Update README.md
This commit is contained in:
parent
d19c60da33
commit
b783482803
|
@ -41,11 +41,14 @@ Working so far:
|
|||
* Battery backed Real Time Clock - DS3231
|
||||
* Prototype "Green PCB" in production, using naked ESP32 and HC-05 modules
|
||||
* Temperature readout in Celcius or Farenheit
|
||||
* Two new experimental thermostat modes (No practical testing - presently too hot in .au!):
|
||||
Tighten or loosen the thermostat temperature range by specifying a hysteresis value. eg tell the heater it is 23 degrees when it really is only 22.25 degrees (only 0.25 above set point).
|
||||
Request a linear change in Hz according to the deviation from the setpoint
|
||||
|
||||
|
||||
To be implemented
|
||||
--------------------------
|
||||
* Add 2 external digital inputs, 2 digital outputs, analogue input 433MHz Rx stream, 433MHz Tx stream connections. This would allow external timer units for example, or analogue temeprature demand (which is still only 1 degree resolution).
|
||||
* Implement narrow hysteresis to trick heater into a tighter thermostat temperature range. eg tell heater it is 23 degrees when it really is only 22.25 degrees (only 0.25 above set point).
|
||||
* MQTT pub/sub
|
||||
* "fuel gauge" - Integrate pump frequency, assuming a repeatable dose of fuel per pump cycle...
|
||||
* Expand hardware compatability with different MCU setups. IE Arduino Due/Mega/Pro ESP8266 & ESP32
|
||||
|
|
Loading…
Reference in a new issue