416 lines
13 KiB
C++
416 lines
13 KiB
C++
/*
|
|
* This file is part of the "bluetoothheater" distribution
|
|
* (https://gitlab.com/mrjones.id.au/bluetoothheater)
|
|
*
|
|
* Copyright (C) 2018 Ray Jones <ray@mrjones.id.au>
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
#include "128x64OLED.h"
|
|
#include "GPIOSetupScreen.h"
|
|
#include "KeyPad.h"
|
|
#include "../Utility/NVStorage.h"
|
|
#include "../Utility/BTC_GPIO.h"
|
|
#include "fonts/Icons.h"
|
|
#include "../Utility/BoardDetect.h"
|
|
|
|
extern CGPIOout GPIOout;
|
|
extern CGPIOin GPIOin;
|
|
extern CGPIOalg GPIOalg;
|
|
|
|
///////////////////////////////////////////////////////////////////////////
|
|
//
|
|
// CGPIOSetupScreen
|
|
//
|
|
// This screen provides control over GPIO features
|
|
//
|
|
///////////////////////////////////////////////////////////////////////////
|
|
|
|
static const int Line3 = 14;
|
|
static const int Line2 = 27;
|
|
static const int Line1 = 40;
|
|
static const int Column1 = 19;
|
|
static const int Column2 = 88;
|
|
|
|
CGPIOSetupScreen::CGPIOSetupScreen(C128x64_OLED& display, CScreenManager& mgr) : CPasswordScreen(display, mgr)
|
|
{
|
|
_initUI();
|
|
_GPIOparams.in1Mode = CGPIOin1::Disabled;
|
|
_GPIOparams.in2Mode = CGPIOin2::Disabled;
|
|
_GPIOparams.out1Mode = CGPIOout1::Disabled;
|
|
_GPIOparams.out2Mode = CGPIOout2::Disabled;
|
|
_GPIOparams.algMode = CGPIOalg::Disabled;
|
|
_ExtHold = 0;
|
|
}
|
|
|
|
void
|
|
CGPIOSetupScreen::onSelect()
|
|
{
|
|
CPasswordScreen::onSelect();
|
|
_initUI();
|
|
_GPIOparams = NVstore.getUserSettings().GPIO;
|
|
_ExtHold = NVstore.getUserSettings().ExtThermoTimeout;
|
|
}
|
|
|
|
void
|
|
CGPIOSetupScreen::_initUI()
|
|
{
|
|
_rowSel = 0;
|
|
_animateCount = 0;
|
|
}
|
|
|
|
bool
|
|
CGPIOSetupScreen::show()
|
|
{
|
|
_display.clearDisplay();
|
|
|
|
static bool animated = false;
|
|
animated = !animated;
|
|
|
|
if(!CPasswordScreen::show()) { // for showing "saving settings"
|
|
|
|
if(_rowSel == 10) {
|
|
_showConfirmMessage();
|
|
}
|
|
else {
|
|
_showTitle("GPIO Configuration");
|
|
_drawBitmap(0, Line3, InputIconInfo);
|
|
_drawBitmap(11, Line3, _1IconInfo);
|
|
{
|
|
const char* msgText = NULL;
|
|
switch(_GPIOparams.in1Mode) {
|
|
case CGPIOin1::Disabled: msgText = " --- "; break;
|
|
case CGPIOin1::Start: msgText = "Start"; break;
|
|
case CGPIOin1::Run: msgText = "Run "; break;
|
|
case CGPIOin1::StartStop: msgText = animated ? "Start" : "Stop "; break;
|
|
case CGPIOin1::Stop: msgText = "Stop "; break;
|
|
}
|
|
if(msgText)
|
|
_printMenuText(Column1, Line3, msgText, _rowSel == 4);
|
|
}
|
|
_drawBitmap(0, Line2, InputIconInfo);
|
|
_drawBitmap(11, Line2, _2IconInfo);
|
|
{
|
|
const char* msgText = NULL;
|
|
switch(_GPIOparams.in2Mode) {
|
|
case CGPIOin2::Disabled: msgText = " --- "; break;
|
|
case CGPIOin2::Stop: msgText = "Stop "; break;
|
|
case CGPIOin2::Thermostat: msgText = "\352T"; break;
