area to be drawn, in pixels (MUST be >0 and,
|
|
added to x, within display bounds at current rotation).
|
|
@param h Height of area to be drawn, in pixels (MUST be >0 and,
|
|
added to x, within display bounds at current rotation).
|
|
*/
|
|
virtual void setAddrWindow(
|
|
uint16_t x, uint16_t y, uint16_t w, uint16_t h) = 0;
|
|
|
|
// Remaining functions do not need to be declared in subclasses
|
|
// unless they wish to provide hardware-specific optimizations.
|
|
// Brief comments here...documented more thoroughly in .cpp file.
|
|
|
|
// Subclass' begin() function invokes this to initialize hardware.
|
|
// freq=0 to use default SPI speed. spiMode must be one of the SPI_MODEn
|
|
// values defined in SPI.h, which are NOT the same as 0 for SPI_MODE0,
|
|
// 1 for SPI_MODE1, etc...use ONLY the SPI_MODEn defines! Only!
|
|
// Name is outdated (interface may be parallel) but for compatibility:
|
|
void initSPI(uint32_t freq = 0, uint8_t spiMode = SPI_MODE0);
|
|
// Chip select and/or hardware SPI transaction start as needed:
|
|
void startWrite(void);
|
|
// Chip deselect and/or hardware SPI transaction end as needed:
|
|
void endWrite(void);
|
|
void sendCommand(uint8_t commandByte, uint8_t *dataBytes = NULL, uint8_t numDataBytes = 0);
|
|
void sendCommand(uint8_t commandByte, const uint8_t *dataBytes, uint8_t numDataBytes);
|
|
uint8_t readcommand8(uint8_t commandByte, uint8_t index = 0);
|
|
|
|
// These functions require a chip-select and/or SPI transaction
|
|
// around them. Higher-level graphics primitives might start a
|
|
// single transaction and then make multiple calls to these functions
|
|
// (e.g. circle or text rendering might make repeated lines or rects)
|
|
// before ending the transaction. It's more efficient than starting a
|
|
// transaction every time.
|
|
void writePixel(int16_t x, int16_t y, uint16_t color);
|
|
void writePixels(uint16_t *colors, uint32_t len,
|
|
bool block=true, bool bigEndian=false);
|
|
void writeColor(uint16_t color, uint32_t len);
|
|
void writeFillRect(int16_t x, int16_t y, int16_t w, int16_t h,
|
|
uint16_t color);
|
|
void writeFastHLine(int16_t x, int16_t y, int16_t w,
|
|
uint16_t color);
|
|
void writeFastVLine(int16_t x, int16_t y, int16_t h,
|
|
uint16_t color);
|
|
// This is a new function, similar to writeFillRect() except that
|
|
// all arguments MUST be onscreen, sorted and clipped. If higher-level
|
|
// primitives can handle their own sorting/clipping, it avoids repeating
|
|
// such operations in the low-level code, making it potentially faster.
|
|
// CALLING THIS WITH UNCLIPPED OR NEGATIVE VALUES COULD BE DISASTROUS.
|
|
inline void writeFillRectPreclipped(int16_t x, int16_t y,
|
|
int16_t w, int16_t h, uint16_t color);
|
|
// Another new function, companion to the new non-blocking
|
|
// writePixels() variant.
|
|
void dmaWait(void);
|
|
|
|
|
|
// These functions are similar to the 'write' functions above, but with
|
|
// a chip-select and/or SPI transaction built-in. They're typically used
|
|
// solo -- that is, as graphics primitives in themselves, not invoked by
|
|
// higher-level primitives (which should use the functions above).
