Ray Jones
a9e0a1e60d
Made release version V3.2.1
2020-06-22 12:15:57 +10:00
Ray Jones
21e17d1a2b
Fix for incoming MQTT status 1
...
Use pull up resistor for new HC-05 BT modules rx data
2020-05-21 07:27:06 +10:00
Ray Jones
3129a88cb9
Pretty stable with https library BUT #ifdef'd out actual https usage is is very temperamental ATM.
2020-05-03 21:59:56 +10:00
Ray Jones
b58ed90432
Found websocket write was blocking, returning 0, leading to WD reboot. Need to think of proper fix
2020-04-20 13:39:39 +10:00
Ray Jones
4eddcd0f1e
STA only mode
...
Fixed MQTT topic prefix
2020-04-08 07:51:52 +10:00
Ray Jones
7e1a4940ac
Added BME280 humidity and altitude information
...
Can start heater if high humidity
Altitude reported to heater per BMP180 in OEM controllers.
lowered min Hz limit to 500
2020-01-13 19:48:32 +11:00
Ray Jones
aabe6a54b3
Stabilised BME280 with DS18B20 coexistence
2019-10-18 12:55:16 +11:00
Ray Jones
f5a8c3c11e
BUG FIX: GPIO2 set for external thermostat sent dT as the Greek 'd' in the JSON - BAD - broke websocket
2019-08-19 05:33:07 +10:00
Ray Jones
1b3b478a49
Reset to original Arduino min_spiffs partition layout.
...
Fixed a residual screen refresh issue with cyclic enabled and max temp dialed up - marker stuck.
SPIFFS upload added to bootload.zip COM.bat
2019-07-30 19:21:55 +10:00
Ray Jones
c1207e66ef
Extreme makeover to timer manager, now properly shows one shot next day timers in timer chart.
...
Added cursor showing time of day on Timer chart.
2019-07-28 17:40:12 +10:00
Ray Jones
b6b0c7afbd
stylish /update & /formatspiffs
2019-07-11 18:55:31 +10:00
Ray Jones
de6226ad12
User settings loop now uses graphic symbology.
...
Added adjustable -ve threshold for Jess mode (cyclic shutdown if over temp).
Added user selectable display blank, dim or do nothing option on keypad inactivity.
Added user selectable menu timeout on keypad inactivity.
2019-04-27 20:41:47 +10:00
rljonesau
de2cd12770
Once again works with 192.168.100.1 as the SoftAP IP address
2019-01-14 09:00:43 +11:00
rljonesau
e6ea53496f
Fixed raw blue wire data reporting, now shows true raw data received (and sent by us)
...
Added state machine reporting toggle to debug menu
New state machine diagram
2018-12-22 08:48:39 +11:00
rljonesau
887c19c50a
Forces E-07 in JSON ErrorState and ErrorStateStr messages now when no heater data detected upon blue wire
...
V9 protocol document - ALTITUDE decoded!
2018-12-21 09:22:29 +11:00
rljonesau
9caf3cc097
Added dia file for state machine
2018-12-20 21:09:33 +11:00
rljonesau
4d0ae22961
Rename state machine "report" states to "validate" - better match in JSON world
...
State machine diagram updated to suit latest design with extra temperature read state
2018-12-20 20:59:53 +11:00
rljonesau
17f044b544
replaced protocol document with V8
2018-12-20 17:29:53 +11:00
rljonesau
221041d166
Added schematic for breakout PCB to assist development with DoIT(30pin) or Ai-Thinker(38pin) dev boards
2018-12-19 20:28:54 +11:00
rljonesau
efe8afeff3
Added Screen2 - simple presentation with ability to toggle thermostat and change set point (keypad)
2018-11-23 21:34:37 +11:00
rljonesau
fbeb78bd0f
Merged OtherCommandsTrial to master
2018-11-07 17:59:45 +11:00
rljonesau
ea8af6db09
Added debug messages if state machine gets thrown back to idle due to no bluewire rx data
...
Added protocol document!
2018-10-28 15:05:23 +11:00
rljonesau
a01bcea53d
Massive tidy up of heater data state machine, SOO much nicer now :-)
2018-10-27 21:30:01 +11:00