|
|
}
|
|
if(msgText)
|
|
_printMenuText(Column1, Line2, msgText, _rowSel == 2);
|
|
|
|
if(_GPIOparams.in2Mode == CGPIOin2::Thermostat) {
|
|
_drawBitmap(Column1 + 13, Line2-2, TimerIconInfo);
|
|
const char* modeStr = "No";
|
|
switch(_ExtHold) {
|
|
case 60000: modeStr = "1m"; break;
|
|
case 120000: modeStr = "2m"; break;
|
|
case 300000: modeStr = "5m"; break;
|
|
case 600000: modeStr = "10m"; break;
|
|
case 900000: modeStr = "15m"; break;
|
|
case 1200000: modeStr = "20m"; break;
|
|
case 1800000: modeStr = "30m"; break;
|
|
case 3600000: modeStr = "1hr"; break;
|
|
}
|
|
_printMenuText(Column1 + 29, Line2, modeStr, _rowSel == 3);
|
|
}
|
|
}
|
|
|
|
_drawBitmap(70, Line3, OutputIconInfo);
|
|
_drawBitmap(80, Line3, _1IconInfo);
|
|
{
|
|
const char* msgText = NULL;
|
|
switch(_GPIOparams.out1Mode) {
|
|
case CGPIOout1::Disabled: msgText = "---"; break;
|
|
case CGPIOout1::Status: msgText = "Status"; break;
|
|
case CGPIOout1::User: msgText = "User"; break;
|
|
}
|
|
if(msgText)
|
|
_printMenuText(Column2, Line3, msgText, _rowSel == 6);
|
|
}
|
|
_drawBitmap(70, Line2, OutputIconInfo);
|
|
_drawBitmap(80, Line2, _2IconInfo);
|
|
{
|
|
const char* msgText = NULL;
|
|
switch(_GPIOparams.out2Mode) {
|
|
case CGPIOout2::Disabled: msgText = "---"; break;
|
|
case CGPIOout2::User: msgText = "User"; break;
|
|
}
|
|
if(msgText)
|
|
_printMenuText(Column2, Line2, msgText, _rowSel == 5);
|
|
}
|
|
|
|
if(getBoardRevision() == BRD_V2_FULLGPIO || getBoardRevision() == BRD_V1_FULLGPIO) {
|
|
_drawBitmap(0, Line1-1, algIconInfo);
|
|
const char* msgText = NULL;
|
|
switch(_GPIOparams.algMode) {
|
|
case CGPIOalg::Disabled: msgText = "Disabled"; break;
|
|
case CGPIOalg::HeatDemand: msgText = "Enabled"; break;
|
|
}
|
|
if(msgText)
|
|
_printMenuText(23, Line1, msgText, _rowSel == 1);
|
|
}
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
bool
|
|
CGPIOSetupScreen::animate()
|
|
{
|
|
CPasswordScreen::animate();
|
|
|
|
if(!CPasswordScreen::_busy()) {
|
|
if(_rowSel != 10) {
|
|
int yPos = 53;
|
|
int xPos = _display.xCentre();
|
|
const char* pMsg = NULL;
|
|
switch(_rowSel) {
|
|
case 0:
|
|
_printMenuText(xPos, yPos, " \021 \030Edit Exit \020 ", true, eCentreJustify);
|
|
break;
|
|
case 1:
|
|
_display.drawFastHLine(0, 52, 128, WHITE);
|
|
switch(_GPIOparams.algMode) {
|
|
case CGPIOalg::Disabled: pMsg = " Analogue input is ignored. "; break;
|
|
case CGPIOalg::HeatDemand: pMsg = " Input 1 enables reading of analogue input to set temperature. "; break;
|
|
}
|
|
if(pMsg)
|
|
_scrollMessage(56, pMsg, _scrollChar);
|
|
break;
|
|
|
|
case 2:
|
|
_display.drawFastHLine(0, 52, 128, WHITE);
|
|
switch(_GPIOparams.in2Mode) {
|
|
case CGPIOin2::Disabled: pMsg = " Input 2: DISABLED. "; break;
|
|
case CGPIOin2::Stop: pMsg = " Input 2: Stops heater upon closure. "; break;
|
|
