ESP32_ChinaDieselHeater_Con.../lib/RTClib/examples/ds1307nvram/ds1307nvram.ino

64 lines
1.7 KiB
Arduino
Raw Normal View History

// Example of using the non-volatile RAM storage on the DS1307.
// You can write up to 56 bytes from address 0 to 55.
// Data will be persisted as long as the DS1307 has battery power.
#include <Wire.h>
#include "RTClib.h"
#if defined(ARDUINO_ARCH_SAMD)
// for Zero, output on USB Serial console, remove line below if using programming port to program the Zero!
#define Serial SerialUSB
#endif
RTC_DS1307 rtc;
void printnvram(uint8_t address) {
Serial.print("Address 0x");
Serial.print(address, HEX);
Serial.print(" = 0x");
Serial.println(rtc.readnvram(address), HEX);
}
void setup () {
#ifndef ESP8266
while (!Serial); // for Leonardo/Micro/Zero
#endif
Serial.begin(57600);
rtc.begin();
// Print old RAM contents on startup.
Serial.println("Current NVRAM values:");
for (int i = 0; i < 6; ++i) {
printnvram(i);
}
// Write some bytes to non-volatile RAM storage.
// NOTE: You can only read and write from addresses 0 to 55 (i.e. 56 byte values).
Serial.println("Writing NVRAM values.");
// Example writing one byte at a time:
rtc.writenvram(0, 0xFE);
rtc.writenvram(1, 0xED);
// Example writing multiple bytes:
uint8_t writeData[4] = { 0xBE, 0xEF, 0x01, 0x02 };
rtc.writenvram(2, writeData, 4);
// Read bytes from non-volatile RAM storage.
Serial.println("Reading NVRAM values:");
// Example reading one byte at a time.
Serial.println(rtc.readnvram(0), HEX);
Serial.println(rtc.readnvram(1), HEX);
// Example reading multiple bytes:
uint8_t readData[4] = {0};
rtc.readnvram(readData, 4, 2);
Serial.println(readData[0], HEX);
Serial.println(readData[1], HEX);
Serial.println(readData[2], HEX);
Serial.println(readData[3], HEX);
}
void loop () {
// Do nothing in the loop.
}