|
|
void drawPixel(int16_t x, int16_t y, uint16_t color);
|
|
void fillRect(int16_t x, int16_t y, int16_t w, int16_t h,
|
|
uint16_t color);
|
|
void drawFastHLine(int16_t x, int16_t y, int16_t w,
|
|
uint16_t color);
|
|
void drawFastVLine(int16_t x, int16_t y, int16_t h,
|
|
uint16_t color);
|
|
// A single-pixel push encapsulated in a transaction. I don't think
|
|
// this is used anymore (BMP demos might've used it?) but is provided
|
|
// for backward compatibility, consider it deprecated:
|
|
void pushColor(uint16_t color);
|
|
|
|
using Adafruit_GFX::drawRGBBitmap; // Check base class first
|
|
void drawRGBBitmap(int16_t x, int16_t y,
|
|
uint16_t *pcolors, int16_t w, int16_t h);
|
|
|
|
void invertDisplay(bool i);
|
|
uint16_t color565(uint8_t r, uint8_t g, uint8_t b);
|
|
|
|
// Despite parallel additions, function names kept for compatibility:
|
|
void spiWrite(uint8_t b); // Write single byte as DATA
|
|
void writeCommand(uint8_t cmd); // Write single byte as COMMAND
|
|
uint8_t spiRead(void); // Read single byte of data
|
|
|
|
// Most of these low-level functions were formerly macros in
|
|
// Adafruit_SPITFT_Macros.h. Some have been made into inline functions
|
|
// to avoid macro mishaps. Despite the addition of code for a parallel
|
|
// display interface, the names have been kept for backward
|
|
// compatibility (some subclasses may be invoking these):
|
|
void SPI_WRITE16(uint16_t w); // Not inline
|
|
void SPI_WRITE32(uint32_t l); // Not inline
|
|
// Old code had both a spiWrite16() function and SPI_WRITE16 macro
|
|
// in addition to the SPI_WRITE32 macro. The latter two have been
|
|
// made into functions here, and spiWrite16() removed (use SPI_WRITE16()
|
|
// instead). It looks like most subclasses had gotten comfortable with
|
|
// SPI_WRITE16 and SPI_WRITE32 anyway so those names were kept rather
|
|
// than the less-obnoxious camelcase variants, oh well.
|
|
|
|
// Placing these functions entirely in the class definition inlines
|
|
// them implicitly them while allowing their use in other code:
|
|
|
|
/*!
|
|
@brief Set the chip-select line HIGH. Does NOT check whether CS pin
|
|
is set (>=0), that should be handled in calling function.
|
|
Despite function name, this is used even if the display
|
|
connection is parallel.
|
|
*/
|
|
void SPI_CS_HIGH(void) {
|
|
#if defined(USE_FAST_PINIO)
|
|
#if defined(HAS_PORT_SET_CLR)
|
|
#if defined(KINETISK)
|
|
*csPortSet = 1;
|
|
#else // !KINETISK
|
|
*csPortSet = csPinMask;
|
|
#endif // end !KINETISK
|
|
#else // !HAS_PORT_SET_CLR
|
|
*csPort |= csPinMaskSet;
|
|
#endif // end !HAS_PORT_SET_CLR
|
|
#else // !USE_FAST_PINIO
|
|
digitalWrite(_cs, HIGH);
|
|
#endif // end !USE_FAST_PINIO
|
|
}
|
|
|
|
/*!
|
|
@brief Set the chip-select line LOW. Does NOT check whether CS pin
|
|
is set (>=0), that should be handled in calling function.
|
|
Despite function name, this is used even if the display
|
|
connection is parallel.
|
|
*/
|
|
void SPI_CS_LOW(void) {
|
|
#if defined(USE_FAST_PINIO)
|
|
#if defined(HAS_PORT_SET_CLR)
|
|
#if defined(KINETISK)
|
|
*csPortClr = 1;
|
|
#else // !KINETISK
|
|
*csPortClr = csPinMask;
|
|
#endif // end !KINETISK
|
|
#else // !HAS_PORT_SET_CLR
|
|
*csPort &= csPinMaskClr;
|
|
#endif // end !HAS_PORT_SET_CLR
|
|
#else // !USE_FAST_PINIO
|
|
digitalWrite(_cs, LOW);
|
|
#endif // end !USE_FAST_PINIO
|
|
}
|
|
|
|
/*!
|
|
@brief Set the data/command line HIGH (data mode).