case CGPIOin2::Thermostat: pMsg = " Input 2: External thermostat. Max fuel when closed, min fuel when open. "; break;
|
|
}
|
|
if(pMsg)
|
|
_scrollMessage(56, pMsg, _scrollChar);
|
|
break;
|
|
case 3:
|
|
_display.drawFastHLine(0, 52, 128, WHITE);
|
|
pMsg = " Input 2: External thermostat heater control. Start heater upon closure, stop after open for specified period. ";
|
|
_scrollMessage(56, pMsg, _scrollChar);
|
|
break;
|
|
case 4:
|
|
_display.drawFastHLine(0, 52, 128, WHITE);
|
|
switch(_GPIOparams.in1Mode) {
|
|
case CGPIOin1::Disabled: pMsg = " Input 1: DISABLED. "; break;
|
|
case CGPIOin1::Start: pMsg = " Input 1: Starts heater upon closure. "; break;
|
|
case CGPIOin1::Run: pMsg = " Input 1: Starts heater when held closed, stops when opened. "; break;
|
|
case CGPIOin1::StartStop: pMsg = " Input 1: Starts or Stops heater upon closure. "; break;
|
|
case CGPIOin1::Stop: pMsg = " Input 1: Stops heater upon closure. "; break;
|
|
}
|
|
if(pMsg)
|
|
_scrollMessage(56, pMsg, _scrollChar);
|
|
break;
|
|
|
|
case 5:
|
|
_display.drawFastHLine(0, 52, 128, WHITE);
|
|
switch(_GPIOparams.out2Mode) {
|
|
case CGPIOout2::Disabled: pMsg = " Output 2: DISABLED. "; break;
|
|
case CGPIOout2::User: pMsg = " Output 2: User controlled. "; break;
|
|
}
|
|
if(pMsg)
|
|
_scrollMessage(56, pMsg, _scrollChar);
|
|
break;
|
|
case 6:
|
|
_display.drawFastHLine(0, 52, 128, WHITE);
|
|
switch(_GPIOparams.out1Mode) {
|
|
case CGPIOout1::Disabled: pMsg = " Output 1: DISABLED. "; break;
|
|
case CGPIOout1::Status: pMsg = " Output 1: LED status indicator. "; break;
|
|
case CGPIOout1::User: pMsg = " Output 1: User controlled. "; break;
|
|
}
|
|
if(pMsg)
|
|
_scrollMessage(56, pMsg, _scrollChar);
|
|
break;
|
|
}
|
|
return true;
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
bool
|
|
CGPIOSetupScreen::keyHandler(uint8_t event)
|
|
{
|
|
sUserSettings us;
|
|
if(event & keyPressed) {
|
|
// press LEFT to select previous screen
|
|
if(event & key_Left) {
|
|
switch(_rowSel) {
|
|
case 0:
|
|
_ScreenManager.prevMenu();
|
|
break;
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
case 6:
|
|
_scrollChar = 0;
|
|
_adjust(-1);
|
|
break;
|
|
case 10:
|
|
_rowSel = 0; // abort save
|
|
break;
|
|
}
|
|
}
|
|
// press RIGHT to select next screen
|
|
if(event & key_Right) {
|
|
switch(_rowSel) {
|
|
case 0:
|
|
_ScreenManager.nextMenu();
|
|
break;
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
case 6:
|
|
_scrollChar = 0;
|
|
_adjust(+1);
|
|
break;
|
|
case 10:
|
|
_rowSel = 0; // abort save
|
|
break;
|
|
}
|
|
}
|
|
if(event & key_Down) {
|
|
if(_rowSel == 10) {
|
|
_rowSel = 0; // abort save
|
|
}
|
|
else {
|
|
_scrollChar = 0;
|
|
_rowSel--;
|
|
if((_rowSel == 3) && (_GPIOparams.in2Mode != CGPIOin2::Thermostat))
|
|
_rowSel--; // force skip if not set to external thermostat
|
|
if((_rowSel == 1) && ((getBoardRevision() == BRD_V2_GPIO_NOALG) || (getBoardRevision() == BRD_V3_GPIO_NOALG))) // GPIO but NO analog support
