3D_Printer_Firmware_Sparkcu.../electronic/Marlin-2.0.x-OCTOPUS/Marlin/src/HAL/DUE/usb/conf_access.h

117 lines
4.1 KiB
C
Executable File

/**
* \file
*
* \brief Memory access control configuration file.
*
* Copyright (c) 2012-2015 Atmel Corporation. All rights reserved.
*
* \asf_license_start
*
* \page License
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of Atmel may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* 4. This software may only be redistributed and used in connection with an
* Atmel microcontroller product.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* \asf_license_stop
*
*/
/*
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _CONF_ACCESS_H_
#define _CONF_ACCESS_H_
#include "compiler.h"
#include "../../../inc/MarlinConfigPre.h"
/*! \name Activation of Logical Unit Numbers
*/
//! @{
#define LUN_0 ENABLE //!< SD/MMC Card over MCI Slot 0.
#define LUN_1 DISABLE
#define LUN_2 DISABLE
#define LUN_3 DISABLE
#define LUN_4 DISABLE
#define LUN_5 DISABLE
#define LUN_6 DISABLE
#define LUN_7 DISABLE
#define LUN_USB DISABLE
//! @}
/*! \name LUN 0 Definitions
*/
//! @{
#define SD_MMC_SPI_MEM LUN_0
#define LUN_ID_SD_MMC_SPI_MEM LUN_ID_0
#define LUN_0_INCLUDE "sd_mmc_spi_mem.h"
#define Lun_0_test_unit_ready sd_mmc_spi_test_unit_ready
#define Lun_0_read_capacity sd_mmc_spi_read_capacity
#define Lun_0_unload sd_mmc_spi_unload
#define Lun_0_wr_protect sd_mmc_spi_wr_protect
#define Lun_0_removal sd_mmc_spi_removal
#define Lun_0_usb_read_10 sd_mmc_spi_usb_read_10
#define Lun_0_usb_write_10 sd_mmc_spi_usb_write_10
#define LUN_0_NAME "\"SD/MMC Card\""
//! @}
/*! \name Actions Associated with Memory Accesses
*
* Write here the action to associate with each memory access.
*
* \warning Be careful not to waste time in order not to disturb the functions.
*/
//! @{
#define memory_start_read_action(nb_sectors)
#define memory_stop_read_action()
#define memory_start_write_action(nb_sectors)
#define memory_stop_write_action()
//! @}
/*! \name Activation of Interface Features
*/
//! @{
#define ACCESS_USB true //!< MEM <-> USB interface.
#define ACCESS_MEM_TO_RAM false //!< MEM <-> RAM interface.
#define ACCESS_STREAM false //!< Streaming MEM <-> MEM interface.
#define ACCESS_STREAM_RECORD false //!< Streaming MEM <-> MEM interface in record mode.
#define ACCESS_MEM_TO_MEM false //!< MEM <-> MEM interface.
#define ACCESS_CODEC false //!< Codec interface.
//! @}
/*! \name Specific Options for Access Control
*/
//! @{
#define GLOBAL_WR_PROTECT false //!< Management of a global write protection.
//! @}
#endif // _CONF_ACCESS_H_