|
|
*/
|
|
void SPI_DC_HIGH(void) {
|
|
#if defined(USE_FAST_PINIO)
|
|
#if defined(HAS_PORT_SET_CLR)
|
|
#if defined(KINETISK)
|
|
*dcPortSet = 1;
|
|
#else // !KINETISK
|
|
*dcPortSet = dcPinMask;
|
|
#endif // end !KINETISK
|
|
#else // !HAS_PORT_SET_CLR
|
|
*dcPort |= dcPinMaskSet;
|
|
#endif // end !HAS_PORT_SET_CLR
|
|
#else // !USE_FAST_PINIO
|
|
digitalWrite(_dc, HIGH);
|
|
#endif // end !USE_FAST_PINIO
|
|
}
|
|
|
|
/*!
|
|
@brief Set the data/command line LOW (command mode).
|
|
*/
|
|
void SPI_DC_LOW(void) {
|
|
#if defined(USE_FAST_PINIO)
|
|
#if defined(HAS_PORT_SET_CLR)
|
|
#if defined(KINETISK)
|
|
*dcPortClr = 1;
|
|
#else // !KINETISK
|
|
*dcPortClr = dcPinMask;
|
|
#endif // end !KINETISK
|
|
#else // !HAS_PORT_SET_CLR
|
|
*dcPort &= dcPinMaskClr;
|
|
#endif // end !HAS_PORT_SET_CLR
|
|
#else // !USE_FAST_PINIO
|
|
digitalWrite(_dc, LOW);
|
|
#endif // end !USE_FAST_PINIO
|
|
}
|
|
|
|
protected:
|
|
|
|
// A few more low-level member functions -- some may have previously
|
|
// been macros. Shouldn't have a need to access these externally, so
|
|
// they've been moved to the protected section. Additionally, they're
|
|
// declared inline here and the code is in the .cpp file, since outside
|
|
// code doesn't need to see these.
|
|
inline void SPI_MOSI_HIGH(void);
|
|
inline void SPI_MOSI_LOW(void);
|
|
inline void SPI_SCK_HIGH(void);
|
|
inline void SPI_SCK_LOW(void);
|
|
inline bool SPI_MISO_READ(void);
|
|
inline void SPI_BEGIN_TRANSACTION(void);
|
|
inline void SPI_END_TRANSACTION(void);
|
|
inline void TFT_WR_STROBE(void); // Parallel interface write strobe
|
|
inline void TFT_RD_HIGH(void); // Parallel interface read high
|
|
inline void TFT_RD_LOW(void); // Parallel interface read low
|
|
|
|
// CLASS INSTANCE VARIABLES --------------------------------------------
|
|
|
|
// Here be dragons! There's a big union of three structures here --
|
|
// one each for hardware SPI, software (bitbang) SPI, and parallel
|
|
// interfaces. This is to save some memory, since a display's connection
|
|
// will be only one of these. The order of some things is a little weird
|
|
// in an attempt to get values to align and pack better in RAM.