|
|
_rowSel--; // force skip if analog input is not supported by PCB
|
|
LOWERLIMIT(_rowSel, 0);
|
|
}
|
|
}
|
|
// UP press
|
|
if(event & key_Up) {
|
|
switch(_rowSel) {
|
|
case 0:
|
|
if((getBoardRevision() == BRD_V2_GPIO_NOALG) || (getBoardRevision() == BRD_V3_GPIO_NOALG)) // GPIO but NO Analog support
|
|
_rowSel++; // force skip if analog input is not supported by PCB
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
_scrollChar = 0;
|
|
_rowSel++;
|
|
if((_rowSel == 3) && (_GPIOparams.in2Mode != CGPIOin2::Thermostat))
|
|
_rowSel++; // force skip if not set to external thermostat
|
|
UPPERLIMIT(_rowSel, 6);
|
|
break;
|
|
case 10: // confirmed save
|
|
_enableStoringMessage();
|
|
us = NVstore.getUserSettings();
|
|
us.GPIO = _GPIOparams;
|
|
us.ExtThermoTimeout = _ExtHold;
|
|
NVstore.setUserSettings(us);
|
|
saveNV();
|
|
|
|
setupGPIO();
|
|
|
|
_rowSel = 0;
|
|
break;
|
|
}
|
|
}
|
|
// CENTRE press
|
|
if(event & key_Centre) {
|
|
switch(_rowSel) {
|
|
case 0:
|
|
_ScreenManager.selectMenu(CScreenManager::RootMenuLoop); // force return to main menu
|
|
break;
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
case 6:
|
|
_rowSel = 10;
|
|
break;
|
|
}
|
|
}
|
|
_ScreenManager.reqUpdate();
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
void
|
|
CGPIOSetupScreen::_adjust(int dir)
|
|
{
|
|
int tVal;
|
|
switch(_rowSel) {
|
|
case 1: // analogue mode
|
|
tVal = _GPIOparams.algMode;
|
|
tVal += dir;
|
|
WRAPLIMITS(tVal, 0, 1);
|
|
_GPIOparams.algMode = (CGPIOalg::Modes)tVal;
|
|
break;
|
|
case 2:
|
|
tVal = _GPIOparams.in2Mode;
|
|
tVal += dir;
|
|
WRAPLIMITS(tVal, 0, 2);
|
|
_GPIOparams.in2Mode = (CGPIOin2::Modes)tVal;
|
|
break;
|
|
case 3:
|
|
switch(_ExtHold) {
|
|
case 0: _ExtHold = (dir > 0) ? 60000 : 0; break;
|
|
case 60000: _ExtHold = (dir > 0) ? 120000 : 0; break;
|
|
case 120000: _ExtHold = (dir > 0) ? 300000 : 60000; break;
|
|
case 300000: _ExtHold = (dir > 0) ? 600000 : 120000; break;
|
|
case 600000: _ExtHold = (dir > 0) ? 900000 : 300000; break;
|
|
case 900000: _ExtHold = (dir > 0) ? 1200000 : 600000; break;
|
|
case 1200000: _ExtHold = (dir > 0) ? 1800000 : 900000; break;
|
|
case 1800000: _ExtHold = (dir > 0) ? 3600000 : 1200000; break;
|
|
case 3600000: _ExtHold = (dir > 0) ? 3600000 : 1800000; break;
|
|
default: _ExtHold = 0; break;
|
|
}
|
|
break;
|
|
case 4:
|
|
tVal = _GPIOparams.in1Mode;
|
|
tVal += dir;
|
|
WRAPLIMITS(tVal, 0, 4);
|
|
_GPIOparams.in1Mode = (CGPIOin1::Modes)tVal;
|
|
break;
|
|
case 5: // outputs mode
|
|
tVal = _GPIOparams.out2Mode;
|
|
tVal += dir;
|
|
WRAPLIMITS(tVal, 0, 1);
|
|
_GPIOparams.out2Mode = (CGPIOout2::Modes)tVal;
|
|
break;
|
|
case 6: // outputs mode
|
|
tVal = _GPIOparams.out1Mode;
|
|
tVal += dir;
|
|
WRAPLIMITS(tVal, 0, 2);
|
|
_GPIOparams.out1Mode = (CGPIOout1::Modes)tVal;
|
|
break;
|
|
}
|
|
}
|
|
|
|
|