/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * PWM print routines for Atmel 8 bit AVR CPUs */ #include "../../inc/MarlinConfig.h" #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS #if MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14) #define AVR_ATmega2560_FAMILY_PLUS_70 1 #endif #if AVR_AT90USB1286_FAMILY // Working with Teensyduino extension so need to re-define some things #include "pinsDebug_Teensyduino.h" // Can't use the "digitalPinToPort" function from the Teensyduino type IDEs // portModeRegister takes a different argument #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p) #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p) #define digitalPinToPort_DEBUG(p) digitalPinToPort(p) #define GET_PINMODE(pin) (*portModeRegister(pin) & digitalPinToBitMask_DEBUG(pin)) #elif AVR_ATmega2560_FAMILY_PLUS_70 // So we can access/display all the pins on boards using more than 70 #include "pinsDebug_plus_70.h" #define digitalPinToTimer_DEBUG(p) digitalPinToTimer_plus_70(p) #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask_plus_70(p) #define digitalPinToPort_DEBUG(p) digitalPinToPort_plus_70(p) bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); } #else #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p) #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p) #define digitalPinToPort_DEBUG(p) digitalPinToPort(p) bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); } #define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin) #endif #define VALID_PIN(pin) (pin >= 0 && pin < NUM_DIGITAL_PINS ? 1 : 0) #if AVR_ATmega1284_FAMILY #define DIGITAL_PIN_TO_ANALOG_PIN(P) int(analogInputToDigitalPin(0) - (P)) #define IS_ANALOG(P) ((P) >= analogInputToDigitalPin(7) && (P) <= analogInputToDigitalPin(0)) #else #define DIGITAL_PIN_TO_ANALOG_PIN(P) int((P) - analogInputToDigitalPin(0)) #define IS_ANALOG(P) ((P) >= analogInputToDigitalPin(0) && ((P) <= analogInputToDigitalPin(15) || (P) <= analogInputToDigitalPin(7))) #endif #define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin) #define MULTI_NAME_PAD 26 // space needed to be pretty if not first name assigned to a pin void PRINT_ARRAY_NAME(uint8_t x) { char *name_mem_pointer = (char*)pgm_read_ptr(&pin_array[x].name); LOOP_L_N(y, MAX_NAME_LENGTH) { char temp_char = pgm_read_byte(name_mem_pointer + y); if (temp_char != 0) SERIAL_CHAR(temp_char); else { LOOP_L_N(i, MAX_NAME_LENGTH - y) SERIAL_CHAR(' '); break; } } } #define GET_ARRAY_IS_DIGITAL(x) pgm_read_byte(&pin_array[x].is_digital) #if defined(__AVR_ATmega1284P__) // 1284 IDE extensions set this to the number of #undef NUM_DIGITAL_PINS // digital only pins while all other CPUs have it #define NUM_DIGITAL_PINS 32 // set to digital only + digital/analog #endif #define PWM_PRINT(V) do{ sprintf_P(buffer, PSTR("PWM: %4d"), V); SERIAL_ECHO(buffer); }while(0) #define PWM_CASE(N,Z) \ case TIMER##N##Z: \ if (TCCR##N##A & (_BV(COM##N##Z##1) | _BV(COM##N##Z##0))) { \ PWM_PRINT(OCR##N##Z); \ return true; \ } else return false /** * Print a pin's PWM status. * Return true if it's currently a PWM pin. */ static bool pwm_status(uint8_t pin) { char buffer[20]; // for the sprintf statements switch (digitalPinToTimer_DEBUG(pin)) { #if defined(TCCR0A) && defined(COM0A1) #ifdef TIMER0A #if !AVR_AT90USB1286_FAMILY // not available in Teensyduino type IDEs PWM_CASE(0, A); #endif #endif PWM_CASE(0, B); #endif #if defined(TCCR1A) && defined(COM1A1) PWM_CASE(1, A); PWM_CASE(1, B); #if