|
|
|
|
#if defined(USE_FAST_PINIO)
|
|
#if defined(HAS_PORT_SET_CLR)
|
|
PORTreg_t csPortSet; ///< PORT register for chip select SET
|
|
PORTreg_t csPortClr; ///< PORT register for chip select CLEAR
|
|
PORTreg_t dcPortSet; ///< PORT register for data/command SET
|
|
PORTreg_t dcPortClr; ///< PORT register for data/command CLEAR
|
|
#else // !HAS_PORT_SET_CLR
|
|
PORTreg_t csPort; ///< PORT register for chip select
|
|
PORTreg_t dcPort; ///< PORT register for data/command
|
|
#endif // end HAS_PORT_SET_CLR
|
|
#endif // end USE_FAST_PINIO
|
|
#if defined(__cplusplus) && (__cplusplus >= 201100)
|
|
union {
|
|
#endif
|
|
struct { // Values specific to HARDWARE SPI:
|
|
SPIClass *_spi; ///< SPI class pointer
|
|
#if defined(SPI_HAS_TRANSACTION)
|
|
SPISettings settings; ///< SPI transaction settings
|
|
#else
|
|
uint32_t _freq; ///< SPI bitrate (if no SPI transactions)
|
|
#endif
|
|
uint32_t _mode; ///< SPI data mode (transactions or no)
|
|
} hwspi; ///< Hardware SPI values
|
|
struct { // Values specific to SOFTWARE SPI:
|
|
#if defined(USE_FAST_PINIO)
|
|
PORTreg_t misoPort; ///< PORT (PIN) register for MISO
|
|
#if defined(HAS_PORT_SET_CLR)
|
|
PORTreg_t mosiPortSet; ///< PORT register for MOSI SET
|
|
PORTreg_t mosiPortClr; ///< PORT register for MOSI CLEAR
|
|
PORTreg_t sckPortSet; ///< PORT register for SCK SET
|
|
PORTreg_t sckPortClr; ///< PORT register for SCK CLEAR
|
|
#if !defined(KINETISK)
|
|
PORT_t mosiPinMask; ///< Bitmask for MOSI
|
|
PORT_t sckPinMask; ///< Bitmask for SCK
|
|
#endif // end !KINETISK
|
|
#else // !HAS_PORT_SET_CLR
|
|
PORTreg_t mosiPort; ///< PORT register for MOSI
|
|
PORTreg_t sckPort; ///< PORT register for SCK
|
|
PORT_t mosiPinMaskSet; ///< Bitmask for MOSI SET (OR)
|
|
PORT_t mosiPinMaskClr; ///< Bitmask for MOSI CLEAR (AND)
|
|
PORT_t sckPinMaskSet; ///< Bitmask for SCK SET (OR bitmask)
|
|
PORT_t sckPinMaskClr; ///< Bitmask for SCK CLEAR (AND)
|
|
#endif // end HAS_PORT_SET_CLR
|
|
#if !defined(KINETISK)
|
|
PORT_t misoPinMask; ///< Bitmask for MISO
|
|
#endif // end !KINETISK
|
|
#endif // end USE_FAST_PINIO
|
|
int8_t _mosi; ///< MOSI pin #
|
|
int8_t _miso; ///< MISO pin #
|
|
int8_t _sck; ///< SCK pin #
|
|
} swspi; ///< Software SPI values
|
|
struct { // Values specific to 8-bit parallel:
|
|
#if defined(USE_FAST_PINIO)
|
|
|
|
#if defined(__IMXRT1052__) || defined(__IMXRT1062__) // Teensy 4.x
|
|
volatile uint32_t *writePort; ///< PORT register for DATA WRITE
|
|
volatile uint32_t *readPort; ///< PORT (PIN) register for DATA READ
|
|
#else
|
|
volatile uint8_t *writePort; ///< PORT register for DATA WRITE
|
|
volatile uint8_t *readPort; ///< PORT (PIN) register for DATA READ
|
|
#endif
|
|
#if defined(HAS_PORT_SET_CLR)
|
|
// Port direction register pointers are always 8-bit regardless of
|
|
// PORTreg_t -- even if 32-bit port, we modify a byte-aligned 8 bits.
|
|
#if defined(__IMXRT1052__) || defined(__IMXRT1062__) // Teensy 4.x
|
|
volatile uint32_t *dirSet; ///< PORT byte data direction SET
|
|
volatile uint32_t *dirClr; ///< PORT byte data direction CLEAR
|
|
#else
|
|
volatile uint8_t *dirSet; ///< PORT byte data direction SET
|
|
volatile uint8_t *dirClr; ///< PORT byte data direction CLEAR
|
|
#endif
|
|
PORTreg_t wrPortSet; ///< PORT register for write strobe SET
|
|
PORTreg_t wrPortClr; ///< PORT register for write strobe CLEAR
|
|
PORTreg_t rdPortSet; ///< PORT register for read strobe SET
|
|
PORTreg_t rdPortClr; ///< PORT register for read strobe CLEAR
|
|
#if !defined(KINETISK)
|
|
PORT_t wrPinMask; ///< Bitmask for write strobe
|
|
#endif // end !KINETISK
|
|
PORT_t rdPinMask; ///< Bitmask for read strobe
|
|
#else // !HAS_PORT_SET_CLR
|
|
// Port direction register pointer is always 8-bit regardless of
|
|
// PORTreg_t -- even if 32-bit port, we modify a byte-aligned 8 bits.
|
|
volatile uint8_t *portDir; ///< PORT direction register
|
|
PORTreg_t wrPort; ///< PORT register for write strobe
|
|
PORTreg_t rdPort; ///< PORT register for read strobe
|
|
PORT_t wrPinMaskSet; ///< Bitmask for write strobe SET (OR)
|
|
PORT_t wrPinMaskClr; ///< Bitmask for write strobe CLEAR (AND)
|
|
PORT_t rdPinMaskSet; ///< Bitmask for read strobe SET (OR)
|
|
PORT_t rdPinMaskClr; ///< Bitmask for read strobe CLEAR (AND)
|
|
#endif // end HAS_PORT_SET_CLR
|
|
#endif // end USE_FAST_PINIO
|
|
int8_t _d0; ///< Data pin 0 #
|
|
int8_t _wr; ///< Write strobe pin #
|
|
int8_t _rd; ///< Read strobe pin # (or -1)
|
|
bool wide = 0; ///< If true, is 16-bit interface
|
|
} tft8; ///< Parallel interface settings
|
|
#if defined(__cplusplus) && (__cplusplus >= 201100)
|
|
}; ///< Only one interface is active
|
|
#endif
|
|
#if defined(USE_SPI_DMA) // Used by hardware SPI and tft8
|
|
Adafruit_ZeroDMA dma; ///< DMA instance
|
|
DmacDescriptor *dptr = NULL; ///< 1st descriptor
|
|
DmacDescriptor *descriptor = NULL; ///< Allocated descriptor list
|
|
uint16_t *pixelBuf[2]; ///< Working buffers
|
|
uint16_t maxFillLen; ///< Max pixels per DMA xfer
|
|
uint16_t lastFillColor = 0; ///< Last color used w/fill
|
|
uint32_t lastFillLen = 0; ///< # of pixels w/last fill
|
|
uint8_t onePixelBuf; ///< For hi==lo fill
|
|
#endif
|
|
#if defined(USE_FAST_PINIO)
|
|
#if defined(HAS_PORT_SET_CLR)
|
|
#if !defined(KINETISK)
|
|
PORT_t csPinMask; ///< Bitmask for chip select
|
|
PORT_t dcPinMask; ///< Bitmask for data/command
|
|
#endif // end !KINETISK
|
|
#else // !HAS_PORT_SET_CLR
|
|
PORT_t csPinMaskSet; ///< Bitmask for chip select SET (OR)
|
|
PORT_t csPinMaskClr; ///< Bitmask for chip select CLEAR (AND)
|
|
PORT_t dcPinMaskSet; ///< Bitmask for data/command SET (OR)
|
|
PORT_t dcPinMaskClr; ///< Bitmask for data/command CLEAR (AND)
|
|
#endif // end HAS_PORT_SET_CLR
|
|
#endif // end USE_FAST_PINIO
|
|
uint8_t connection; ///< TFT_HARD_SPI, TFT_SOFT_SPI, etc.
|
|
int8_t _rst; ///< Reset pin # (or -1)
|
|
int8_t _cs; ///< Chip select pin # (or -1)
|
|
int8_t _dc; ///< Data/command pin #
|
|
|
|
int16_t _xstart = 0; ///< Internal framebuffer X offset
|
|
int16_t _ystart = 0; ///< Internal framebuffer Y offset
|
|
uint8_t invertOnCommand = 0; ///< Command to enable invert mode
|
|
uint8_t invertOffCommand = 0; ///< Command to disable invert mode
|
|
|
|
uint32_t _freq = 0; ///< Dummy var to keep subclasses happy
|
|
};
|
|
|
|
#endif // end __AVR_ATtiny85__
|
|
#endif // end _ADAFRUIT_SPITFT_H_
|