defined(COM1C1) && defined(TIMER1C) PWM_CASE(1, C); #endif #endif #if defined(TCCR2A) && defined(COM2A1) PWM_CASE(2, A); PWM_CASE(2, B); #endif #if defined(TCCR3A) && defined(COM3A1) PWM_CASE(3, A); PWM_CASE(3, B); #ifdef COM3C1 PWM_CASE(3, C); #endif #endif #ifdef TCCR4A PWM_CASE(4, A); PWM_CASE(4, B); PWM_CASE(4, C); #endif #if defined(TCCR5A) && defined(COM5A1) PWM_CASE(5, A); PWM_CASE(5, B); PWM_CASE(5, C); #endif case NOT_ON_TIMER: default: return false; } SERIAL_ECHO_SP(2); } // pwm_status const volatile uint8_t* const PWM_other[][3] PROGMEM = { { &TCCR0A, &TCCR0B, &TIMSK0 }, { &TCCR1A, &TCCR1B, &TIMSK1 }, #if defined(TCCR2A) && defined(COM2A1) { &TCCR2A, &TCCR2B, &TIMSK2 }, #endif #if defined(TCCR3A) && defined(COM3A1) { &TCCR3A, &TCCR3B, &TIMSK3 }, #endif #ifdef TCCR4A { &TCCR4A, &TCCR4B, &TIMSK4 }, #endif #if defined(TCCR5A) && defined(COM5A1) { &TCCR5A, &TCCR5B, &TIMSK5 }, #endif }; const volatile uint8_t* const PWM_OCR[][3] PROGMEM = { #ifdef TIMER0A { &OCR0A, &OCR0B, 0 }, #else { 0, &OCR0B, 0 }, #endif #if defined(COM1C1) && defined(TIMER1C) { (const uint8_t*)&OCR1A, (const uint8_t*)&OCR1B, (const uint8_t*)&OCR1C }, #else { (const uint8_t*)&OCR1A, (const uint8_t*)&OCR1B, 0 }, #endif #if defined(TCCR2A) && defined(COM2A1) { &OCR2A, &OCR2B, 0 }, #endif #if defined(TCCR3A) && defined(COM3A1) #ifdef COM3C1 { (const uint8_t*)&OCR3A, (const uint8_t*)&OCR3B, (const uint8_t*)&OCR3C }, #else { (const uint8_t*)&OCR3A, (const uint8_t*)&OCR3B, 0 }, #endif #endif #ifdef TCCR4A { (const uint8_t*)&OCR4A, (const uint8_t*)&OCR4B, (const uint8_t*)&OCR4C }, #endif #if defined(TCCR5A) && defined(COM5A1) { (const uint8_t*)&OCR5A, (const uint8_t*)&OCR5B, (const uint8_t*)&OCR5C }, #endif }; #define TCCR_A(T) pgm_read_word(&PWM_other[T][0]) #define TCCR_B(T) pgm_read_word(&PWM_other[T][1]) #define TIMSK(T) pgm_read_word(&PWM_other[T][2]) #define CS_0 0 #define CS_1 1 #define CS_2 2 #define WGM_0 0 #define WGM_1 1 #define WGM_2 3 #define WGM_3 4 #define TOIE 0 #define OCR_VAL(T, L) pgm_read_word(&PWM_OCR[T][L]) static void err_is_counter() { SERIAL_ECHOPGM(" non-standard PWM mode"); } static void err_is_interrupt() { SERIAL_ECHOPGM(" compare interrupt enabled"); } static void err_prob_interrupt() { SERIAL_ECHOPGM(" overflow interrupt enabled"); } static void print_is_also_tied() { SERIAL_ECHOPGM(" is also tied to this pin"); SERIAL_ECHO_SP(14); } inline void com_print(const uint8_t N, const uint8_t Z) { const uint8_t *TCCRA = (uint8_t*)TCCR_A(N); SERIAL_ECHOPGM(" COM", AS_DIGIT(N)); SERIAL_CHAR(Z); SERIAL_ECHOPGM(": ", int((*TCCRA >> (6 - Z * 2)) & 0x03)); } void timer_prefix(uint8_t T, char L, uint8_t N) { // T - timer L - pwm N - WGM bit layout char buffer[20]; // for the sprintf statements const uint8_t *TCCRB = (uint8_t*)TCCR_B(T), *TCCRA = (uint8_t*)TCCR_A(T); uint8_t WGM = (((*TCCRB & _BV(WGM_2)) >> 1) | (*TCCRA & (_BV(WGM_0) | _BV(WGM_1)))); if (N == 4) WGM |= ((*TCCRB & _BV(WGM_3)) >> 1); SERIAL_ECHOPGM(" TIMER", AS_DIGIT(T)); SERIAL_CHAR(L); SERIAL_ECHO_SP(3); if (N == 3) { const uint8_t *OCRVAL8 = (uint8_t*)OCR_VAL(T, L - 'A'); PWM_PRINT(*OCRVAL8); } else { const uint16_t *OCRVAL16 = (uint16_t*)OCR_VAL(T, L - 'A'); PWM_PRINT(*OCRVAL16); } SERIAL_ECHOPGM(" WGM: ", WGM); com_print(T,L); SERIAL_ECHOPGM(" CS: ", (*TCCRB & (_BV(CS_0) | _BV(CS_1) | _BV(CS_2)) )); SERIAL_ECHOPGM(" TCCR", AS_DIGIT(T), "A: ", *TCCRA); SERIAL_ECHOPGM(" TCCR", AS_DIGIT(T), "B: ", *TCCRB); const uint8_t *TMSK = (uint8_t*)TIMSK(T); SERIAL_ECHOPGM(" TIMSK", AS_DIGIT(T), ": ", *TMSK); const uint8_t OCIE = L - 'A' + 1; if (N == 3) { if (WGM == 0 || WGM == 2 || WGM == 4 || WGM == 6) err_is_counter(); } else { if (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13) err_is_counter(); } if (TEST(*TMSK, OCIE)) err_is_interrupt(); if (TEST(*TMSK, TOIE)) err_prob_interrupt(); } static void pwm_details(uint8_t pin) { switch (digitalPinToTimer_DEBUG(pin)) { #if defined(TCCR0A) && defined(COM0A1) #ifdef TIMER0A #if !AVR_AT90USB1286_FAMILY // not available in Teensyduino type IDEs case TIMER0A: timer_prefix(0, 'A', 3); break; #endif #endif case TIMER0B: timer_prefix(0, 'B', 3); break; #endif #if defined(TCCR1A) && defined(COM1A1) case TIMER1A: timer_prefix(1, 'A', 4); break; case TIMER1B: timer_prefix(1, 'B', 4); break; #if defined(COM1C1) && defined(TIMER1C) case TIMER1C: timer_prefix(1, 'C', 4); break; #endif #endif #if defined(TCCR2A) && defined(COM2A1) case TIMER2A: timer_prefix(2, 'A', 3); break; case TIMER2B: timer_prefix(2, 'B', 3); break; #endif #if defined(TCCR3A) && defined(COM3A1) case TIMER3A: timer_prefix(3, 'A', 4); break; case TIMER3B: timer_prefix(3, 'B', 4); break; #ifdef COM3C1 case TIMER3C: timer_prefix(3, 'C', 4); break; #endif #endif #ifdef TCCR4A case TIMER4A: timer_prefix(4, 'A', 4); break; case TIMER4B: timer_prefix(4, 'B', 4); break; case TIMER4C: timer_prefix(4, 'C', 4); break; #endif #if defined(TCCR5A) && defined(COM5A1) case TIMER5A: timer_prefix(5, 'A', 4); break; case TIMER5B: timer_prefix(5, 'B', 4); break; case TIMER5C: timer_prefix(5, 'C', 4); break; #endif case NOT_ON_TIMER: break; } SERIAL_ECHOPGM(" "); // on pins that have two PWMs, print info on second PWM #if AVR_ATmega2560_FAMILY || AVR_AT90USB1286_FAMILY // looking for port B7 - PWMs 0A and 1C if (digitalPinToPort_DEBUG(pin) == 'B' - 64 && 0x80 == digitalPinToBitMask_DEBUG(pin)) { #if !AVR_AT90USB1286_FAMILY SERIAL_ECHOPGM("\n ."); SERIAL_ECHO_SP(18); SERIAL_ECHOPGM("TIMER1C"); print_is_also_tied(); timer_prefix(1, 'C', 4); #else SERIAL_ECHOPGM("\n ."); SERIAL_ECHO_SP(18); SERIAL_ECHOPGM("TIMER0A"); print_is_also_tied(); timer_prefix(0, 'A', 3); #endif } #else UNUSED(print_is_also_tied); #endif } // pwm_details #ifndef digitalRead_mod // Use Teensyduino's version of digitalRead - it doesn't disable the PWMs int digitalRead_mod(const int8_t pin) { // same as digitalRead except the PWM stop section has been removed const uint8_t port = digitalPinToPort_DEBUG(pin); return (port != NOT_A_PIN) && (*portInputRegister(port) & digitalPinToBitMask_DEBUG(pin)) ? HIGH : LOW; } #endif #ifndef PRINT_PORT void print_port(int8_t pin) { // print port number #ifdef digitalPinToPort_DEBUG uint8_t x; SERIAL_ECHOPGM(" Port: "); #if AVR_AT90USB1286_FAMILY x = (pin == 46 || pin == 47) ? 'E' : digitalPinToPort_DEBUG(pin) + 64; #else x = digitalPinToPort_DEBUG(pin) + 64; #endif SERIAL_CHAR(x); #if AVR_AT90USB1286_FAMILY if (pin == 46) x = '2'; else if (pin == 47) x = '3'; else { uint8_t temp = digitalPinToBitMask_DEBUG(pin); for (x = '0'; x < '9' && temp != 1; x++) temp >>= 1; } #else uint8_t temp = digitalPinToBitMask_DEBUG(pin); for (x = '0'; x < '9' && temp != 1; x++) temp >>= 1; #endif SERIAL_CHAR(x); #else SERIAL_ECHO_SP(10); #endif } #define PRINT_PORT(p) print_port(p) #endif #define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0) #define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d) "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)